Placement Tilt Swivel Slide Weight Height Width Depth
Any Upper Pole, Complete Pole,
Low Pro le Brackets or any Smiley
Face Pattern
Ye s - up to 90°
fore/30° aft
Ye s - up to 60°
right/60° left
No 1.25 lbs 2.34” 5.0” 4.27”
Features:
• New Clevis combines the tilt capabilities of the DS-CLEVIS and the CLEVIS 0-90 into one device
• Tilt capabilities:
• 90° forward allows for tablets to be easily mounted
• 30° aft movement with a positive stop at 30°
• Riveted design allows for smoother tilt movement
• Swivel capabilities:
• 60° right/60° left
• Easier installation:
• Open throat design for ease of mounting to docking stations and cradles
• Fixed mounting studs
• Does not require smiley face pattern for mounting. Built in swivel function allows Clevis to be mounted on any flat,
rigid surface. When mounted to a smiley face pattern the built in swivel function gives the user more flexibility of
the Clevis positioning during installation.
• Rear fastening stud allows the Clevis to be locked in a xed position
• Lever provides a secure clamping force when tilted
• Heavy gauge steel construction for long-term durability
• Black powdercoat nish for maximum corrosion resistance
Note: This item replaces Item No. DS-CLEVIS and the CLEVIS 0-90
Item No. 7160-0419
D
W
H
3001 Borham Ave. | Stevens Point, WI 54481, USA
Phone: 715.344-3482 | Toll-free: 800.487-9220 | Fax: 715.344-5209
Email: [email protected] | Website: www.gamberjohnson.com
This document, including images, may not be reproduced partly or fully without the expressed written
consent of Gamber-Johnson’s Marketing Department. © Copyright 2012 Gamber-Johnson LLC
EXCEPTIONAL ENGINEERING | ROCK SOLID | EXTENSIVE TESTING
CLEVIS TILT/SWIVEL MOTION ATTACHMENT
CLEVIS TILT/SWIVEL MOTION ATTACHMENT
NEW
Tilt Shown: 30° aft Tilt Shown: 90° fore
/