VISUAL COMFORT CHA 8924 User manual

  • Hello! I've reviewed the assembly instructions for the Visual Comfort Table Lamp CHA 8924. This document provides a step-by-step guide on how to assemble the lamp, including installing the harp, shade, and bulb. I'm ready to answer any questions you may have about the instructions or the lamp itself.
  • What should I do if I find damage or defects upon inspection?
    What should I use to clean the lamp?
    What is included in the package?
Balustrade Table Lamp
Item # CHA 8924
ASSEMBLY INSTRUCTIONS
This light fixture should be installed in accordance with all applicable,
local installation codes, and by a person familiar with the construction
and operation of it, as well as the hazards involved. Inspect item and
contents carefully. If any damage or defect is found, do not install.
Retain all packaging material until installation is complete and approved.
NOTICE:
US
M
L
I
D
S
E
T
1. Carefully remove all parts from the box.
2. Install harp (C) onto the saddle (D).
3. Place shade (B) to the harp (C) and secure with finial (A).
4. Insert bulb (not included) into the socket.
5. Remove protective plug cover (E) from the plug.
6. Plug into a proper electrical outlet and test the fixture.
7. Installation is complete.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not
use abrasive or chemical agents.
/