Placement Seat Con gurations Drilling Required Pole Weight Height Width Depth
Passenger side on the oor,
on top of seat bracket
Bucket/Bench
No - attaches seat studs:
Ford Ranger(1993-2011)
Ford Explorer (1995-2001)
Ordered separately 7.0 lbs 6.25” 12.0” 7.5”
Features:
• Heavy gauge steel construction for long-term durability
• Black powdercoat nish for maximum corrosion resistance
• Angled Step moves pole away from passenger leg space
• Won’t interfere with levers or factory-installed console or 4WD lever on oor
• One O set Universal Mounting Step (Item No. DS-STEP) is already included with this vehicle base. However,
additional O set Universal Mounting Steps can be ordered to stack on top of each other if needed.
Item No. DS-118
W
D
H
3001 Borham Ave. | Stevens Point, WI 54481, USA
Phone: 715.344-3482 | Toll-free: 800.487-9220 | Fax: 715.344-5209
This document, including images, may not be reproduced partly or fully without the expressed written
consent of Gamber-Johnson’s Marketing Department. © Copyright 2012 Gamber-Johnson LLC
EXCEPTIONAL ENGINEERING | ROCK SOLID | EXTENSIVE TESTING
FORD RANGER 19932011
FORD EXPLORER 19952001
FORD EXPLORER 19952001