Wacker Neuson G150 User manual

Category
Power generators
Type
User manual

This manual is also suitable for

Operator’s Manual
Mobile Generator
G150
G180
Type G150, G180
Document 5200007004
Date 0119
Revision 10
Language
EN
5200007004
Copyright notice
© Copyright 2019 by Wacker Neuson Production Americas LLC
All rights, including copying and distribution rights, are reserved.
This publication may be photocopied by the original purchaser of the
machine. Any other type of reproduction is prohibited without express
written permission from Wacker Neuson Production Americas LLC.
Any type of reproduction or distribution not authorized by Wacker
Neuson Production Americas LLC represents an infringement of valid
copyrights. Violators will be prosecuted.
Trademarks
All trademarks referenced in this manual are the property of their
respective owners.
Manufacturer
Wacker Neuson Production Americas LLC
N92W15000 Anthony Avenue
Menomonee Falls, WI 53051 U.S.A.
Tel: (262) 255-0500 · Fax: (262) 255-0550 · Tel: (800) 770-0957
www.wackerneuson.com
Original instructions
This Operator’s Manual presents the original instructions. The original
language of this Operator’s Manual is American English.
wc_tx004643en.fm 3
CALIFORNIA Proposition 65 Warning
CALIFORNIA Proposition 65 Warning
WARNING
The engine exhaust from this product contains chemicals known to the State of
California to cause cancer, birth defects, or other reproductive harm.
WARNING
Diesel engine exhaust and some of its constituents are known to the State of
California to cause cancer, birth defects, and other reproductive harm.
WARNING
Cancer and Reproductive Harm -
www.P65Warnings.ca.gov.
WARNING
Batteries, battery posts, terminals and related accessories contain lead and lead
compounds, and other chemicals known to the State of California to cause cancer
and birth defects or other reproductive harm. WASH HANDS AFTER HANDLING.
CALIFORNIA Proposition 65 Warning Proposition 65 Warning
4 wc_tx004643en.fm
Notes
wc_tx003566gb_FM10.fm
5
Machine Identification
SAVE THESE INSTRUCTIONS—This manual contains important instructions for
the machine models below. These instructions have been written expressly by
Wacker Neuson Production Americas LLC and must be followed during installation,
operation, and maintenance of the machines.
Machine
identification
A nameplate listing the model number, item number, revision number, and serial
number is attached to this machine. The location of the nameplate is shown above.
Serial number
(S/N)
For future reference, record the serial number in the space provided below. You will
need the serial number when requesting parts or service for this machine.
Machine Item Number Machine Item Number
G150 5000620655, 5000620656,
5000620657, 5200001321,
5200003160, 5200006902,
5000620887, 5000620888,
5000620889, 5200007860,
5200010135, 5200010136,
5200010137, 5200014784,
5200025554, 5100014196,
5100015616, 5100025830,
5100045088, 5100045570,
5100045571
G180 5000620658, 5000620659,
5000620660, 5200001322,
5200003161, 5200006903,
5000620884, 5000620885,
5000620886, 5200007861,
5200014469, 5200014470,
5200014471, 5200010138,
5200010139, 5200010140,
5200025555, 5100015615,
5100025832, 5100025842,
5100045089, 5100045575,
5100045576, 5100045590,
5100045591, 5100045592
wc_gr010208
Serial Number:
Foreword Mobile Generator
6 wc_tx003565gb_FM10.fm
Foreword
Machine
documentation
â–  From this point forward in this documentation, Wacker Neuson Production
Americas LLC will be referred to as Wacker Neuson.
■ Keep a copy of the Operator’s Manual with the machine at all times.
â–  For spare parts information, please see your Wacker Neuson Dealer, or visit the
Wacker Neuson website at http://www.wackerneuson.com/.
â–  When ordering parts or requesting service information, be prepared to provide
the machine model number, item number, revision number, and serial number.
Expectations
for
information in
this manual
â–  This manual provides information and procedures to safely operate and
maintain the above Wacker Neuson model(s). For your own safety and to
reduce the risk of injury, carefully read, understand, and observe all instructions
described in this manual.
