2. Keeney
  3. 1815SN

Keeney 1815SN, 4815ASN Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Keeney 1815SN Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Slip joint connection:
(Discard extra nut and short tailpiece insert if included)
1. Turn off water at the tap.
2. Remove old end outlet tee and tailpiece.
3. Remove top nut A and washer B on new tee.
4. Place nut A and poly washer on sink tailpiece as illustrated.
5. Remove side nut C and washer D and place on waste drain tube.
6. Place nut and washer from J Bend onto tee.
7. Position tee. Hand-tighten nuts. Run water to test for leaks.
Direct connection:
1. Turn off water at the tap.
2. Remove old end outlet tee and tailpiece.
3. Remove top nut A and washer B.
4. Invert nut A and drop insert into it.
5. Attach strainer using rubber washer.
6. Put second nut E and poly washer F on insert.
7. Put side nut C and washer D on waste drain tube.
8. Place nut and washer from J Bend onto tee.
9. Position tee. Hand-tighten nuts. Run water to test for leaks.
4815ASN/1815SN
/