2. JIECANG
  3. JCHR35W3C1-C2
JCHR35W3C1-C2

JIECANG JCHR35W3C1-C2 User manual

  • Hello! I've analyzed the provided user manual for JCH35W3C1 and JCH35W3C2 remote controllers. This document covers important details like channel and group toggling, position percentage settings, and battery information. I understand that the device is equipped with an LCD screen and supports up to 16 channels. I am ready to answer your questions related to this remote controller and its operation.
  • What is channel 0 used for?
    How do I know when to replace the battery?
    What type of battery should I use?
JCHR35W3C1/C2
Hand-held LCD Remote Controller
User Manual
01 Product Info
JCH35W3C1
16-channel LCD
remote controller
JCH35W3C1
16-channel LCD
remote controller
JCH35W3C2
16-channel dual control LCD
remote controller
JCH35W3C2
16-channel dual control LCD
remote controller
02 Buttons
03 Parameters(more info please refer to the nameplate)
04 Caution!
05 Instructions
a.Channels & Groups Toggling
When the voltage is too low, the LCD screen digital display will be weak, prompting to
replace the battery.
NoteChannel 0 is the group control for all the channels.
b.Number of Channels Setting
c.Number of Groups Setting
Shortpress ,ifyou
wanttheChannelinthe
group,theChannel
numberwillbesteady-lit.
Shortpress again,if
youwanttheChannelnot
inthegroup, theChannel
numberwillbeflashing.
d.Channel in Group Setting
e.Check the Channels in Groups
f.Prohibit Dual-key Operation
g.Position Percent Setting
h.For other operations, please refer to the motor operation instruction
icon
Stop on the desired percentage down
and wait 3s. The shades will move to the
chosen percentage down position.
/