â–  Wacker Neuson expressly reserves the right to make technical modifications,
even without notice, which improve the performance or safety standards of its
machines.
â–  The information contained in this manual is based on machines manufactured
up until the time of publication. Wacker Neuson reserves the right to change any
portion of this information without notice.
â–  The illustrations, parts, and procedures in this manual refer to Wacker Neuson
factory-installed components. Your machine may vary depending on the
requirements of your specific region.
CALIFORNIA
Proposition
65 Warning
Combustion exhaust, some of its constituents, and certain vehicle components
contain or emit chemicals known to the State of California to cause cancer and
birth defects or other reproductive harm.
Laws
pertaining to
spark
arresters
NOTICE: State Health Safety Codes and Public Resources Codes specify that in
certain locations spark arresters be used on internal combustion engines that use
hydrocarbon fuels. A spark arrester is a device designed to prevent accidental
discharge of sparks or flames from the engine exhaust. Spark arresters are
qualified and rated by the United States Forest Service for this purpose. In order to
comply with local laws regarding spark arresters, consult the engine distributor or
the local Health and Safety Administrator.
Mobile Generator Foreword
wc_tx003565gb_FM10.fm 7
Manufacturer’s
approval
This manual contains references to approved parts, attachments, and
modifications. The following definitions apply:
â–  Approved parts or attachments are those either manufactured or provided by
Wacker Neuson.
â–  Approved modifications are those performed by an authorized Wacker
Neuson service center according to written instructions published by Wacker
Neuson.
â–  Unapproved parts, attachments, and modifications are those that do not
meet the approved criteria.
Unapproved parts, attachments, or modifications may have the following
consequences:
â–  Serious injury hazards to the operator and persons in the work area
â–  Permanent damage to the machine which will not be covered under warranty
Contact your Wacker Neuson dealer immediately if you have questions about
approved or unapproved parts, attachments, or modifications.
Abbreviations
Abbreviation or
Acronym
Definition
Abbreviation
or Acronym
Definition
ATS Automatic transfer switch L3 Level load logic
CARB California Air Resource
Board
LT Light truck
CDL Commercial driver’s license MAF Mass air flow
CKP Crank position NC Normally closed
CMP Camshaft position NHTSA National Highway Traffic Safety
Administration
CO Carbon monoxide NOx Nitrogen oxides
DEF Diesel exhaust fluid P/L Pressure limiter
DM Dosing module PPE Personal protective equipment
DOC Diesel oxidation catalyst S/N Serial number
DTC Diagnostic trouble codes SCR Selective catalytic reduction
EGR Exhaust gas recirculation SPN Suspect parameter number
EPA Environmental Protection
Agency
ST Special trailer
ERT Extended run tank TDG Canadian Transportation of
Dangerous Goods Act
FMI Failure mode identifier TWI Treadwear indicators
GAWR Gross axle weight ratings VCW Vehicle capacity weight
IBC Intermediate bulk container — —
Foreword Mobile Generator
8 wc_tx003565gb_FM10.fm
Notes
Table of Contents
G150 / G180
wc_bo5200007004_10TOC.fm
9
CALIFORNIA Proposition 65 Warning 3
Foreword 6
1 Safety Information 17
1.1 Signal Words Used in this Manual ..................................................... 17
1.2 Machine Description and Intended Use ............................................. 18
1.3 Safety Guidelines for Operating the Machine ..................................... 19
1.4 Service Safety .................................................................................... 21
1.5 Operator Safety while Using Internal Combustion Engines ............... 23
1.6 Safety Guidelines for Mobile Generators ........................................... 24
1.7 Safety Guidelines for Towing the Machine ......................................... 26
1.8 Safety Guidelines for Lifting the Machine ........................................... 27
1.9 Reporting Safety Defects ................................................................... 27
2 Label Locations 28
3 Label Meanings 30
4 Lifting and Transporting 41
4.1 Lifting the Machine ............................................................................. 41
4.2 Before Towing Checklist ..................................................................... 42
4.3 Towing the Machine ........................................................................... 43
4.4 Preparing the Machine for Transport on a Truck or Trailer ................ 44
4.5 Hazardous Materials Placards ........................................................... 45
4.6 Testing the Breakaway System—Hydraulic Surge Brakes ................. 46
4.7 Testing the Breakaway System—Electric Brakes .............................. 48
5 Machine Setup 50
5.1 Preparing the Machine for First Use ................................................... 50
5.2 Positioning the Machine ..................................................................... 51
5.3 Grounding the Generator ................................................................... 53
