2. Thinklogical
  3. SDIXtreme 3G

Thinklogical SDIXtreme 3G Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the Thinklogical SDIXtreme 3G Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
5VDC (PWR-000051-R)
Fiber Optic Cable Fiber Optic Cable
KVM Matrix Switch
VX160
router
SDIXtreme
3G SDI Fiber Optic Extension
3G
HD, SD, 3G SDI Source
HD, SD, 3G SDI
Loop Through
HD, SD, 3G SDI
Destinations
To UPSTREAM
Receive Port
From
DOWNSTREAM
Transmit Port
SDIXtreme_3G_VX160_Quick_Start_Rev_A
Local Monitor
SDI
▼
▼
3G SDI Fiber Optic Extension
TRANSMITTER
SDIXtreme3G
OUT
IN
PWR
PWR LOCK
OUT
HD
▼
▼
OUT
PWR
OUT IN
3G SDI Fiber Optic Extension
RECEIVER
SDIXtreme3G
LOCK
HD
PWR
5VDC (PWR-000051-R)
Display Monitor
SDI
Source
Destination
STEP 2: Install the provided +5VDC power supply to the
SDIXtreme Receiver and plug it into a standard AC source.
Ensure that the PWR LED on the Receiver comes on.
2
3
3G
STEP 3: Install your HD,
SD or 3G SDI destination
devices to the Receiver’s
OUT Ports.
1
STEP 1: Connect your Fiber
Optic Cable from the Receiver
IN Port to a router transmit
port or directly to the
SDIXtreme Transmitter
OUT Port depending on your
application.
Multi-Mode fiber can be up to
1000 metes. Single-Mode
fiber may be up to 40
kilometers.
4
STEP 4: Connect your Fiber Optic Cable from the
Transmitter OUT Port to a router receive port or directly
to the SDIXtreme Receiver IN Port depending on
your application.
Multi-Mode fiber can be up to 1000 meters. Single-
Mode fiber may be up to 40 kilometers.
5
STEP 5: Install the provided
+5VDC power supply to the
SDIXtreme Transmitter
and plug it into a standard
AC source. Ensure that the
PWR LED on the
Transmitter comes on.
3G
6STEP 6: Install your HD, SD or 3G SDI
source device to the Transmitter’s IN Port. A
local Monitor or other viewing device may be
connected to the Transmitter’s OUT port.
7
STEP 7: Ensure that the LOCK LED on both the
Receiver and Transmitter Units are ON. This
indicates that all connections are sound.
7*
*
TR
SFP OUT (Transmitter)
SFP IN (Receiver)
TR
Multi-Mode VOP M19
Single-Mode VOP S30
Multi-Mode VOP M18
Single-Mode VOP S29
QUICK START GUIDE
PHONE: 1-800-291-3211
WEBSITE: www.thinklogical.com
EMAIL: [email protected] Visit us online at www.thinklogical.com for more product information, current updates and
the complete line of Thinklogical™ products.
Copyright © 2010. All rights reserved. Printed in the U.S.A. All trademarks and service marks are the property of their respective owners.
3G
3G
/