Planet SGS-6310-16S8C4XR Quick start guide

Category
Network switches
Type
Quick start guide

This manual is also suitable for

Planet SGS-6310-16S8C4XR is a Layer 3 Gigabit/10 Gigabit Stackable Managed Switch with 16 100/1000X SFP ports, 8 Gigabit TP/SFP ports, and 4 10G SFP+ ports. It is designed for high-performance and reliable network connectivity in enterprise, data center, and campus environments. The switch offers advanced features such as Layer 3 routing, IPv6 support, Quality of Service (QoS), and security features to meet the demands of modern networks.

Planet SGS-6310-16S8C4XR is a Layer 3 Gigabit/10 Gigabit Stackable Managed Switch with 16 100/1000X SFP ports, 8 Gigabit TP/SFP ports, and 4 10G SFP+ ports. It is designed for high-performance and reliable network connectivity in enterprise, data center, and campus environments. The switch offers advanced features such as Layer 3 routing, IPv6 support, Quality of Service (QoS), and security features to meet the demands of modern networks.

Layer 3 Gigabit/10 Gigabit Stackable Managed Switch
SGS-6310 Series
Quick Installation Guide
Table of Contents
1. Package Contents ................................................................................. 3
2. Switch Management ............................................................................. 4
3. Requirements ....................................................................................... 5
4. Terminal Setup ..................................................................................... 6
4.1 Logging on to the Console .............................................................. 7
4.2 ConguringIPAddress ................................................................... 8
4.3 Setting1000BASE-Xfor10GSFP+Port ......................................... 10
4.4 ChangingPassword ...................................................................... 10
4.5 SavingtheConguration .............................................................. 11
5. Starting Web Management .................................................................. 12
5.1 LoggingintotheManagedSwitchfromCopperPorts ..................... 13
5.2 SavingCongurationviatheWeb .................................................. 14
6. LEDIndicators ................................................................................... 15
6.1 SGS-6310-24T4X ......................................................................... 15
6.2 SGS-6310-24P4X ......................................................................... 15
6.3 SGS-6310-16S8C4XR ................................................................... 16
6.4 SGS-6310-48T6X ......................................................................... 17
6.5 SGS-6310-48P6XR ....................................................................... 18
7. Customer Support .............................................................................. 20
3
1. Package Contents
Thank you for purchasing Layer 3 Gigabit/10 Gigabit Stackable Managed
Switch, SGS-6310-16S8C4XR/SGS-6310-24T4X/SGS-6310-24P4X/SGS-6310-
48T6X/SGS-6310-48P6XR.
Unless specied, “Managed Switch” mentioned in this Quick Installation
Guide refers to the SGS-6310-16S8C4XR/SGS-6310-24T4X/SGS-6310-24P4X/
SGS-6310-48T6X/SGS-6310-48P6XR.
Model Description
SGS-6310-16S8C4XR
L316-Port100/1000XSFP+8-PortGigabitTP/SFP
+4-Port10GSFP+StackableManagedSwitch(Dual
100~240VAC)
SGS-6310-24T4X L324-Port10/100/1000T+4-Port10GSFP+
StackableManagedSwitch
SGS-6310-24P4X. L324-Port10/100/1000T802.3atPoE+4-Port10G
SFP+StackableManagedSwitch
SGS-6310-48T6X L348-Port10/100/1000T+6-Port10GSFP+
StackableManagedSwitch
SGS-6310-48P6XR
L348-Port10/100/1000T802.3atPoE+6-Port
10GSFP+StackableManagedSwitchwith55VDC
RedundantPower
OpentheboxoftheManaged Switchandcarefullyunpackit.Theboxshould
containthefollowingitems:
SGS-6310
-16S8C4XR
SGS-6310
-24T4X
SGS-6310
-24P4X.
SGS-6310
-48T6X
SGS-6310
-48P6XR
QuickInstallation
Guide  
DB9toRJ45
InterfaceRS232
Console Cable
 