5.4 Recommended Fuel ........................................................................... 54
5.5 Refueling the Machine—Basler Controller ......................................... 55
5.6 Refueling the Machine—Deep Sea Controller ................................... 56
Table of Contents
G150 / G180
wc_bo5200007004_10TOC.fm
10
6 Operation, Control, and Component Locations 58
6.1 Control and Component Locations ......................................................58
7 Operation—Basler Controller 60
7.1 Main Circuit Breaker ............................................................................60
7.2 Engine Start Switch .............................................................................62
7.3 Generator Pre-Alarms and Alarms (Shut-Down Conditions) ...............63
7.4 Overcurrent Condition .........................................................................64
7.5 Function of the Crankcase Pressure Switch (if equipped) ..................65
7.6 Using the Lugs and the Convenience Receptacles .............................67
7.7 Selecting the Voltage ..........................................................................68
7.8 Before Starting the Machine ................................................................70
7.9 Starting and Running the Machine ......................................................71
7.10 Stopping the Machine ..........................................................................74
7.11 Emergency Stop Switch ......................................................................74
7.12 LCD Panel: Monitoring Machine Operation .........................................75
8 Working with Basler Controller 77
8.1 How to Use the Generator Controller LCD and Keypad ......................77
8.2 Menu Diagram of the Generator Controller .........................................78
8.3 Menu Diagram Components ...............................................................79
8.4 Using the Metering and Settings Menus .............................................80
8.5 Logging in to the Generator Controller by Entering the Password ......81
8.6 Adjusting the LCD Screen Contrast ....................................................84
8.7 Changing the Time/Date Settings .......................................................85
8.8 Changing the Sender Fail Time Delays ...............................................86
8.9 Changing the Units of Measure ...........................................................88
8.10 Changing the Low Fuel Pre-Alarm Setting ..........................................89
8.11 Changing or Disabling the Low Fuel Alarm Setting .............................91
8.12 Changing the Cooldown Time Setting .................................................93
8.13 Changing the Pre-Crank Time Delay (Glow Plug Timer) ....................95
8.14 Changing the Maintenance Interval .....................................................97
8.15 Resetting the Maintenance Interval Pre-Alarm ....................................99
8.16 Resetting a Loss of Voltage Pre-Alarm .............................................101
8.17 Accessing and Using the Event Log ..................................................102
Table of Contents
G150 / G180
wc_bo5200007004_10TOC.fm
11
9 Operation—Deep Sea Controller 104
9.1 Main Circuit Breaker ......................................................................... 104
9.2 Generator Controller Power Switch .................................................. 105
9.3 Function of the Crankcase Pressure Switch (if equipped) ............... 106
9.4 Selecting the Voltage ....................................................................... 108
9.5 Deep Sea Controller Buttons/Functions ........................................... 110
9.6 Generator Controller Alarms and Shut-Down Conditions ................. 112
9.7 Before Starting the Machine ............................................................. 114
9.8 Starting and Running the Generator ................................................ 115
9.9 Stopping the Generator .................................................................... 118
9.10 Emergency Stop Switch ................................................................... 119
9.11 Engine and Generator Monitoring .................................................... 120
10 Working with Deep Sea Controller: DSE 7310 MKII 121
10.1 Introduction ....................................................................................... 121
10.2 Navigating the Menus ....................................................................... 122
10.3 Adjusting Screen Contrast ................................................................ 124
10.4 How to Reset the Maintenance Timer .............................................. 125
11 How to Connect Loads—480V 126
11.1 Lug Terminal Connection Diagrams ................................................. 126
11.2 Best Practices for Balancing Loads .................................................. 127
11.3 Connecting 480V, 3-Phase and Single-Phase Loads ...................... 130
11.4 Connecting a 240V 3Ø Load and a 240V 1Ø Load .......................... 131
11.5 Connecting 240V and 120V Single-Phase Loads ............................ 132
11.6 Connecting a 208V 3Ø Load and Multiple 120V 1Ø Loads .............. 133
