Placement
Seat
Con gurations
Drilling Required Recommended Pole Solution Weight Height Width Depth
Passenger side on
the oor, under
the seat
Bucket/Bench
No - attaches seat studs:
Ram 1500-5500 (2002-2013)
Sterling Bullet 4500-5500
(2008)
Without factory console:
Lower Tube: DS-LOWER-7
Upper Pole: QADJ-UPPER-L
O set Mounting Step: DS-STEP
Support Brace: 7160-0230
Motion Attachment: 7160-0419
(CLEVIS)
Tubes/Poles and Motion
Attachments ordered separately
4.1 lbs 3.58” 18.25” 5.08”
Features:
• Heavy gauge steel construction for long-term durability
• Black powdercoat nish for maximum corrosion resistance
• Will not interfere with levers or factory installed consoles
• An O set Universal Mounting Step (Item No. DS-STEP) maybe ordered separately to move the pole away from
passenger leg space
Note - 1.) If your Dodge Ram has a factory installed console and/or manual shift on the oor, the recommended pole
solution is DS-LOWER-13, QADJ-UPPER-M, 7160-0230 and 7160-0284 (QUAD MOTION TS3).
2.) If your Sterling Bullet has a factory installed console and/or manual shift on the oor, the recommended pole
solution is DS-LOWER-9, QADJ-UPPER-L,7160-0230 and 7160-0419 (CLEVIS).
Item No. 7160-0182
W
D
H
3001 Borham Ave. | Stevens Point, WI 54481, USA
Phone: 715.344-3482 | Toll-free: 800.487-9220 | Fax: 715.344-5209
Email: [email protected] | Website: www.gamberjohnson.com
This document, including images, may not be reproduced partly or fully without the expressed written
consent of Gamber-Johnson’s Marketing Department. © Copyright 2012 Gamber-Johnson LLC
EXCEPTIONAL ENGINEERING | ROCK SOLID | EXTENSIVE TESTING
RAM 15005500 20022013
RAM 15005500 20022013
STERLING BULLET 45005500 2008
STERLING BULLET 45005500 2008
/