Rack-mount
AccessoryKit  
ACPowerCord 2 2121
SFPDustCap 28 4466
If any item is found missing or damaged, please contact your local reseller for
replacement.
4
2. Switch Management
TosetuptheManagedSwitch,theuserneedstoconguretheManaged Switch
for network management. The Managed Switch provides two management
options:Out-of-Band Management and In-Band Management.
Out-of-Band Management
Out-of-band management is the management through console interface.
Generally, the user will use out-of-band management for the initial
switch conguration,orwhenin-bandmanagementisnotavailable.
In-Band Management
In-band management refers to the management by logging in to the Managed
SwitchusingTelnetorHTTP,orusingSNMPmanagementsoftwareto congure
the Managed Switch. In-band management enables the management of
the Managed Switch to attach some devices to the Switch. The following
proceduresarerequiredtoenablein-bandmanagement:
1. Log on to console
2.Assign/CongureIPaddress
3. Create a remote login account
4.EnableHTTPorTelnetserverontheManagedSwitch
In case in-band management fails due to Managed Switch conguration
changes, out-of-band management can be used for conguring and managing
theManagedSwitch.
The Managed Switch is shipped with VLAN1 interface IP
address 192.168.0.254/24 assigned by default. User can
assign another IP address to the Managed Switch via the
console interface to be able to remotely access the Managed
Switch through Telnet or HTTP.
5
3. Requirements
zWorkstations running Windows 10/11, MAC OS 10.16 or later, Linux,
UNIX,orotherplatformsthatarecompatiblewithTCP/IPProtocols.
zWorkstationsareinstalledwithEthernetNIC(Network InterfaceCard)
zSerial Port Connection(Terminal)
The above Workstations come with COM Port (DB9) or USB-to-RS232
converter.
The above Workstations have been installed with terminal emulator,
suchasHyperTerminalincludedinWindows10/11,puttyorteraterm.
 Serial cable -- one end is attached to the RS232 serial port, while the
otherendtotheconsoleportoftheManagedSwitch.
zManagement Port Connection
Network cables -- Use standard network (UTP) cables with RJ45 connec-
tors.
 TheabovePCisinstalledwithWebbrowser
It is recommended to use Google Chrome or above to access
the Managed Switch. If the Web interface of the Managed
Switch is not accessible, please turn off the anti-virus software
orfirewallandthentryitagain.
6
4. Terminal Setup
To congure the system, connect a serial cable to a COM port on a PC or
notebook computer and to serial (console) port of the Managed Switch. The
console port of the Managed Switch is DCE already, so that you can connect
theconsoleportdirectlythroughPCwithouttheneedofNullModem.
Managed Switch
PC / Workstation
with
Terminal Emulation Software
Serial Port
RS232 to RJ45 Cable
Console Port
RJ45
Figure 4-1: Managed Switch Console Connectivity
A terminal program is required to make the software connection to the
Managed Switch. Tera Term program may be a good choice. The Tera Term
canbeaccessedfromtheStart menu.
1. Click START menu, then Programs, andthenTera Term.
2.When the followingscreen appears, make sure that the COMport should be
conguredas:
zBaud:9600
zParity:None
zDatabits:8
zStopbits:1
zFlowcontrol:None
Figure 4-2: Tera Term COM Port Conguration
7
4.1 Logging on to the Console
Once the terminal is connected to the device, power on the Managed Switch,
andtheterminalwilldisplay“running testing procedures”.
Then, the following message asks for the login user name and password. The
factory default user name and password are as follows as the login screen in
Figure4-3appears.
Username:admin
Password:admin
Figure 4-3: Managed Switch Console Login Screen
The user can now enter commands to manage the Switch. For a detailed
descriptionofthecommands,pleaserefertothefollowingchapters.
1.For security reason, please change and memorize the new
passwordafterthisfirstsetup.
2.Accept command in lowercase or uppercase letter under
consoleinterface.
8
4.2 ConguringIPAddress
TheIPaddresscongurationcommandsfor VLAN1 interface arelistedbelow.
Before using in-band management, the Managed Switch must be congured
with an IP address by out-of-band management (i.e. console mode). The
congurationcommandsareasfollows:
Switch>enable
Switch# cong
Switch_cong#interface vlan 1
Switch_cong_v1#ip address 192.168.1.254 255.255.255.0
The previous command would apply the following settings for the Managed
Switch.
IPv4 Address: 192.168.1.254
Subnet Mask: 255.255.255.0
Figure 4-4: Conguring IPv4 Address Screen
To check the current IP address or modify a new IP address for the Managed
Switch,pleaseusetheproceduresasfollows:
9
Show the current IP address