11.7 Connecting a 220–240V 3Ø Load and Multiple 127–133V
1Ø Loads .......................................................................................... 134
12 How to Connect Loads—600V 135
12.1 Lug Terminal Connection Diagrams ................................................. 135
12.2 Best Practices for Balancing Loads .................................................. 136
12.3 Connecting a 240V 3Ø Load and a 240V 1Ø Load .......................... 139
12.4 Connecting 240V and 120V Single-Phase Loads ............................ 140
12.5 Connecting a 208V 3Ø Load and Multiple 120V 1Ø Loads .............. 141
12.6 Connecting a 220–240V 3Ø Load and Multiple 127–133V
1Ø Loads .......................................................................................... 142
12.7 Connecting 480V, 3-Phase Loads .................................................... 143
12.8 Connecting 600V, 3-Phase Loads .................................................... 144
Table of Contents
G150 / G180
wc_bo5200007004_10TOC.fm
12
13 Using Remote Start Capabilities 145
13.1 Remote Run Terminal Block .............................................................145
13.2 Remote Transfer Switch ....................................................................146
13.3 Preparing for Automatic/Remote Start-Up—Deep Sea .....................147
14 Diagnostic Trouble Codes (DTC) 149
14.1 Accessing DTCs with the Basler Controller .......................................149
14.2 Accessing Engine DTCs using the Deep Sea Controller ..................150
14.3 List of Engine Diagnostic Trouble Codes (DTCs) ..............................151
15 Factory-Installed Options 164
15.1 Battery Charger .................................................................................164
15.2 Lockable Battery Disconnect .............................................................165
15.3 Camlocks ...........................................................................................166
15.4 Containment System .........................................................................167
15.5 Extended Run Tank (ERT) ................................................................167
15.6 Engine Block Heater ..........................................................................168
15.7 Cold-Weather Thermostat .................................................................169
15.8 Low Coolant Shutdown .....................................................................170
15.9 Temperature-Activated Shutters .......................................................171
15.10 Positive Air Shutoff Valve ..................................................................172
15.11 Connecting an External Fuel Supply .................................................173
15.12 Lube Level Maintainer .......................................................................174
16 Machines with Aftertreatment Exhaust System 175
16.1 How the Aftertreatment Exhaust System Works ...............................175
16.2 Filling the DEF Tank ..........................................................................176
16.3 Shelf Life of Diesel Exhaust Fluid (DEF) ...........................................178
16.4 Monitoring and Control of the DEF Level ..........................................179
16.5 Monitoring DEF Quality .....................................................................180
16.6 Conditioning the Aftertreatment Exhaust System (if equipped) .........181
17 General Maintenance 182
17.1 Periodic Maintenance Schedule ........................................................182
17.2 Maintaining the Emission Control System .........................................183
17.3 Preparing for Maintenance ................................................................183
17.4 Cleaning the Machine ........................................................................183
Table of Contents
G150 / G180
wc_bo5200007004_10TOC.fm
13
17.5 Inspecting the Machine .................................................................... 184
17.6 Maintaining the Trailer ...................................................................... 185
17.7 Checking and Draining the Containment System (if equipped) ........ 186
17.8 Checking the Exhaust System ......................................................... 187
17.9 Maintaining the Battery ..................................................................... 188
17.10 Filling the Radiator ........................................................................... 189
17.11 Replacing the Aftertreatment DEF Dosing Unit Filter (if equipped) .. 191
17.12 Storage ............................................................................................. 193
17.13 Machine Disposal and Decommissioning ......................................... 194
18 Engine Maintenance: John Deere 4045TF285/HF285 6068HF285 195
18.1 Heavy Duty Diesel Engine Coolant .................................................. 199
19 Engine Maintenance: T4i Cummins QSB6.7 201
19.1 Coolant Recommendations and Specifications ................................ 204
20 Engine Maintenance: T4F Cummins QSB7-G9 205
21 Troubleshooting 209
22 Technical Data 210
