Okamura SPRINT Web Camera Operating instructions
- Category
- Flat panel floor stands
- Type
- Operating instructions
Okamura SPRINT Web Camera is a versatile device that can be used to enhance your video conferencing and streaming experience. With its adjustable height and sturdy construction, you can easily position the camera to capture the perfect angle. The camera also features a built-in microphone, so you can be sure that your voice will be heard clearly. Whether you're using it for business or pleasure, the Okamura SPRINT Web Camera is a great choice for anyone who wants to improve the quality of their video communications.
Okamura SPRINT Web Camera is a versatile device that can be used to enhance your video conferencing and streaming experience. With its adjustable height and sturdy construction, you can easily position the camera to capture the perfect angle. The camera also features a built-in microphone, so you can be sure that your voice will be heard clearly. Whether you're using it for business or pleasure, the Okamura SPRINT Web Camera is a great choice for anyone who wants to improve the quality of their video communications.
G16JR72022-08
Creative furniture
Instructions for Use / Assembly Guide
【Web camera Stand for Monitor Stand】
1 2
6HFXULQJ
%UDFNHWV
6WUXW
6KHOI
0DNHXS
6FUHZV
:LULQJ&OLS
Parts Name
Installation
Information on Graphic Symbols
This Instruction Manual and indications on the products use various types of symbols to help you safely
and correctly use the products, preventing you, people nearby, and properties from being damaged.
The symbols mean as shown below. Make sure to understand the meaning of the symbols well before
reading the instructions.
CAUTION
CAUTION
ٴ
:KHQSODFLQJWKLQJVRQ WRS
SOHDVHSODFHWKHPJHQWO\
ٴ
'RQRWOHDQDJDLQVWWKHSURGXFW
RUVXSSRUW\RXUVHOIZLWK\RXU
KDQGVRQLWDVLWPD\GDPDJHLW
RUFDXVHLWWRIDOORYHU
ٴ
' R QRW SO DFH DQ\ WKLQ J ZLW K
GLPHQVLRQVWKDWSURWUXGHIURP
WKHEDVH
ٴ
,IWKHSURGXFWUDWWOHVGXHWRORRVH
VFUHZVSOHDVHWLJKWHQWKHP
DJDLQ
ٴ
'RQRWXVHWKHSURGXFWZKHQWKH
VFUHZVDUHORRVH
0D[LPXPORDGLQJFDSDFLW\؟
NJ
8QLIRUPO\GLVWULEXWHGZHLJKW
&$87,21
6KHOI6WUXWV
¼ڭ
0DNHXS6FUHZV
ق0¼/ك¼
:LULQJ&OLS¼
6HFXULQJ%UDFNHWV
¼ڭ
Do not handle roughly, or use improperly.
Failure to follow the safety precautions
cause injury or damage to the product.
● Do not use this product as a step stool or as
a transportation equipment.
● Do not lean against the camera stand or
monitor stand.
Be careful of the following items since it
may cause injury or damage the product.
● If the product starts to creak due to loose
bolts or screws, please be sure to tighten
them again. Loosening may cause problems.
● Do not use the product if any parts have
come off. It may cause damage or lead to
accidents, such as tipping over.
Do not disassemble or repair the product.
●
Do not attempt to disassemble or repair the product
yourself. Please contact our ocial dealers when needed.
●
Do not use the product with loose bolts or
screws. Failure may cause the main unit to be
broken and cause injury.
Do not put your hands or ngers in
the gaps or movable portions. Careless
handling may cause injury.
Never remodel the product. Failure
may cause a malfunction or accident.
● Remodeling by the customer may cause a
malfunction. In that case, Okamura will not
take any responsibility or liability for any
phenomena caused.
● If you need to remodel the product, contact
our Customer Service.
Do not load anything more than the maximum
loading capacity of the product. It may cause
you to fall or damage to the product.
●Maximum loading capacity:3kg（Uniformly
distributed weight）
＊ What is “Uniformly distributed weight”・・・
It means to load on a work surface, etc. evenly. Uneven loading on
the product may cause balance loss and thus drop or fall.
Appropriate Ventilation Measures
● Many chemical substances will be released by the product when it is rst purchased. Suciently
ventilate or expose the product to moving air for some time after purchasing it.
● Do not completely close windows when using the product in rooms with conspicuously high
temperatures/ humidity (the benchmarks for these are temperatures in excess of 28°C (82.4°F)
and relative humidity in excess of 50%).
3. Assembly Guide
Explanation Regarding Alert Labels
This product comes with an alert label intended
to prevent harm or damage to the user's life,
body or property. Please follow the precautions
when using the product. Do not intentionally
tear, stain, scratch or peel o the label.
Components
Make sure that you have all of the necessary parts before
Be sure to use the product indoors.
●
Do not use the product outdoors or in places exposed to
water. Failure may cause damage such as warping and mold.
Avoid places with high temperature, high
humidity, and extreme dryness. Failure may
cause deformation, discoloration, and mold.
Avoid places directly exposed to heat or
wind from stoves or air conditioners. Failure
may cause deformation or discoloration.
Avoid places exposed to direct sunlight.
Failure may cause deformation
or discoloration.
●
When installing the product near windows, constantly
block direct sunlight with curtains, blinds, etc.
Install the product so that it will be horizontal.
● When using the product, please keep the main
structure horizontal. Installing it where it cannot
be kept horizontal may distort the structure.
This indicates that improper handling may cause injury or property damage.
Caution
Secure enough workspace before assembly. Failure to do so may cause unexpected injury.
Assembly must be conducted by two or more people. Conducting by one person may cause injury.
Use specified tools for assembly. Improper assembly, such as not completely tightening screws, may cause damage to the
product or cause the product to overturn resulting in injury.
Take gloves off when using power tools. Gloves may get caught in tools causing injury.
Be careful when handling the ends and backs of parts, and with the gaps between parts. Careless handling may cause injury.
Assembly Preparations
Ensure that you have all the parts required.
Prepare tools for assembly.
Safety Instructions (Make sure to follow these instructions)
The symbols are there to call your attention to the parts indicated.
1.
Safety Instructions (Make sure to follow these instructions)
This indicates that improper handling may cause injury or property
damage.
CAUTION
Please follow the instructions below. Failure may cause damage to the product. In that case,
Okamura will not take any responsibility or liability for any phenomena caused.
2. Operating Precautions
For screws, lightly tighten and then completely tighten them.
Handle the product with care.
6WUXW
6HFXULQJ
%UDFNHWV
0DNHXS
6FUHZV +RUL]RQWDO6WUXWIRU
WKH0RQLWRUORZHU
ॖছ५ॺಌ
6HFXULQJ
%UDFNHWV
&ODZ
0DNHXS
6FUHZV
)URQW6LGH
%DFN6LGH
6KHOI
6KHOI
6WUXW
+RUL]RQWDO6WUXWIRU
WKH0RQLWRUORZHU
0RQLWRU
8SSHU
)UDPH
*DSRI
PP|
RUPRUH
)URQW6LGH
%DFN6LGH
&ODZ
6WUXW
0DNHXS6FUHZV
0DNHXS6FUHZV
6HFXULQJ
%UDFNHWV
6WUXW
+RUL]RQWDO6WUXWIRU
WKH0RQLWRU8SSHU
6WUXW
+RUL]RQWDO6WUXWIRU
WKH0RQLWRU8SSHU
3 4
Assembly Instructions
Assemble the product correctly according to the procedure.
1
Loosen the screws on the upper part of the
monitor stand and remove the securing brackets.
Place the strut of the Web camera Stand so that it can be
hooked to the center of the horizontal strut (lower) for the
monitor on the monitor stand.
Hold the Web camera Stand up and position it so that its strut fits around the horizontal strut
(lower) of the monitor from below, and secure the brackets in place from above.
Installing the Web camera Stand (below the monitor)
Insert makeup screws into the upper holes of the securing brackets,
and screw them in firmly so that the screw holes at the inner top
part of the struts are pulled in.
Use makeup screws to fix the shelf at a position where the holes on the
inside and outside of the strut align. The height can be adjusted at 3
levels (30 mm pitches).
Lift it so that the claws of the strut can be hooked to the
horizontal strut of the monitor.
2How to adjust the height of the shelf
Makeup Screws
M5 L12 3
1
Leave a gap of 50 mm (2'') or more between the upper frame of
the monitor stand and the top of the monitor.
Fix the shelf with the strut at the shortest length. Align the holes
on the inner and outer plates with the holes shown on the
diagram on the right, and fix them with makeup screws.
Place the strut of the Web camera Stand on the center of the
horizontal strut (upper) for the monitor on the monitor stand.
Secure the brackets from below
while holding the strut with your hand
so that it does not fall over.
Insert makeup screws into the lower
holes of the securing brackets, and
screw them in firmly so that the screw
holes in the inner struts are pulled in.
