2. iFixit
  3. HTC Ozone Frame Replacement
HTC Ozone Frame Replacement

iFixit HTC Ozone Frame Replacement User manual

  • I have reviewed the provided user guide for the HTC Ozone related to its plastic frame replacement. It details the process of removing the rear cover, battery, and frame, providing clear steps for accessing internal components. I'm ready to answer any questions you have about this process or the tools involved.
  • What is the purpose of this guide?
    What tools are needed for this procedure?
    How is the battery removed?
HTC Ozone Frame Replacement
Removal of the plastic frame in order to gain access to internal components.
Written By: Marco Jokada
HTC Ozone Frame Replacement
Draft: 2022-05-11Guide ID: 5523 -
This document was generated on 2022-05-26 06:14:17 AM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 5
INTRODUCTION
Internal components of a cell phone device are protected by a plastic frame (i.e. motherboard,
keyboard, screen, etc.)
TOOLS:
iFixit Opening Tool (1)
T5 Torx Screwdriver (1)
HTC Ozone Frame Replacement
Draft: 2022-05-11Guide ID: 5523 -
This document was generated on 2022-05-26 06:14:17 AM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 2 of 5
Step 1 — Rear Battery Cover
Flip the phone over to have the rear
cover facing up.
The camera lens should be
towards the top of the phone.
Step 2
Slide the cover up, towards the top of phone, to unlock the battery cover.
Lift the cover off phone and remove it.
HTC Ozone Frame Replacement
Draft: 2022-05-11Guide ID: 5523 -
This document was generated on 2022-05-26 06:14:17 AM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 3 of 5
Step 3 — Battery
Use your finger to push the top of the battery downwards and lift the battery out of the phone.
Step 4 — Frame
Remove the six Torx #5 screws that are securing the rear frame.
HTC Ozone Frame Replacement
Draft: 2022-05-11Guide ID: 5523 -
This document was generated on 2022-05-26 06:14:17 AM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 4 of 5
To reassemble your device, follow these instructions in reverse order.
Step 5
Pry the frame open, releasing the eight plastic tabs around the edge of the frame, using the plastic
opening tool.
A plastic card can be used instead of the plastic opening tool.
HTC Ozone Frame Replacement
Draft: 2022-05-11Guide ID: 5523 -
This document was generated on 2022-05-26 06:14:17 AM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 5 of 5
/