iFixit Palm Treo Pro Battery Replacement Installation guide

  • Hello! I have reviewed the provided document, which is a user guide for Palm Treo Pro battery replacement. I'm ready to answer your questions based on the instructions given in the guide, such as removing the old battery, installing a new one, or disassembling the device.
  • How do I remove the back cover?
    How do I remove existing battery?
    How do I insert new battery?
Palm Treo Pro Battery Replacement
Boost your phone's sustainability by replacing the battery.
Written By: Kyle Gilbert
Palm Treo Pro Battery Replacement
Draft: 2022-10-18Guide ID: 14116 -
This document was generated on 2022-10-19 12:16:30 AM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 3
INTRODUCTION
In this guide you will learn how to install a battery into your Palm Treo Pro.
PARTS:
Palm Treo Pro Battery (1)
Palm Treo Pro Battery Replacement
Draft: 2022-10-18Guide ID: 14116 -
This document was generated on 2022-10-19 12:16:30 AM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 2 of 3
To reassemble your device, follow these instructions in reverse order.
Step 1 — Battery
Press down on the back of the case and slide forward to remove it.
Step 2
If a battery is already installed,
remove it by pulling up on the tab
near the camera lens.
Insert the new battery into the open
slot. Make sure the battery is
oriented so that the Palm logo is in
the upper-left corner opposite the
camera lens.
Palm Treo Pro Battery Replacement
Draft: 2022-10-18Guide ID: 14116 -
This document was generated on 2022-10-19 12:16:30 AM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 3 of 3
/