22.1 Tier 4f Engines ................................................................................. 210
22.2 Engine Tier 4i ................................................................................... 211
22.3 Engine Tier 3 .................................................................................... 212
22.4 Generator, 480V ............................................................................... 213
22.5 Generator, 600V ............................................................................... 214
22.6 Trailer and Skid ................................................................................ 214
22.7 Dimensions ....................................................................................... 215
23 Tire Safety Information 216
24 User’s Information for Transport Canada Fuel Tank 228
Table of Contents
G150 / G180
wc_bo5200007004_10TOC.fm
14
25 Emission Control Systems Information and Warranty—Diesel 231
25.1 Emission Control System Background Information ...........................231
25.2 Limited Defect Warranty for Exhaust Emission Control System .......232
25.3 Limited Defect Warranty for Wacker Neuson Emission Control
Systems .............................................................................................232
26 General Machine Schematics 235
26.1 Fuses .................................................................................................235
26.2 Trailer Wiring .....................................................................................236
26.3 Trailer Wiring Components ................................................................237
27 Schematics—Machines with Basler Controller 238
27.1 AC Schematic: G150 / G180 .............................................................238
27.2 AC Schematic Components: G150 / G180 ........................................239
27.3 DC Schematic: G150 / G180 Tier 3 ...................................................240
27.4 DC Schematic Components: G150 / G180 Tier 3 .............................241
27.5 DC Schematic: G150 / G180 Tier 4i ..................................................242
27.6 DC Schematic Components: G150 / G180 Tier 4i ............................243
27.7 DC Schematic: G150 / G180 Cummins Tier 4f .................................244
27.8 DC Schematic Components: G150 / G180 Cummins Tier 4f ............245
27.9 Electrical Schematic Section A ..........................................................246
27.10 Electrical Schematic Components .....................................................247
27.11 Electrical Schematic Section B ..........................................................248
27.12 Electrical Schematic Components .....................................................249
27.13 Electrical Schematic Section C .........................................................250
27.14 Electrical Schematic Components .....................................................251
27.15 Cummins Engine Relays and Fuses .................................................252
27.16 Cummins Engine Relays and Fuses .................................................253
27.17 AC Schematic: G180, John Deere, 600V, Basler ..............................254
27.18 AC Schematic Components: G180, John Deere, 600V, Basler ........255
28 Schematics—Machines with Deep Sea Controller 256
28.1 AC Schematic: G150 / G180 .............................................................256
28.2 AC Schematic Components: G150 / G180 ........................................257
28.3 AC Schematic: G150 / G180, 600V ...................................................258
28.4 AC Schematic Components: G150 / G180, 600V .............................259
28.5 DC Schematic: G150 / G180 John Deere Tier 3 ...............................260
28.6 DC Schematic Components: G150 / G180 John Deere Tier 3 ..........261
Table of Contents
G150 / G180
wc_bo5200007004_10TOC.fm
15
28.7 DC Schematic: G150 / G180 Cummins T4i ...................................... 262
28.8 DC Schematic Components: G150 / G180 Cummins T4i ................ 263
28.9 DC Schematic: G150 / G180 Cummins Tf4 ..................................... 264
28.10 DC Schematic Components: G150 / G180 Cummins T4f ................ 265
28.11 DC Electrical Schematic Section A: G150 / G180 Cummins T4f ...... 266
28.12 Electrical Schematic Components .................................................... 267
28.13 DC Electrical Schematic Section B: G150 / G180 Cummins T4f ...... 268
28.14 Electrical Schematic Components .................................................... 269
28.15 DC Electrical Schematic Section C: G150 / G180 Cummins T4f ..... 270
28.16 Electrical Schematic Components .................................................... 271
28.17 Cummins Engine Relays and Fuses ................................................ 272
28.18 Cummins Engine Relays and Fuses ................................................ 273
Table of Contents
G150 / G180
wc_bo5200007004_10TOC.fm
16
wc_tx003567gb_FM10.fm
17
Mobile Generator Safety Information
1 Safety Information
1.1 Signal Words Used in this Manual
This manual contains DANGER, WARNING, CAUTION, NOTICE, and NOTE
signal words which must be followed to reduce the possibility of personal injury,
damage to the equipment, or improper service.
