2. SMITH SYSTEM
  3. 66014

SMITH SYSTEM 66014, 66013 Assembly Instructions

  • Hello! I've reviewed the installation instructions for the SMITHSYSTEM Interchange SW Tote Tray Housing. This document includes a parts list, tool requirements, and detailed steps for proper installation. I'm ready to answer any questions you might have about the installation process or the product itself.
  • What tool is needed for installation?
    What should I do if I have damaged or missing components?
    What are the installation steps?
If you have damaged or missing components please contact customer service.
800-328-1061
www.smithsystem.com
Page 1 of 2
#66013 / #66014
INTERCHANGE SW TOTE TRAY
HOUSING INSTALLATION
INSTALLATION TOOLS:
PARTS LIST:
#66013:
Interchange SW Tote w/ housing
#66014: Interchange SW (standard width) housing only.
Phillips-Head Screwdriver
If you have damaged or missing components please contact customer service.
800-328-1061
www.smithsystem.com
Page 2 of 2
INSTALLATION:
1: Turn Table over on a flat smooth work surface.
2. Remove Tote from Tote Bracket Assembly and place Tote Bracket on desk as shown.
3. Install wood screws included with Tote Bracket Assembly into holes on both the front
and back bracket.
4. Flip desk over and insert Tote to complete installation.
/