Medtronic MINIMED 630G is an advanced insulin pump system designed to make diabetes management easier and more effective. With its user-friendly interface, customizable settings, and integrated continuous glucose monitoring (CGM), the 630G offers precise insulin delivery and real-time glucose readings for better blood sugar control.
Medtronic MINIMED 630G is an advanced insulin pump system designed to make diabetes management easier and more effective. With its user-friendly interface, customizable settings, and integrated continuous glucose monitoring (CGM), the 630G offers precise insulin delivery and real-time glucose readings for better blood sugar control.
TRANSFER SETTINGS
MiniMed
®
630G Replacement Pump
STEP 1: Before you send your original pump back, copy your current settings onto the
Insulin Pump Settings Form. If for any reason you cannot copy the settings, please
contact your healthcare professional or reference your CareLink
®
Personal reports.
STEP 2: Insert a AA battery into your new pump. You can use either a lithium, alkaline or
rechargeable battery.
STEP 3: Follow the instructions found in this guide to enter the settings that you have
recorded on the Insulin Pump Settings Form into your new pump.
1
INSULIN SETTINGS
BOLUS WIZARD SETUP
Menu > Insulin Settings > Bolus Wizard Setup
Bolus Wizard: , On , O
Carb Ratio:
12:00
A ______ - ______ g/U
__________ ______ - ______ g/U
__________ ______ - ______ g/U
Insulin Sensitivity Factor:
12:00
A ______ - ______ mg/dL per U
__________ ______ - ______ mg/dL per U
__________ ______ - ______ mg/dL per U
BG Target:
12:00
A ______ - ______ mg/dL
__________ ______ - ______ mg/dL
__________ ______ - ______ mg/dL
Active Insulin Time: ____________ hr
BASAL PATTERN SETUP
Menu > Insulin Settings > Basal Pattern Setup
Basal 1:
12:00
A _______ U/hr
_______ _______ U/hr
_______ _______ U/hr
PRESET TEMP SETUP
Menu > Insulin Settings > Preset Temp Setup
Preset Temp Name: ____________________________
Type _____ Percent _____ % Duration _____ hr
DUAL/SQUARE WAVE:
Dual: , On , O Square: , On , O
PRESET BOLUS SETUP
Menu > Insulin Settings > Preset Bolus Setup
Preset Bolus Name: ____________________________
Bolus: _________ U Type: ____________________
% ______ Now ______ Square Duration _____ hr
INSULIN SETTINGS (continued)
PRESET BOLUS SETUP
Menu > Insulin Settings > Preset Bolus Setup
Preset Bolus Name: ____________________________
Bolus: _________ U Type: ____________________
% ______ Now ______ Square Duration _____ hr
BOLUS INCREMENT:
, 0.025U , 0.05U , 0.1U
MAX BASAL/BOLUS:
Max Basal: ________ U/hr Max Bolus: _______ U
EASY BOLUS:
, On , O Step Size _______ U
AUTO SUSPEND:
, On ________ hr , O
BOLUS SPEED:
, Standard , Quick
REMINDERS
Menu > Reminders
PERSONAL:
Name: _________________ Time: __________ AM / PM
Name: _________________ Time: __________ AM / PM
BOLUS BG CHECK: , On , O
MISSED MEAL BOLUS:
Meal 1: ________
AM / PM - _______ AM / PM
Meal 2: ________
AM / PM - _______ AM / PM
Meal 3: ________
AM / PM - _______ AM / PM
LOW RESERVOIR:
, Units: _______ U , Time: ________ hr
SET CHANGE:
, On ______ days , O
UTILITIES
Menu > Utilities
DISPLAY OPTIONS:
Brightness ____ , Auto Backlight ________ sec / min
REMOTE BOLUS: , On , O
CARB UNIT:
, Grams , Exchanges
We recommend that you record all settings on this form to refer to as you enter them into new pump.