NOTICE: Used without the safety alert symbol, NOTICE indicates a situation
which, if not avoided, could result in property damage.
Note: A Note contains additional information important to a procedure.
This is the safety alert symbol. It is used to alert you to potential personal hazards.
â–º Obey all safety messages that follow this symbol.
DANGER
DANGER indicates a hazardous situation which, if not avoided, will result in death
or serious injury.
â–º To avoid death or serious injury from this type of hazard, obey all safety
messages that follow this signal word.
WARNING
WARNING indicates a hazardous situation which, if not avoided, could result in
death or serious injury.
â–º To avoid possible death or serious injury from this type of hazard, obey all safety
messages that follow this signal word.
CAUTION
CAUTION indicates a hazardous situation which, if not avoided, could result in
minor or moderate injury.
â–º To avoid possible minor or moderate injury from this type of hazard, obey all
safety messages that follow this signal word.
wc_tx003567gb_FM10.fm
18
Safety Information Mobile Generator
1.2 Machine Description and Intended Use
Machine
description
This machine is a mobile electric power source. The Wacker Neuson Mobile
Generator consists of a trailer-mounted cabinet containing an electric alternator, a
fuel tank, and a diesel engine. A control panel, receptacles, and connection lugs
are provided on the side of the cabinet. As the engine runs, the generator converts
mechanical energy into electric power. The operator connects loads to the electric
power receptacles and connection lugs.
Intended use
This machine is intended for the purpose of supplying electrical power to
connected loads. Refer to the product specifications for the output voltage and
frequency of this generator, and for the maximum output power limit of this
generator.
This machine has been designed and built strictly for the intended use described
above. Using the machine for any other purpose could permanently damage the
machine or seriously injure the operator or other persons in the area. Machine
damage caused by misuse is not covered under warranty.
The following are some examples of misuse:
â–  Connecting a load that has voltage and frequency requirements that are
incompatible with the generator output
â–  Overloading the generator with a load that draws excessive power during either
continuous running or start-up
â–  Operating the generator in a manner that is inconsistent with all federal, state
and local codes and regulations
â–  Using the machine as a ladder, support, or work surface
â–  Using the machine to carry or transport passengers or equipment
â–  Using the machine to tow other machines
â–  Operating the machine outside of factory specifications
â–  Operating the machine in a manner inconsistent with all warnings found on the
machine and in the Operator’s Manual
This machine has been designed and built in accordance with the latest global
safety standards. It has been carefully engineered to eliminate hazards as far as
practicable and to increase operator safety through protective guards and labeling.
However, some risks may remain even after protective measures have been taken.
They are called residual risks. On this machine, they may include exposure to:
â–  Heat, noise, exhaust, and carbon monoxide from the engine
â–  Fire hazards from improper refueling techniques
â–  Fuel and its fumes
â–  Electric shock and arc flash
â–  Personal injury from improper lifting the trailer tongue
â–  Typical hazards related to towing a trailer on roads and highways
To protect yourself and others, make sure you thoroughly read and understand the
safety information presented in this manual before operating the machine.
wc_tx003567gb_FM10.fm
19
Mobile Generator Safety Information
1.3 Safety Guidelines for Operating the Machine
Operator
training
Before operating the machine:
â–  Read and understand the operating instructions contained in all manuals
delivered with the machine.
â–  Familiarize yourself with the location and proper use of all controls and safety
devices.
â–  Contact Wacker Neuson for additional training if necessary.
When operating this machine:
â–  Do not allow improperly trained people to operate the machine. People
operating the machine must be familiar with the potential risks and hazards
associated with it.
Operator
qualifications
Only trained personnel are permitted to start, operate, and shut down the machine.
