2. Roche
  3. cobas 8000 Data Manager
cobas 8000 Data Manager

Roche cobas 8000 Data Manager User manual

  • Hello! I am an AI chatbot trained to assist you with the Roche cobas 8000 Data Manager User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What does the Roche cobas 8000 data manager do, and what is its purpose?
    What is ModuleID, and where can I find it?
    What is SubModuleNo, and what does it represent?
    What is CalibrationID, and where can I find it?
    What is DataAlarmFlag, and what purpose does it serve?
    What is DateTimeCreated, and what information does it provide?
Roche Diagnostics
180 Operator's Manual · Version 1.03, Revision 1
9 Data clean-up and archiving cobas® 8000 data manager
TraceDocViewer reference
QC Control Details tab
SampleResult
Rack
ControlBottle
ModuleID
ID of module where results have been measured. This is
an internal ID defined by the CU. The modules and their
IDs can be seen on the Module filter criterion in Trace
doc viewer.
SubModuleNo
Sub-module (e.g. measuring cell) identification.
CalibrationID
ID of the calibration which was used to calculate this
result, also visible e.g. in the calibration trace of the CU.
DataAlarmFlag
Data alarm (alarm code) sent by the instrument.
DateTimeCreated
Result measurement time (when result was available).
ControlGIDFK
Displayed only for sample results. In case this is the
result of a patient measurement, the GID references the
preceding control measurement. TraceDoc uses this
value to make a link to the related QC result.
CalibrationGIDFK
The GID references the preceding calibration
measurement. TraceDoc uses this value to make a link to
the related calibration.
ReagentContainer SetID
Internal ID
IsRerun
Indicates, whether this result was created due to a rerun
order.
InstrumentReagentGIDFK
The GID references the reagent bottle which was used
for the measurement. TraceDoc uses this value to make a
link to the related reagent. The field is not displayed for
ISE results.
CTestResult (also applicable for ETestResult and ISETestResult)
Table 9-5 SampleResult > CTestResult
SampleResult
Operator
Login CU
IsSTAT
Indicates whether this is a STAT sample – false or true.
Table 9-6 SampleResult
Rack
RackID
ID of the rack.
Position
Sample position on the rack.
Table 9-7 SampleResult > Rack
ControlBottle
Lot
Lot number of QC material.
Code
QC code of the QC material.
BottleCountNo.
Bottle number on the control.
Sample Type
Sample type (can be SerumPlasma, Urine, CSF,
Supernatant, Others).
Table 9-8 SampleResult > ControlBottle
Roche Diagnostics
Operator's Manual · Version 1.03, Revision 1 181
cobas® 8000 data manager 9 Data clean-up and archiving
TraceDocViewer reference
CTestResult
Calibration Details tab
CCalibResult
CTestResult
ApplicationCode
Application code.
Result
Calculated result value of measurement.
QualitativeResult
Qualitative result value of measurement.
Uom
Measurement unit.
ModuleID
ID of module where results have been measured. This is
an internal ID defined by the CU. The modules and
their IDs can be seen on the Module filter criterion in
Trace doc viewer.
SubModuleNo
Sub-module (e.g. measuring cell) identification.
CalibrationID
ID of the calibration which was used to calculate this
result, also visible e.g. in the calibration trace of the CU.
DataAlarmFlag
Data alarm (alarm code) sent by the instrument.
DateTimeCreated
Result measurement time (when result was available).
ControlGIDFK
Displayed only for sample results. In case this is the
result of a patient measurement, the GID references the
preceding control measurement. TraceDoc uses this
value to make a link to the related QC result.
CalibrationGIDFK
The GID references the preceding calibration
measurement. TraceDoc uses this value to make a link
to the related calibration.
ReagentContainerSetID
Internal ID
IsRerun
Indicates, whether this result was created due to a rerun
order.
InstrumentReagentGIDFK
The GID references the reagent bottle which was used
for the measurement. TraceDoc uses this value to make
a link to the related reagent. The field is not displayed
for ISE results.
Table 9-9 SampleResult > CTestResult
CCalibResult
ModuleID
ID of the Module where the calibration has been performed.
SubModuleNo
Sub-module (e.g. reagent disk) identification.
Reason
Reason for calibration - contains one of the following
values:
o Manual.
o LotChange.
o LotTimeout.
o Container-Change (reagent pack changeover).
o ContainerTimeout (reagent pack timeout).
o QCFailed.
o DMRequest.
CalibrationID
ID of the calibration measurement.
Table 9-10 CCalibResult
/