2. VISUAL COMFORT
  3. SL 3845
SL 3845

VISUAL COMFORT SL 3845 User manual

  • Hello! I've reviewed the assembly instructions for the Visual Comfort SL 3845 Bull Nose Cylinder Table Lamp. This document provides steps on how to install the harp, attach the shade, insert the bulb, and remove the plug cover. I'm ready to answer your questions about assembling and caring for your lamp.
  • What is the first step in the assembly process?
    What should be done after installing the harp?
    What should you do with the plug cover before testing?
Bull Nose Cylinder Table Lamp
Item # SL 3845
ASSEMBLY INSTRUCTIONS
This light fixture should be installed in accordance with all applicable,
local installation codes, and by a person familiar with the construction
and operation of it, as well as the hazards involved. Inspect item and
contents carefully. If any damage or defect is found, do not install.
Retain all packaging material until installation is complete and approved.
NOTICE:
US
M
L
I
D
S
E
T
1. Carefully remove all parts from the box.
2. Install harp (C) onto the saddle (D).
3. Place shade (B) to the harp (C) and secure with finial (A).
4. Insert bulb (not included) into the socket.
5. Remove protective plug cover (E) from the plug.
6. Plug into a proper electrical outlet and test the fixture.
7. Installation is complete.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not
use abrasive or chemical agents.
Bulb
(Not included)
A
B
C
D
E
/