Installing the webcam rest (over the monitor)
Makeup Screws
M5 L12 3
The height of the shelf cannot be adjusted
when installed above the monitor.
Place the strut so that its claws are hooked on
the horizontal strut for the monitor.
3. Assembly Guide 3. Assembly Guide
If the monitor is already installed when attaching the Web camera Stand, some space is required between the horizontal strut (lower) for the monitor
and the back of the monitor. Loosen the screw affixing the monitor slightly and allow for some space before installing the Web camera Stand.
3RZHU&DEOH
3&&DEOH
:LULQJ
&OLS
:LULQJ&OLS
6HFXULQJ
%UDFNHWV
3&&DEOH
3RZHU&DEOH
6WUXW
&RYHU
:LULQJ
'XFW
&RYHU
:LULQJ
'XFW
/RZHU
)UDPH
/RZHU
)UDPH
6WUXW
&RYHU
:LULQJ
'XFW
&RYHU
:LULQJ
'XFW
+RUL]RQWDO6WUXW
IRUWKH0RQLWRU
ORZHU
Eective dimensions
of shelves
294mm(11 9/16”)×148mm(5 13/16”)
Maximum load capacity
3kg(6 lb) (Equally distributed load）
Height adjustment Not possible
mm(inch)
Eective dimensions
of shelves
296mm(11 5/8”)×
236mm(9 5/16”)
Maximum load capacity
3kg (Equally distributed load）
Height adjustment
3 levels (range of adjustment 90mm(3 9/16”))
mm(inch)
5 6
Main materials and surface nish
[Steel part]
● Wipe o with a dry soft clean cloth.
● Immediately wipe o any water.
● Immediately wipe o any dust or ngerprints
(sebum).
〈Cautions〉
● Do not leave any water on the steel part.
Do not use a chemical cloth or an organic
solvent such as thinner and benzene. Please
note that the product with its color or
texture deteriorated cannot be restored to
its original state.
5. Instructions to Extend the Life of Product
Daily care
Operating Precautions and Maintenance
● If the product has become unsteady due to
loosening of the bolts or screws during use,
retighten them immediately.
● This Instruction Manual is very important, so
store it in an easily accessible location.
● Regular maintenance is recommended for
long-life use. Please request us early for
inspections and repairs (fees required) when
the warranty has expired.
Please follow the instructions below. Failure may cause damage to the product. In that case,
Okamura will not take any responsibility or liability for any phenomena caused.
Structural Part Materials Web camera Stand
Web camera Stand Shelf Steel Amino-alkyd resin coating
or Polyester coating
Strut Steel
＊Note that product specications may change without notice in order to improve them.
6. Specications
4. Operation Guide
Wiring Method / Route
■ Installing above the monitor
Remove the strut cover and wiring duct cover, and wire inside the strut, inside the wiring duct, and
inside the lower frame. The small duct covers (4 places) on both ends can be lifted by pressing on
the ends with your ngers.
■ Installing under the monitor
Remove the strut cover and wiring duct cover, and wire inside the strut,
inside the wiring duct, and inside the lower frame. At that time, secure the
cabling to the horizontal strut for the monitor (lower) with a wiring clip.
The small duct covers (4 places) on both ends can be lifted by
pressing on the ends with your ngers.
-
1
-
2
-
3
-
4
Okamura SPRINT Web Camera Operating instructions
- Category
- Flat panel floor stands
- Type
- Operating instructions
Okamura SPRINT Web Camera is a versatile device that can be used to enhance your video conferencing and streaming experience. With its adjustable height and sturdy construction, you can easily position the camera to capture the perfect angle. The camera also features a built-in microphone, so you can be sure that your voice will be heard clearly. Whether you're using it for business or pleasure, the Okamura SPRINT Web Camera is a great choice for anyone who wants to improve the quality of their video communications.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Okamura Sprint Operating instructions
-
Okamura Lives Shelf Operating instructions
-
Okamura Lives Shelf Operating instructions
-
Okamura NAGARE Operating instructions
-
Okamura NAGARE Operating instructions
-
Okamura Traverse Operating instructions
-
Okamura Traverse Operating instructions
-
Okamura Lives Pouf Operating instructions
Other documents
-
GE ZV800SJSS Installation guide
-
Monogram GEZV950SDSS Installation guide
-
GE CVW73012MSS Installation guide
-
Wind Crest WSB362S User manual
-
-
Micro Motion CMF400 Installation guide
-
-
GE ZHU36RSPSS Installation guide
-
GE ZV36SSJSS Installation guide
-
Bowflex HVT Owner's/Assembly Manual
