Vivo STAND-TV00Y Assembly Instructions

Vivo
Brand
Vivo
Model
STAND-TV00Y
Category
Flat panel floor stands
Type
Assembly Instructions

Vivo STAND-TV00Y is a tabletop TV stand designed to securely hold your TV and prevent it from tipping over. It features a sturdy base plate with non-slip pads for stability, and its adjustable height and swivel capabilities allow for optimal viewing angles. The stand supports TVs up to 110lbs in weight and comes with all the necessary hardware for easy assembly. Whether you're setting up your TV in the living room, bedroom, or office, the Vivo STAND-TV00Y provides a reliable and stylish solution.

Vivo STAND-TV00Y is a tabletop TV stand designed to securely hold your TV and prevent it from tipping over. It features a sturdy base plate with non-slip pads for stability, and its adjustable height and swivel capabilities allow for optimal viewing angles. The stand supports TVs up to 110lbs in weight and comes with all the necessary hardware for easy assembly. Whether you're setting up your TV in the living room, bedroom, or office, the Vivo STAND-TV00Y provides a reliable and stylish solution.

Tabletop TV Stand
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-tv00y
SKU: STAND-TV00Y
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
2
PACKAGE CONTENTS
WARNING!
M (x4)
M8 Washer
N (x4)
M4x12
L (x4)
M6 Washer
H (x4)
M4 Spacer
I (x4)
5mm M6/8
Spacer
J (x4)
20mm M6/
M8 Spacer
K (x4)
M4 Washer
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
A4 (x1)
TV Bracket
O (x4)
M4x30
A3 (x1)
TV Bracket
A1 (x1)
Base Plate
B1 (x1)
Base Plate
P (x4)
M6x20
Q (x4)
M6x35
R (x4)
M8x20
F (x1)
Allen Wrench
E (x4)
M6 Nut
D (x4)
M6 Cap Nut
C (x8)
M6x10
B2 (x1)
Junction Plate
A2 (x1)
Junction Plate
B4 (x1)
TV Bracket
B3 (x1)
TV Bracket
S (x4)
M8x35
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF TV OR TV STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
G (x1)
Crescent
Wrench
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
T (x4)
M8x45
U (x2)
So Pad
3
ASSEMBLY STEPS
STEP 1
Apply pads (l) to bottom of base plates (A1,
B1). Connect base plate (A1) to junction
plate (A2) using M6x10 Bolts (C) as shown
in diagram. Use Allen wrench (F) to tighten
bolts. Repeat this process with base plate (B1)
and junction plate (B2).
TOOLS NEEDED
110lbs
(49.90kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
Phillips
Screwdriver
STEP 3
Connect TV bracket (A3) to junction plate (A2)
using bolt (C), nut (D), and Allen wrench (F)
and crescent wrench (G) as shown in diagram.
Repeat process with TV bracket (B3) and
junction plate .
STEP 2
Attach TV bracket (A4) to TV bracket (A3) using
M6 nut (E) and tighten using the crescent
wrench (G). Repeat process with TV brackets
(B3, B4).
STEP 4
With TV facing down on a clean, flat surface,
mount legs to back of monitor using bolts
(N-T) and washers (K-M) depending on size
of mounting holes in television. For curved
monitors, spacers (H-J) may be required.
Soft Pad
A1 & B1
C
F
A2
A1
B2
B1
E
G
B3
B4
A3
A4
D
C
G
F
B3
A3
H , I, G
(if necessary)
N to S
K to M
LAST UPDATED: 03/06/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected]
AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Vivo STAND-TV00Y Assembly Instructions

Vivo
Brand
Vivo
Model
STAND-TV00Y
Category
Flat panel floor stands
Type
Assembly Instructions

Vivo STAND-TV00Y is a tabletop TV stand designed to securely hold your TV and prevent it from tipping over. It features a sturdy base plate with non-slip pads for stability, and its adjustable height and swivel capabilities allow for optimal viewing angles. The stand supports TVs up to 110lbs in weight and comes with all the necessary hardware for easy assembly. Whether you're setting up your TV in the living room, bedroom, or office, the Vivo STAND-TV00Y provides a reliable and stylish solution.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers