Teasi CORE Quick start guide

Powered by

Schnellstartanleitung Deutsch

Quick Start Guide English

Guide de démarrage rapide Français

Beknopte handleiding Nederlands

Stručná úvodní příručka Čeština

core

Connecting TEASI core with TAHUNA App

1

2 3

4

5 6

8 9

7

Navigation (turn instructions to TEASI CORE)

Page is loading ...

Powered by

Quick Start Guide

English

Thank you for choosing a product from TEASI. A very good choice!

We hope you´ll enjoy using your new recreational navigation system.

Just in case that you are facing any problems with your device, visit

http://support.teasi.de

On our website – www.teasi.eu – you’ll find detailed manuals,

updates and technical information.

Do you need additional accessories like charger, mount or a bag?

Ask your TEASI dealer or simply visit our online shop at

www.teasi.eu for orders and more information.

core

The use and operation of navigation systems

Attention! Don’t operate with the device while driving. Even the smallest

and shortest distractions from road or traffic for you and other road users -

even at slow speeds – may have devastating consequences.

Type in the destination before starting

your journey and start the navigation

system before you start driving

.

If you have to change the route or the settings while driving, you should

better stop for it.

Updates and Enhancements

You can download the detailed manual from our website:

www.teasi.eu

Teasi Core

TEASI Core is an intelligent bike computer which can be connected via

Bluetooth® with your smartphone (free TAHUNA App for Android and iOS)

or external fitness sensors and displays basic values as well as navigation

instructions, training data and incoming calls.

This product is provided with a built-in battery that can be charged with a

charger with DC 5V, 680 mA or a PC USB interface.

This product is provided with a monochrome display screen, its backlight

can be turned on manually at night for better vision, and turned off at day to

save power. You can also set backlight into auto on/off mode in the

settings menu.

1. Know your Core

1. USB charging interface/USB

rubber stopper

2. Long press: power on/off short press:

backlight on/off

3. Reset 4. Buzzer, Sound off in the menu only

refers to steering notification tone and

warning tone off, button tone cannot be

set off

5. Auto backlight on/off induction

window

6. Connected to heart rate bracket

A

B

C

1

3

5

4

2

6

A/B/C shown in the figure above are the functional buttons of this product,

please see the table below for their specific functions:

Buttons Normal mode Setting mode

Short press: change display mode

Long press 1 sec: go into settings

picture

Short press: change option,

backward/left direction

Long press 1 sec: exit the settings

picture

Long press 1 sec: change to App

working mode

Long press 2 sec: go into pair

sensor mode

Short press: Change digit/confirm

(Yes/No)

Short press: start/pause recording

Long press: stop recording

Short press: select next digit or

option/right direction

Buttons Pairing sensors mode Connect with APP mode

Long press 1 sec: exit pair sensor

picture

Short press: exit smartphone search

Short press: start search

sensors/search next

sensor/exit if both

sensors are connected

___

2. Connecting Teasi Core

Tap on the gear wheel at the bottom left side of the screen to open the

Settings menu.

The content of Settings menu appears. It has a submenu panel. Choose

Sensors by sliding the submenu panel.

Please make sure Teasi Core is switched on and searching for smart

phones. The App will do a scanning whether there is any BLE

*

device

nearby.

After the scans, it will show what it has found. Search for the sign ‘TEASI

CORE’ with a green icon. It is disconnected on default. Tap on it, so it can

start connecting.

*

BLE: Bluetooth Low Energy

If your Teasi Core cannot be found, use the Reset arrow to update the

status of the search.

3. Using Bluetooth Sensors

3.1 Speed/Cadence Sensor

a) There is a CR2032 button cell inside the product to provide power

and its service life is 4 months in general. Teasi Core or Tahuna will

fail to detect sensors when sensor cell is dead or sensor is

damaged. Sensor cell can be replaced according to the figure

below.

