MF DIGITAL LX1 & 5906 Quick Connect Guide

Type
Quick Connect Guide

This manual is also suitable for

5906
LX1 Quick Connect Guide
5906 Series
www.mfdigital.com
222
Page 2
Scribe EC Quick Installation Guide
with Prism PLUS Printer
Document Revision: 2004/12/07
LX1 Quick Connect Guide
Document Revision: 6/15/2005
Connection
Using a cross-over cable and ethernet ports from each
machine, connect the LX1 to the MF Digital unit with the
cross-over cable.
333
Page 3
Scribe EC Quick Installation Guide
with Prism PLUS Printer
Document Revision: 2004/12/07
LX1 Quick Connect Guide
Document Revision: 6/15/2005
Operation
1. Power up PRV-LX1 and MF Digital unit
2. Once MFD unit is powered up, click on "localhost
444
Page 4
Scribe EC Quick Installation Guide
with Prism PLUS Printer
Document Revision: 2004/12/07
LX1 Quick Connect Guide
Document Revision: 6/15/2005
In "localhost" click "send FTP image"
The FTPTREE dialog box will pop up.
555
Page 5
Scribe EC Quick Installation Guide
with Prism PLUS Printer
Document Revision: 2004/12/07
LX1 Quick Connect Guide
Document Revision: 6/15/2005
Here you enter the IP address, username and password of
the LX1 unit
Enter the IP address of the LX1. The default IP address
set by Pioneer is 192.168.0.16
666
Page 6
Scribe EC Quick Installation Guide
with Prism PLUS Printer
Document Revision: 2004/12/07
LX1 Quick Connect Guide
Document Revision: 6/15/2005
Enter the User Name for the LX1. The default User Name
set by Pioneer is PRVUser [case sensitive]
777
Page 7
Scribe EC Quick Installation Guide
with Prism PLUS Printer
Document Revision: 2004/12/07
LX1 Quick Connect Guide
Document Revision: 6/15/2005
Enter the Password for the LX1. The default Password set
by Pioneer is prv-lx1, [case sensitive]
888
Page 8
Scribe EC Quick Installation Guide
with Prism PLUS Printer
Document Revision: 2004/12/07
LX1 Quick Connect Guide
Document Revision: 6/15/2005
**Note, the Pioneer factory settings can change, refer to
the PRV-LX1 manual for IP Address, Username and
Password configurations
Click "Browse Site" and the LX1 directory will appear
999
Page 9
Scribe EC Quick Installation Guide
with Prism PLUS Printer
Document Revision: 2004/12/07
LX1 Quick Connect Guide
Document Revision: 6/15/2005
Click "imagefiles" on the PRV-LX1 directory to retrive
DVD image
Once the DVD image is selected/highlighted click "OK"
101010
Page 10
Scribe EC Quick Installation Guide
with Prism PLUS Printer
Document Revision: 2004/12/07
LX1 Quick Connect Guide
Document Revision: 6/15/2005
The FTPTREE dialog box will automatically close and the
LCD simulation display will show "receiving image XXX
MBs" on the "localhost" tab of the MF Digital software
This indicates the DVD image selected is now being
transferred to the MF Digital unit.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10

MF DIGITAL LX1 & 5906 Quick Connect Guide

Type
Quick Connect Guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI