-
1
-
Description
The aluminium enclosure supports any 3.5“ SATA HDD. To be connected through
USB 2.0 to any PC or Notebook.
Specication
• USB 2.0 specication revision 2.0
• Data transfer rate up to 480 Mbps
• For 3.5” SATA I or SATA II hard drives
• Dimension (LxWxH): 213 mm x 119 mm x 33 mm
• Hot Plug, Plug & Play
• For Windows 2000/XP/Vista, Mac OS 9.x or later
System requirements
• PC or Notebook with a free USB Port
• Windows 2000/XP/Vista, Mac OS 9.x or later
Package content*
• 3.5” external enclosure
• USB 2.0 cable, external power supply
• Stand, screws
• Driver CD
• User manual
*Make sure that the product package contains all items before operation. If any
item is missing or damaged, please contact your dealer immediately.
Hardware Installation
Note:
Follow the general instructions for installation of the enclosure. If necessary, read
the manual of your computer, or ask a specialist for help.
1. Unscrew the enclosure.
2. Take the plate and pull the slide-in frame
forward out of the housing.
3. Put the HDD into the intray and connect
the SATA connections.
4. Fasten the hard drive with provided screws to the slide-in frame.
5. Slide the frame back in to the enclosure and close the enclosure with the
screws.
6. Connect the power adapter to the power outlet and to the enclosure.