2. Computers & electronics
  3. Computer components
  4. Chassis components
  5. Mounting kits
  6. Gamber-Johnson
  7. DS-STEP

Gamber-Johnson DS-STEP Datasheet

  • Hello! I am an AI chatbot trained to assist you with the Gamber-Johnson DS-STEP Datasheet. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Placement Drilling Required Pole Weight Height Width Depth
Any MCS Top Plate or Vehicle
Base without a welded pole or
directly to the  oor
No - When mounting onto a Vehicle Base
or MCS Top Plate
Ye s - when mounting directly to the vehicle  oor
Order Lower
and Upper Tube
separately
3.0 lbs 4.0” 3.5” 3.5”
Features:
• Heavy gauge steel construction for long-term durability
• Black powdercoat  nish for maximum corrosion resistance
• Will not interfere with levers or factory-installed console
• The O set Universal Mounting Step is already included in the following Vehicle Bases (Item No. DS-112, DS-118,
DS-120, DS-124, DS-132, DS-142, DS-144, DS-150, 7160-0036, 7160-0046, 7160-0055, 7160-0222, 7160-0234,
7160-0256, 7160-0260, 7160-0262, 7160-0281, 7160-0323, 7160-0342 or 7160-0350) however, additional O set
Universal Mounting Steps can be ordered to stack on top of each other if needed
• Is not compatible with the following Vehicle Bases (Item No. DS-52, DS-53, DS-56, DS-57, DS-100, DS-138,
7160-0090, 7160-0116, 7160-0133, 7160-0198, 7160-0248 or 7160-0451)
Item No. DS-STEP
W
D
H
3001 Borham Ave. | Stevens Point, WI 54481, USA
Phone: 715.344-3482 | Toll-free: 800.487-9220 | Fax: 715.344-5209
Email: [email protected] | Website: www.gamberjohnson.com
This document, including images, may not be reproduced partly or fully without the expressed written
consent of Gamber-Johnson’s Marketing Department. © Copyright 2012 Gamber-Johnson LLC
EXCEPTIONAL ENGINEERING | ROCK SOLID | EXTENSIVE TESTING
OFFSET UNIVERSAL MOUNTING STEP
OFFSET UNIVERSAL MOUNTING STEP
/