2. Outdoor Distinctions
  3. MB-RFLEX6V1

Outdoor Distinctions MB-RFLEX6V1 User guide

  • Hello! I am an AI chatbot trained to assist you with the Outdoor Distinctions MB-RFLEX6V1 User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
ODRF_08_16
Installaon Instrucons
English
1
Tape measure
Power Screwdriver and Phillips Bit
Pencil
Tools Required
Item Quanty Descripon
A. 1 ReFlex-rotang metal bracket
B. 1 Wood Plaorm
C. 4 ReFlex Aachement Screws 2.5”
D. 1 #2 Square Bit
E. 4 Mailbox - Side Aachment Screws 1.25”
F. 4 Mailbox - Side Aachment Screws 2.25”
G. 4 Mailbox - Spacers (Oponal)
H. 4 Mailbox - Internal Aachment Screws .75”
Parts Included with this Product
Congratulaons on your purchase of the ReFlex-rotang mailbox bracket.
Before you begin, please refer to the parts list to ensure all materials needed for assembly have been received.
Quesons? Contact your local Outdoor Disncons Dealer or visit www.outdoordisncons.com
Outdoor Disncons representaves are available M-F 8:00 a.m. to 5:00 p.m. EST. at 844.345.2424.
B.
A.
E.
G.
F. C.
Read each step thoroughly prior to installing:
Determine mounng opon
1. Horizontal Mount
2. Post Mount
1. Horizontal Mount
Step 1 - Conrm required
gap between back of mailbox and
vercal post for rotaon. See
minimum gap reference.
Step 2 - Secure ReFlex using Part C
quanty 4 screws with Part D #2
Square screwdriver bit and Power
Screwdriver.
Step 3 - Posion round cutout on
Part B over fulcrum on Part A.
Step 4 - Mailbox Aachment
Side Mount Mailbox (Preferred Method)
Standard 6” T1 Mailbox: Posion
mailbox side mounng holes
with oblong openings on Part
A. Secure mailbox using Part E
quanty 4 screws into Part B.
Oversized 8”+ T2/T3 Mailbox: Posion mailbox side
mounng holes with oblong openings on Part A. Using Part
G quanty 4 spacers between Part A and mailbox boom
side lip, secure mailbox using Part F quanty 4 screws into
Part B. *Spacer gap will vary depending on mailbox width.
Internal Mount Mailbox
- Secure Part B to Part A through oblong opening and into
wood using Part E quanty 4 screws. Center mailbox over
mailbox plaorm and aach with Part H quanty 4 Pan-
head screws.
2. Post Mount
Step 1 - Center 4x4 Mounng Base Plate over wooden
post, aligning corners.
Go To Step 2 above to complete installaon as the
process is the same.
2.
1.
6” T1 Mailbox = 1” Minimum
8” T2 Mailbox = 1.5” Minimum
Step 2
Step 3
Step 1
2.
H.
D.
/