They also must meet the following qualifications:
â–  Have received instruction on how to properly use the machine
â–  Are familiar with required safety devices
The machine must not be accessed or operated by:
â– Children
â–  People impaired by alcohol, drugs, or prescription drugs
Application
area
Be aware of the application area.
â–  Keep unauthorized personnel, children, and pets away from the machine.
â–  Remain aware of changing positions and the movement of other equipment and
personnel in the application area/job site.
â–  Identify whether special hazards exist in the application area, such as toxic
gases or unstable ground conditions, and take appropriate action to eliminate
the special hazards before using the machine.
â–  Do not operate the machine in areas that contain flammable objects, fuels, or
products that produce flammable vapors.
Safety
devices,
controls, and
attachments
Only operate the machine when:
â–  All safety devices and guards are in place and in working order.
â–  All controls operate correctly.
■ The machine is set up correctly according to the instructions in the Operator’s
Manual.
â–  The machine is clean.
■ The machine’s labels are legible.
To ensure safe operation of the machine:
â–  Do not operate the machine if any safety devices or guards are missing or
inoperative.
â–  Do not modify or defeat the safety devices.
â–  Only use accessories or attachments that are approved by Wacker Neuson.
wc_tx003567gb_FM10.fm
20
Safety Information Mobile Generator
Safe
operating
practices
When operating this machine:
■ Remain aware of the machine’s moving parts. Keep hands, feet, and loose
clothing away from the machine’s moving parts.
â–  Do not operate a machine in need of repair.
â–  Do not consume the operating fluids used in this machine. Depending on your
machine model, these operating fluids may include water, wetting agents, fuel
(gasoline, diesel, kerosene, propane, or natural gas), oil, coolant, hydraulic oil,
heat transfer fluid (propylene glycol with additives), battery acid, or grease.
Personal
Protective
Equipment
(PPE)
Wear the following personal protective equipment (PPE) while operating this
machine:
â–  Close-fitting work clothes that do not hinder movement
â–  Safety glasses with side shields
â–  Hearing protection
â–  Safety-toed footwear
After use
â–  Stop the engine when the machine is not being operated.
â–  Close the fuel valve on engines equipped with one when the machine is not
being operated.
â–  Ensure that the machine will not tip over, roll, slide, or fall when not being
operated.
â–  Store the machine properly when it is not being used. The machine should be
stored in a clean location out of the reach of children.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206
  • Page 207 207
  • Page 208 208
  • Page 209 209
  • Page 210 210
  • Page 211 211
  • Page 212 212
  • Page 213 213
  • Page 214 214
  • Page 215 215
  • Page 216 216
  • Page 217 217
  • Page 218 218
  • Page 219 219
  • Page 220 220
  • Page 221 221
  • Page 222 222
  • Page 223 223
  • Page 224 224
  • Page 225 225
  • Page 226 226
  • Page 227 227
  • Page 228 228
  • Page 229 229
  • Page 230 230
  • Page 231 231
  • Page 232 232
  • Page 233 233
  • Page 234 234
  • Page 235 235
  • Page 236 236
  • Page 237 237
  • Page 238 238
  • Page 239 239
  • Page 240 240
  • Page 241 241
  • Page 242 242
  • Page 243 243
  • Page 244 244
  • Page 245 245
  • Page 246 246
  • Page 247 247
  • Page 248 248
  • Page 249 249
  • Page 250 250
  • Page 251 251
  • Page 252 252
  • Page 253 253
  • Page 254 254
  • Page 255 255
  • Page 256 256
  • Page 257 257
  • Page 258 258
  • Page 259 259
  • Page 260 260
  • Page 261 261
  • Page 262 262
  • Page 263 263
  • Page 264 264
  • Page 265 265
  • Page 266 266
  • Page 267 267
  • Page 268 268
  • Page 269 269
  • Page 270 270
  • Page 271 271
  • Page 272 272
  • Page 273 273
  • Page 274 274
  • Page 275 275
  • Page 276 276

Wacker Neuson G150 User manual

Category
Power generators
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI