Trend TF70011AB User manual

I've reviewed the installation instructions for the TREND TF70011AB light fixture. The document outlines the assembly and installation process, including steps for attaching the harp, shade, and finial. I'm ready to answer any questions you may have about the document or the installation process.
What should I do before installing the fixture?

What should I do if I am not familiar with electrical wiring?

What components are required for assembly?

TF70011AB

INSTALLATION INSTRUCTIONS

Please read carefully and save these instructions, as you may need them at a later date.

CAUTION

GENERAL

All electrical connections must be in accordance with local and National Electrical Code (N.E.C.)

standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a

qualified electrician.

Remove the fixture and the mounting package from the box and make sure that no parts are missing by

referencing the illustrations on the installation instructions.

WARNING: Risk of Fire. Consult a qualified electrician to ensure correct branch circuit conductor.

Min 90ºC supply conductors.

Turn off the main power at the circuit breaker before installing the fixture, in order to prevent possible

shock.

ASSEMBLY AND INSTALLATION

1. Loosen the harp caps on harp (03) and insert the bottom ends of harp (03) into saddle (04).

2. Tighten the harp caps on harp (03) until they cover the two-pronged saddle (04).

3. Unscrew the finial (01) from the top of harp (03).

4. Place shade (02) over the harp (03) making sure the harp top extends through the top ring of shade (02), and

secure shade (03) with finial (01).

5. Install bulb (not included). Do not exceed maximum recommended wattage.

INSTALLATION IS NOW COMPLETE

01. FINIAL

02. SHADE

03. HARP

04. SADDLE