ZSZ MS-001 User manual

Brand: ZSZ

Model: MS-001

Type: User manual

12 3

zsz

Installation Manual

Part 1.Parts list Part 2.Parts identification Step 1.Check door dimensions

Emergency M-Key Exterior Assembly Latch

Latch Screws

Mounting Screws Interior Assembly

Battery CoverInterior Screws

35mm <door thickness <45mm

45mm <=door thickness <50mm

Door thickness:

1-3/8”to 2-3/4”

35mm to 70mm

2-3/8” or 2-3/4”

60mm or 70mm

Diameter:

2-1/8”(54mm)

Mounting Plate

(MS-001)

-1

6-2

9-1

8-1 9-2

6-3

6-4

4 -2

Step 2.Check door dimensions Step 3.Install exterior assembly Step 4.Install interior assembly Step 5. First startup

Step 6. Check after installation

Make sure the word "UP"

is facing up

Align latch slot with

door hole center

Ensure deadbolt be in unlock position

Ensure the emergency M-key works normally

Route the cable

under the latch

unlock

Route the cable

through the

mounting plate

hole

Ensure the paddle

is in the center of

the hole

Fix the mounting plate with

mounting screws

( / / )

Remove the

battery cover

Fix interior assembly

with interior screws

( / and )

Test the lock by rotating

the thumb turn to see if

the bolt can be extended

and retracted smoothly

Install the battery

and put the battery

cover on

Plug in the cable and ensure tight

the cable connection

When the lock first startup, it will automatically

adapt to the actual running direction through

unlocking and locking actions

Step 1-1: Enter default user code 123456 and unlock

key to check user code unlock function.

Step 1-2: Enter any fingerprint to check the fingerprint

unlock function.

Step 2: Check auto lock functionwait 10 seconds,

the lock will automatically close.

Step 3: Check hand knob open the lockrotate the

hand knob to smoothly open and close the lock.

Step 4: Check unlock/lock buttonclick the button

to open and close the lock normally.

Step 5: Check emergency M-key: use emergency

M-key can open and close the lock normally.

If all of these functions can be used normally, please

use the Smart Lock Product Manual to start setting

up your lock!

Paddle

vertical state

How to adjust the length of the latch

Facing the side with the up sign, press your thumb

against the deadbolt to ensure that it does not extend.

Rotate it clockwise, then pull it out and rotate it

counterclockwise until you hear a snap

6-1

6-2

6-1 6-2

6-3

6-4

6-3 6-4

9-1

9-1 9-2

9-2

8-1

4 -1

4-2

Test the paddle by rotating

it to see if the latch can be

extended and retracted

smoothly

ZSZ MS-001 User manual

Brand: ZSZ

Model: MS-001

Type: User manual

Download PDF

report

ZSZ MS-001 User manual

ZSZ MS-001 User manual

Other documents