Basal Pattern Name: _________
12:00
A _______ U/hr
_______ _______ U/hr
_______ _______ U/hr
Time Period Low Limit Alert before Low Suspend on Low Alert on Low
12:00
A - ______ __________ mg/dL , On , On , On
______ - ______ __________ mg/dL , On , On , On
______ - ______ __________ mg/dL , On , On , On
Low Snooze: ____________ minutes
Time Period High Limit Alert before High Alert on High Rise Alert
12:00
A - ______ __________ mg/dL , On ________ min , On
, On _____mg/dL/min
or | |
______ - ______ __________ mg/dL , On ________ min , On
, On _____mg/dL/min
or | |
______ - ______ __________ mg/dL , On ________ min , On
, On _____mg/dL/min
or | |
High Snooze: ____________ minutes
SENSOR SETTINGS: LOW SETTINGS Menu > Sensor Settings > Low Settings
SENSOR SETTINGS: HIGH SETTINGS Menu > Sensor Settings > High Settings
SETTINGS FORM FOR THE MINIMED
®
630G INSULIN PUMP
2
STARTUP WIZARD
Once you’ve inserted the battery, the Startup Wizard begins.
1. Select English.
2. Select a 12 Hour or a 24 Hour Time Format.
3. When Enter Time appears, press
or
to the correct hour and
press
.
4. Press
or
to the correct minutes and press
.
5. Press
or
to change the AM to PM if needed and press
.
6. Select Next.
7. When Enter Date appears, select Year. Press
or
to correct
year and press
. Repeat this to set Month and Day.
8. Select Next.
9. The rewinding screen will briefly appear. Select OK.
SETTING MAX BASAL
Press Menu, select Insulin Settings and Max Basal/Bolus.
1. Select Max Basal. A confirmation message appears.
Select Continue.
2. Select Max Basal. Use
and
to set the Max Basal amount
and press
.
3. Select Save.
SETTING MAX BOLUS
Press Menu, select Insulin Settings and Max Basal/Bolus.
1. Select Max Bolus. A confirmation message appears.
Select Continue.
2. Select Max Bolus. Use
and
to set the Max Bolus amount
and press
.
3. Select Save.
SETTING BASAL PATTERN
Press Menu, select Insulin Settings and Basal Pattern Setup.
1. Select Basal 1.
2. Select Options.
3. Select Edit.
4. Press
to enter End time. If you have only one basal rate,
leave the End time on 12:00
A and press .
If you have more than one basal rate, press
or
to change
the End time and press
.
5. Press
to enter U/h and press
.
6. Continue adding End times and basal rates as needed. Otherwise, select Done.
7. Review the basal rates. If entered incorrectly, press
to change. If Basal rates are correct, select Save.
Note: The settings shown are for illustration purposes only — your settings will likely be different.
STEPS TO PROGRAM YOUR REPLACEMENT MINIMED
®
630G INSULIN PUMP
3
TURN BOLUS WIZARD ON AND SETUP
Press Menu, select Insulin Settings and Bolus Wizard Setup.
1. Select Bolus Wizard to turn On.
2. Press
to see the rest of the message then select Next.
3. Review the description of Carb Ratio and select Next.
4. Press
to enter End time. Press
again to leave the End
time at 12:00
A. If you have more than one Carb Ratio, use
or
to change the End time and press .
5. Press
or
to enter your carb ratio and press .
Continue adding End times and Carb Ratios as needed.
6. Select Next when done.
7. Review the description of Insulin Sensitivity Factor and
select Next.
8. Press
to enter End time. Press again to leave the End
time at 12:00
A. If you have more than one Sensitivity Factor,
use
or
to change the End time and press
.
9. Press
or
to enter your sensitivity factor and press
.
Continue adding End times and Sensitivity Factors as needed.
10. Select Next when done.
11. Review the description of BG Target and select Next.
12. Press
to enter End time. Press again to leave the End
time at 12:00
A. If you have more than one BG Target, use
or
to change the End time and press
.
13. Press
or
to enter your Lo target and then press
.
14. Press
or
to enter your Hi target and then press
.
Continue adding End times and BG Targets as needed.
15. Select Next when done.
16. Review the description of Active Insulin Time and select Next.
17. Press
to enter Duration.
18. Press
or
to enter hr then press
.
19. Select Save.
The Bolus Wizard setup is now complete.
Note: The settings shown are for illustration purposes only — your settings will likely be different.
STEPS TO PROGRAM YOUR REPLACEMENT MINIMED
®
630G INSULIN PUMP
SETTING UP HIGH SETTINGS
Press Menu, select Sensor Settings and High Settings.