1. On “Switch#” prompt, enter “show ip interface brief”.
2.The screen displays the current IP address, subnet mask and gateway as
showninFigure4-5.
Figure 4-5: Showing IP Information Screen
If the IP is successfully congured, the Managed Switch will apply the new
IP address setting immediately. You can access the Web interface of Managed
SwitchthroughthenewIPaddress.
If you are not familiar with console command or the related
parameter, enter “help” anytime in console to get the help
description.
10
4.3 Setting1000BASE-Xfor10GSFP+Port
The Managed Switch supports both 1000BASE-X and 10GBASE-X SFP
transceivers by manual setting and the default SFP+ port speed is set in the
ber auto mode,sotheend-usercanplugthetransceiverdirectly.
In another example, the end-user has to force the ber connection with
1000BASE-X SFP transceiver in the tgigaethernet 0/1. The following
commandcongurationisrequired:
Switch#cong
Switch_cong#interface TGigaEthernet0/1
Switch_cong_tg0/1#no ber-auto-cong
Switch_cong_tg0/1#speed 1000
Switch_cong_tg0/1#exit
Figure 4-6: Setting 1000BASE-X for 10G SFP+ Screen
4.4 ChangingPassword
The default password of the switch is “admin”. For security reason, it is
recommended to change password and the following command conguration
isrequired:
Switch #cong
Switch_cong#username admin password planet2022
Switch_cong#
Figure 4-7: Changing Password Interface Screen
11
4.5 SavingtheConguration
In Managed Switch, the running conguration le stores in the RAM. In the
current version, the running conguration sequence running-cong can
be saved from the RAM to FLASH by write command, so that the running
conguration sequence becomes the start-up conguration le, which is called
congurationsave.
Switch#write
Switch#write
Saving current conguration...
OK!
Switch#Jan 2 00:56:04 /startup-cong is wrote, TID:85bd29c0
Figure 4-8: Write Screen
12
5. Starting Web Management
The Managed Switch provides a built-in browser interface. You can manage it
remotely by having a remote host with Web browser, such as Google Chrome,
MozillaFirefox,GoogleChromeorAppleSafari.
PC/Workstation with
Web Browser
192.168.0.X
Managed Switch
IP Address:
192.168.0.254
RJ45/UTP Cable
Figure 5-1: IP Management Diagram
The following shows how to start up the Web Management of the Managed
Switch. Please note the Managed Switch is congured through an Ethernet
connection. Please make sure the manager PC must be set to the same IP
subnet address.
For example, the IP address of the Managed Switch is congured with
192.168.0.254on Interface VLAN 1, then the managerPC should be set to
192.168.0.x(wherexisanumberbetween2and253,except1or254), and
thedefaultsubnetmaskis255.255.255.0.
Thefactorydefaultusernameandpasswordareasfollows:
DefaultIPofInterfaceVLAN1:192.168.0.254
Username:admin
Password:admin
13
5.1 LoggingintotheManagedSwitchfromCopperPorts
1.Use Google Chrome or above Web browser and enter IP address
http://192.168.0.254 (that you have just set in console) to access the
Webinterface.
2.When the following dialog box appears, please enter the congured user-
name “admin” and password “admin” (or the username/password you
havechangedviaconsole).The loginscreeninFigure5-2appears.
Figure 5-2: Login Screen
3.After entering the password, the main screen appears as shown in Figure
5-3.
Figure 5-3: Web Main Screen of Managed Switch
14
4.The Switch Menu on the left of the Web page lets you access all the
commandsandstatisticstheSwitchprovides.
Now, you can use the Web management interface to continue the switch
managementormanagethe ManagedSwitchbyconsole interface. Pleaserefer
totheusermanualformore.
5.2 SavingCongurationviatheWeb
Thecongurationarea isto showthe content thatis selectedin thenavigation
area. The conguration area always contains one or more buttons, such as
“Refresh”,Apply”and“Reset”.
The “Apply” button indicates applying the modied conguration to
the device. The application of the conguration does not mean that the
congurationissavedinthecongurationle.
To savethe conguration,you have toclick “Save All” on the top control bar.
“Save All”functionisequivalenttotheexecutionofthewritecommand.
Figure 5-4: Save Conguration
15
6. LED Indicators
6.1 SGS-6310-24T4X
System
LED Color Function
PWR Green LightstoindicatethattheSwitchhaspower.
O Poweriso.
SYS Green Slowblinkstoindicatethesystemisnormallystartingup.
Interfaces
LED Color Function
LNK/
ACT Green
Lights Indicatingtheportisrunningandtheconnection
issuccessfullyestablished.
Blinks Indicatingthattheswitchisactivelysendingor
receivingdataoverthatport.
10G Status LED
LED Color Function
LNK/ACT
(Ports 25-28) Green
Lights Indicatingtheportisrunningandthe