Please note: when you use this product for the first time, please

remove the battery hatch to remove the insulation film.

b) This prod

uct can be connected to any equipment conforming to

BLE 4.0 standard protocol and transmit data to it.

c) This product will get into sleep mode after wheels stop spinning for

5 min in order to save power; it will also get into sleep mode when

App or Teasi Core disconnects with sensor. When it is used again,

bike wheels shall be made spun to activate sensor, so that the

product can be searched by App or Teasi Core.

4. Teasi Core has 2 working modes:

a) Bike computer working mode:

Teasi Core is only a bike computer that is not connected to App in

this mode

, speed/cadence sensor and HR monitor shall pair with

Teasi Core and connect to it.

The data fields in the bike computer can be customized in the

Tahuna App. The customized data fields will also be used if the

App is not connected to the Teasi Core.

b) App working mode:

Teasi Core is only a display equipment that needs to pair and

connect to App, and all its data is from App push; in this mode,

speed/cadence sensor and heart rate monitor shall pair with App

and connect to it.

Please note: No matter which working mode is in, bike computer or

App mode, it is needed to set wheel size on bike computer or App;

otherwise, the data will no

t be accurate.

Language: Teasi Core supports 5 languages:

English, German,

French, Dutch and Czech

Sound: only steering notification tone and warning tone can be turn

off, button tone cannot be set off

Backlight: users can select auto backlight control in settings menu;

when auto backlight is selected, the backlight will be turned off

automatically at day and be turned on at night

Clear pair info: eliminate Bluetooth pairing information

Clear sport data: eliminate all sports data except for ODO data

Reset to default: ODO data will be cleared after resetting to de

fault

5. Installation on your bycicle

5.1 Installation of Teasi Core

Fix Teasi Core on HR bracket as shown in the figure below.

5.2 Installation of speed/cadence sensor

Install pedals magnet (RPM) and wheel magnet (Speed) in

corresponding positions as shown in the figure below:

Tear the 3M adhesive on the back of pedals magnet off and stick

pedals magnet inside the pedal connecting arm, and then tie up the 2

nylon straps to fix it, and cut unnecessary part down.

Install the wheel magnet on wheel spoke and tighten it, so as to

ensure that it will not slide when the wheel is spinning at a high

speed.

Fix speed/cadence sensor on corresponding position of bike as shown

in the figure, and then tighten it with 2 nylon straps.

Then, fix it again with a rubber band.

Please note: the centers of pedals magnet and wheel magnet shall be

aligned with corresponding induction part of sensor and shall not be

deviated from it too far; the magnets shall not be more than 2 cm from

the induction part, since distance larger than 2 cm will make it fail to

receive the wheel spinning signal. Screws can be loosened with

screwdriver to adjust the distance between the extendible arm of

inductor and

spoke magnet.

User information/Contact

If your device has a defect or you have problems with it, please contact our

Service & Support Centre.

If you need to send your device to us, please attend to the following points:

1. Whenever possible, use the original packaging.

2. Add a detailed error description

3. Add your full name and address and a copy of your purchase receipt.

4. Stamp and send the package to us (sufficient postage).

Address of our Service Center:

First Service Center, Kleine Düwelstr. 21, DE-30171 Hannover

You can get help at:

http://support.teasi.de

Declaration of Conformity

Hereby Baros GmbH, declares, that the device TEASI Core / NAV-BIKTC /

NAV-BIKTS, is in compliance with the essential requirements and other

relevant regulations of Directive 2014/53/EU.

The Declaration of Conformity can be found at: www.a-rival.de

Guarantee

Please keep the proof of purchase for this device for the entire duration of

the guarantee period, as it must be produced in the event of any claim.

You (as the end user) receive a 36 months guarantee from the date of

sale. The article ha

s been manufactured using the most modern

production methods and subjected to strict quality controls.

Please contact only the manufacturer (not the dealer where you purchased

it) in the event of any defects during the guarantee period.

http://support.teasi.de

The guarantee does not cover damage caused by improper use or external

influence (water, falling, sunlight, breakage or impact).

Page is loading ...

Teasi CORE Quick start guide

Related papers

Other documents