1. Select High Settings to turn On.
2. Press
to set End time. Press again to leave the End time at 12:00A. If setting more than
one time segment, press
to enter End time of first segment, and press
.
3. Press
or
to set Hi limit and press
. Press again to continue.
4. Select each alert you wish to turn on. If a feature is On, select it
again to turn it back off. When finished, select Next.
5. Enter the next End time and repeat steps to enter limit and
alerts, or if finished, select Done.
6. Verify that settings are correct and select Save.
7. If the snooze time needs to be changed, press
to Snooze and press
. Press
or
to enter the correct time
and press
.
Your High Settings are now entered.
SETTING UP LOW SETTINGS
Press Menu, select Sensor Settings and Low Settings.
1. Select Low Settings to turn On.
2. Press
to set End time. Press again to leave the End time at 12:00A. If setting more than
one time segment, press
to enter End time of first segment, and press
.
3. Press
or
to set Lo limit and press
. Press again to continue.
4. Select each alert and suspend feature you wish to turn On. If a
feature is on, select it again to turn it back off.
5. When finished, select Next. Enter the next End time and repeat
steps to enter limit and alerts, or if finished, select Done.
6. Verify that settings are correct and select Save.
7. If the snooze time needs to be changed, press
to Snooze and press
. Press
or
to enter the correct time
and press
.
Your Low Settings are now entered.
TURN SENSOR ON
Press Menu, select Sensor Settings.
1. Select Sensor to turn feature On.
You can now see the Sensor Settings menu options.
4
STEPS TO PROGRAM YOUR REPLACEMENT MINIMED
®
630G INSULIN PUMP
CONNECT DEVICE
Press Menu, select Utilities, Device Options, Connect Devices and Auto Connect.
1. Review Auto Connect message. Press
and select Continue.
2. Make sure the transmitter is fully charged and remove it from the charger.
3. Immediately select Search on the pump.
4. Confirm that the SN (serial number) on the pump screen matches
the SN on the transmitter.
5. If they match, select Confirm.
The Manage Devices screen will appear with the SN displayed. Your transmitter
and pump are now connected.
Online Learning Resources
Medtronic has a rich library of online training classes available through myLearning. There you can find classes on
advanced pump and continuous glucose monitoring features. To browse the class catalog for a full list of offerings,
login to myLearning at my.medtronicdiabetes.com/mylearning.
For more information on pump features and settings, reference the MiniMed
®
630G System User Guide.
SET CALIBRATION REMINDER
Press Menu, select Reminders and Calibration.
1. Select Reminder to turn the reminder On.
2. Select Time and enter a time between 5 minutes and 6 hours.
3. Select Save.
Please take some time to review ALL your entries and ensure they are correct.
950M16171-011 20161125 ©2016 Medtronic MiniMed, Inc. All rights reserved.
In Need of Technical Assistance?
Our 24-Hour HelpLine is here to help.
Call 1.800.646.4633
For medical advice, call your Healthcare Team.
5
STEPS TO PROGRAM YOUR REPLACEMENT MINIMED
®
630G INSULIN PUMP
-
1
-
2
-
3
-
4
-
5
-
6
Medtronic MINIMED 630G is an advanced insulin pump system designed to make diabetes management easier and more effective. With its user-friendly interface, customizable settings, and integrated continuous glucose monitoring (CGM), the 630G offers precise insulin delivery and real-time glucose readings for better blood sugar control.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Medtronic MINIMED 630G Owner's manual
-
-
Medtronic MiniMed Paradigm REAL-Time Revel User manual
-
-
Medtronic MINIMED 670G User manual
-
-
Medtronic MiniMed User guide
-
Medtronic 700 Series User guide
-
-
Medtronic MiniMed 780G User guide
Other documents
-
Energizer 515 User manual
-
MiniMed 640G User manual
-
-
CONTOUR NEXT Controur Next Link 2.4 User manual
-
CONTOUR NEXT LINK 2.4 User manual
-
CONTOUR NEXT LINK 2.4 meter Reference guide
-
Contour Next Link 2.4 User manual
-
Bayer HealthCare Contour next Link 2.4 User manual
-
Bayer HealthCare Contour next Link 2.4 User manual
-
HealthCare Omnipod User guide