connectionissuccessfullyestablished.
Blinks Indicatingthattheswitchisactively
sendingorreceivingdataoverthatport.
6.2 SGS-6310-24P4X
System
LED Color Function
PWR Green LightstoindicatethattheSwitchhaspower.
O Poweriso.
SYS Green Slowblinkstoindicatethesystemisnormallystartingup.
16
Interfaces
LED Color Function
1000
LNK/ACT Green
Lights Indicatingtheportisrunningat1000Mbps
andsuccessfullyestablished.
Blinks Indicatingthattheswitchisactivelysendingor
receivingdataoverthatport.
10/100
LNK/ACT Amber
Lights Indicatingtheportisrunningat10/100Mbps
andsuccessfullyestablished.
Blinks Indicatingthattheswitchisactivelysendingor
receivingdataoverthatport.
802.3at
PoE
In-Use
Amber
Lights PDisconnectedandPoEpowersupplyis
normal.
O PDisnotconnectedorPoEpowersupplyisnot
provided.
10G Status LED
LED Color Function
10G
LNK/ACT Amber
Lights Indicatingtheportisrunningat10Gbpsand
successfullyestablished.
Blinks Indicatingthattheswitchisactivelysendingor
receivingdataoverthatport.
1000
LNK/ACT Green
Lights Indicatingtheportisrunningat1000Mbps
andsuccessfullyestablished.
Blinks Indicatingthattheswitchisactivelysendingor
receivingdataoverthatport.
6.3 SGS-6310-16S8C4XR
System
LED Color Function
PWR Green LightstoindicatethattheSwitchhaspower.
O Poweriso.
SYS Green Slowblinkstoindicatethesystemisnormallystartingup.
17
Interfaces
LED Color Function
LNK/
ACT Green
Lights Indicatingtheportisrunningandtheconnectionis
successfullyestablished.
Blinks Indicatingthattheswitchisactivelysendingor
receivingdataoverthatport.
10G Status LED
LED Color Function
LNK/ACT
(Ports 25-28) Green
Lights Indicatingtheportisrunningandthe
connectionissuccessfullyestablished.
Blinks Indicatingthattheswitchisactively
sendingorreceivingdataoverthatport.
6.4 SGS-6310-48T6X
System
LED Color Function
PWR Green LightstoindicatethattheSwitchhaspower.
O Poweriso.
SYS Green Slowblinkstoindicatethesystemisnormallystartingup.
Interfaces
LED Color Function
LNK/
ACT Green
Lights Indicatingtheportisrunningandtheconnectionis
successfullyestablished.
Blinks Indicatingthattheswitchisactivelysendingor
receivingdataoverthatport.
10G Status LED
LED Color Function
LNK/ACT
(TG1-TG6) Green
Lights Indicatingtheportisrunningandthe
connectionissuccessfullyestablished.
Blinks Indicatingthattheswitchisactivelysendingor
receivingdataoverthatport.
18
6.5 SGS-6310-48P6XR
LED Mode:WhenyoupresstheLEDModebutton,theLNK/ACTwillchange to
PoEdevice detectmode.
PWR
SYS PoE
LED
Mode
9600, N, 8, 1
Console
TG1
TG2
TG3
TG4
TG5
TG6
SGS-6310-48P6XR
Stackable Managed Switch
LNK
ACT
System
LED Color Function
PWR Green Lights LightstoindicatethattheSwitchhaspower.
O Poweriso.
SYS Green Slow blinks Toindicatethesystemisnormallystartingup.
PoE Green
Lights Toindicateports1to48LEDsareinPoE
devicedetectmode.
O Toindicateports1to48LEDsareinLNK/ACT
mode.
Interfaces
LED Color Function
LNK/ACT Green
Lights Indicatingtheportisrunningandthe
connectionissuccessfullyestablished.
Blinks Indicatingthattheswitchisactivelysending
orreceivingdataoverthatport.
802.3at
PoE-in-Use Green
Lights PDisconnectedandPoEpowersupplyis
normal.
O PDisnotconnectedorPoEpowersupplyis
notprovided.
19
10G Status LED
LED Color Function
LNK/ACT
(TG1-TG6) Green
Lights Indicatingtheportisrunningandthe
connectionissuccessfullyestablished.
Blinks Indicatingthattheswitchisactivelysendingor
receivingdataoverthatport.
20
7. Customer Support
Thank you for purchasing PLANET products. You can browse our online FAQ
resource at the PLANET Web site rst to check if it could solve your issue. If
youneedmoresupportinformation,pleasecontactPLANETsupport team.
PLANETonlineFAQs:
https://planet.com.tw/en/support/faq
Supportteammailaddress:
SGS-6310-SeriesUser’sManual
https://www.planet.com.tw/en/support/downloads?&method=keyword&keyword
=SGS-6310&view=3#list
Copyright ©PLANETTechnologyCorp.2023.
Contentsaresubjecttorevisionwithoutpriornotice.
PLANETisaregisteredtrademarkofPLANETTechnologyCorp.
Allothertrademarksbelongtotheirrespectiveowners.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20

Planet SGS-6310-16S8C4XR Quick start guide

Category
Network switches
Type
Quick start guide
This manual is also suitable for

Planet SGS-6310-16S8C4XR is a Layer 3 Gigabit/10 Gigabit Stackable Managed Switch with 16 100/1000X SFP ports, 8 Gigabit TP/SFP ports, and 4 10G SFP+ ports. It is designed for high-performance and reliable network connectivity in enterprise, data center, and campus environments. The switch offers advanced features such as Layer 3 routing, IPv6 support, Quality of Service (QoS), and security features to meet the demands of modern networks.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI