Scrail SCFP713FSEGSFP User manual

Brand
Scrail
Model
SCFP713FSEGSFP
Type
User manual

This manual is also suitable for

Scrail SCFP713FSEGSFP is a powerful and versatile multi-tool that combines the capabilities of a saw, sander, and grinder into one convenient device. With its variable speed motor and quick-change blade system, the Scrail SCFP713FSEGSFP can handle a wide range of tasks, from cutting wood and metal to sanding and grinding surfaces.

The Scrail SCFP713FSEGSFP is ideal for both DIY enthusiasts and professional contractors. Its compact size and lightweight design make it easy to maneuver, while its ergonomic handle provides a comfortable grip for extended use. The quick-change blade system allows you to switch between different blades quickly and easily, so you can get the job done right without wasting time.

Scrail SCFP713FSEGSFP is a powerful and versatile multi-tool that combines the capabilities of a saw, sander, and grinder into one convenient device. With its variable speed motor and quick-change blade system, the Scrail SCFP713FSEGSFP can handle a wide range of tasks, from cutting wood and metal to sanding and grinding surfaces.

The Scrail SCFP713FSEGSFP is ideal for both DIY enthusiasts and professional contractors. Its compact size and lightweight design make it easy to maneuver, while its ergonomic handle provides a comfortable grip for extended use. The quick-change blade system allows you to switch between different blades quickly and easily, so you can get the job done right without wasting time.

tradition.
quality.
vision.
SUBLOC
®
PRO FOR SQUEAKLESS SUBFLOORS!
SubLoc
®
PRO SCRAIL
®
• Aggressive double threads for squeak-less subfl oors
• Vastly improved holding power vs ring shank nails
• New head design to improve pull-through resistance
• Quickly driven with a pneumatic nailer
• Code approved (IAPMO report #406 and #344)
• Reduces the need for callbacks, saves cost for builders, and
increases customer satisfaction
• Approved fastening method to install AdvanTech
®
and Norbord
®
subfl oor panels
15°
33°
20°
0°
AdvanTech
®
and Norbord
®
are registered trademarks of their respective owner
CODE APPROVED
Material:
standard steel
Finish:
electro-galvanized with special adhesive coating
Diameter
inner .113"
outer .126"
inner 2.8 mm
outer 3.2 mm
Lengths:
2 1/4" 57 mm
Drive:
Square #2
Collation Type:
20° Plastic Strip + 33° Plastic Strip
15° Wire Coil, 0° Plastic Sheet Coil
Individual lengths and materials are available upon request!
SubLoc
®
PRO SCRAIL
®
Value Charts:
F58AC CN33-90B SCR
FASCO
Strip Nailer
,
suitable for current range of
33°
Plastic Strip
SCRAIL
®
including BeckDeck
®
and nails.
TECHNICAL DATA
Weight 8.65 lbs
Fastener Length 2" - 4"
Magazine Capacity 62
Pressure 70 - 120 psi
TECHNICAL DATA
Weight 7.61 lbs
Fastener Length 1 3/4" - 2 3/4"
Magazine Capacity 200 - 300
Pressure 70 - 120 psi
F58A CN15W-70 SLP
FASCO Coil Nailer, suitable for
15° SubLoc
®
PRO SCRAIL
®
and nails.
F58AC CN15W-80 SLP
FASCO Coil Nailer, suitable for
15° SubLoc
®
PRO SCRAIL
®
and nails
TECHNICAL DATA
Weight 8.48 lbs
Fastener Length 1" - 3 1/4"
Magazine Capacity 200 - 300
Pressure 70 - 120 psi
F58A RHN 20-90B SCR
FASCO Strip Nailer, featuring a patent pending
multi-magazine, suitable for current range of 20°
- 22° Plastic Strip SCRAIL
®
including BeckDeck
®
,
nails and concrete pins.
TECHNICAL DATA
Weight 8.80 lbs
Fastener Length 1" - 1 9/16" & 2" - 3"
Magazine Capacity 62
Pressure 70 - 120 psi
No smooth shank between the upper and lower threads prevents
board movement that can lead to squeaking and creaking.
The upper thread grabs into the deckboard and prevents micro
movement of the wood even in the event of wood shrinkage.
Patented DIAMOND COATING for vastly improved holding power
New head design to improve pull-through resistance
Ring Shank
Nails
Standard
SCRAIL
®
SubLoc
®
SCRAIL
®
SubLoc
®
PRO
SCRAIL
®
Ring Shank
Nails
SubLoc
®
PRO
SCRAIL
®
Version 05/17 US Changes and errors excepted. All rights reserved.
Raimund Beck GmbH
NTA Nail Tech Austria
Telefon +43 (0) 77 24 / 21 11-0 | Fax +43 (0) 77 24 / 21 11-20
sales@beck-austria.com | www.beck-fastener.com
VBT
FASCO America Inc. | 105 Industrial Park
PO Box 2389-Muscle Shoals, AL 35662
Phone +1-256-381-6364
Fax +1-256-381-6659 | Toll Free +1-800-239-8665
sales@fascoamerica.com | www.fascoamerica.com
Version 05/17 FASAM Changes and errors excepted. All rights reserved.
  • Page 1 1
  • Page 2 2

Scrail SCFP713FSEGSFP User manual

Brand
Scrail
Model
SCFP713FSEGSFP
Type
User manual
This manual is also suitable for

Scrail SCFP713FSEGSFP is a powerful and versatile multi-tool that combines the capabilities of a saw, sander, and grinder into one convenient device. With its variable speed motor and quick-change blade system, the Scrail SCFP713FSEGSFP can handle a wide range of tasks, from cutting wood and metal to sanding and grinding surfaces.

The Scrail SCFP713FSEGSFP is ideal for both DIY enthusiasts and professional contractors. Its compact size and lightweight design make it easy to maneuver, while its ergonomic handle provides a comfortable grip for extended use. The quick-change blade system allows you to switch between different blades quickly and easily, so you can get the job done right without wasting time.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents