2. VISUAL COMFORT
  3. CHA 8983

VISUAL COMFORT CHA 8983 User manual

  • Hello! I've reviewed the user manual for the Visual Comfort CHA 8983 table lamp. This document provides instructions on how to assemble the lamp, including how to install the harp, shade, and bulb. It also outlines important care instructions. I'm ready to answer any questions you have about the lamp and its setup.
  • What should I do if I find damage or a defect?
    What should I use to clean the lamp?
    Is the bulb included?
Large Crystal Panel Table Lamp
Item # CHA 8983
ASSEMBLY INSTRUCTIONS
This light fixture should be installed in accordance with all applicable,
local installation codes, and by a person familiar with the construction
and operation of it, as well as the hazards involved. Inspect item and
contents carefully. If any damage or defect is found, do not install.
Retain all packaging material until installation is complete and approved.
NOTICE:
US
M
L
I
D
S
E
T
1. Carefully remove all parts from the box.
CAUTION: Please take out the lamp body as the left drawing shows.
2. Install harp (C) onto the saddle (D).
3. Place shade (B) to the harp (C) and secure with finial (A).
4. Insert bulb (not included) into the socket.
5. Remove protective plug cover (E) from the plug.
6. Plug into a proper electrical outlet and test the fixture.
7. Installation is complete.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not
use abrasive or chemical agents.
E
Bulb
(Not included)
A
B
C
D
/