Silver Mobile TV Cart
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-tv02d
SKU: STAND-TV02D
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
2
PACKAGE CONTENTS
WARNING!
A (x1)
Glass Shelf
B (x1)
Support Arm
C (x1)
Support Arm
I (x1)
Plastic Sleeve
J x1)
Plastic Cover
K (x1)
Inner
Column
L (x1)
Outer
Column
H (x1)
Foot Pad
D (x1)
TV Plate
E (x1)
VESA
Bracket
F (x1)
VESA
Bracket
G (x5)
Cable Cover
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
N (x1)
Knob
M (x1)
Base
O x2)
Caster
M-F (x4)
Square Washer
M-G (x8)
Small Spacer
M-E (x4)
M8x50
M-A (x4)
M5x14
M-B (x4)
M6x14
M-D (x4)
M8x30
M-H (x8)
Big Spacer
M-C (x4)
M6x30
P-A (x8)
M6x10
P-B (x4)
M6x30
P-C (x4)
M6x16
P-D (x2)
M6x8
P-F (x8)
D6 Washer
P-G (x4)
D6 Washer
P-H (x4)
D8 Plastic Washer
P-I (x1)
Allen Wrench
P x2)
Locking Caster
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF TV OR TV CART.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
P-E (x2)
M6x6
3
ASSEMBLY STEPS
STEP 1
Install casters (O) and locking casters (P) to base (M) by screwing into mounts. Adjust casters to sit
level when placed on the floor, then secure by tightening nuts against base with a wrench (P-I).
88lbs
(40 kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
11 lbs
(5 kg)
TV DVD SHELF
TOOLS NEEDED
P
O
M
P
O
Phillips
Screwdriver
Wrench
Level
STEP 2
Attach the outer column (L) and foot pad (H)
to the base (M) using M6x30 bolts (P-B) and
D8 washers (P-H, P-G), ensuring the plastic
washers are installed between the metal
washers and glass base. Tighten bolts with
Allen wrench (P-I).
H
L
P-B
P-G
P-H
P-I
4
STEP 4
Insert inner column (K) into the outer column (L). Thread the knob (N) into the column to secure.
Attach plastic cover (J) to the outer column using M6x10 bolts (P-A) and tighten with Allen wrench
(P-I).
STEP 3
Slide the support arms (B,C) into column rails to desired height. Make sure both support arms are at
the same level and tighten all screws with Allen wrench (P-I).
XX
√
1
2
3
C
B
N
P- A
K
J
5
STEP 5
Insert plastic sleeve (I) into opening in TV plate (D). Place TV plate onto column, making sure the column
is inserted through the plastic sleeve, and secure with M6x16 bolts (P-C) using Allen wrench (P-I).
D
I
P-C
STEP 6
Attach glass shelf (A) to the installed support arms using M6x8 bolts (P-D), M6x6 bolts (P-E) and D6
washers (P-F). M6x8 bolts fit into front holes, and M6x6 bolts fit into rear holes. Tighten bolts with a
Phillips screwdriver.
P-E
P-F
A
P-D
6
STEP 8A
OPTION B: Large or Curved Back TV
Attach VESA brackets (E, F) to back of TV using screws (M-C, M-D or M-E) and square washers (M-F) with
spacers (M-G, M-H). For TV with 200mm VESA pattern, secure brackets with holes facing inward. For TV
with 300mm or larger pattern, secure brackets with holes facing out.
Hook TV with VESA brackets onto TV plate. Secure using four M6x10 bolts (P-A) with D6
washers (P-F) using Allen wrench (P-I).
STEP 7
OPTION A: Flat Back TV
Attach VESA brackets (E, F) to back of TV using screws (M-A or M-B) and square washers (M-F). For
TV with 200mm VESA pattern, secure brackets with holes facing inward. For TV with 300mm or larger
pattern, secure brackets with holes facing out.
M- B
M- F
M- A
M- F
M- G
M- F
M- C
M- D
M- C
M- D
M- F
M- H
M- F
M- C
M- D
M- H
M- G
M- F
M- E
M- H
M- F
M- H
M- E
M- G
M- E
M- F
M- H
M- G
P-F
P-A
7
90°
STEP 8B
To rotate TV to portrait view, remove 2 screws from the back of the TV plate as shown. Rotate the TV,
then secure using previously removed screws.
G
STEP 9
Route the cables along the back of the column. Attach the cable covers (G) to the column to hold the
cables in place.
LAST UPDATED: 03/06/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303
/
