Contixo KB5 Owner's manual

Brand
Contixo
Model
KB5
Category
Portable speakers
Type
Owner's manual
Features
This product is a new type of children's Bluetooth headset, using
Bluetooth technology, with SBC, MP3, AAC audio decoding function,
and also has A2DP, AVRCP high-quality stereo audio transmission and
remote control protocol, and also supports voice prompts; allowing
users at any time you can easily and quickly enjoy high-quality
music anywhere, compatible with answering/hanging up calls, etc.,
and supporting most Bluetooth terminal devices.
Thank you for choosing our products. In order to better use
and understand this product, please read the
following carefully before use.
1. Support Bluetooth wireless playback.
2. Stereo playback, large magnet full-range speaker.
3. High-sensitivity microphone, support hands-free call.
4. The volume is automatically reduced to protect children’s hearing.
5. Support 3.5mm audio input
6. Foldable and easy to carry
7. Adjustable headband
8. Large capacity lithium battery
Button Instructions
Long press to switch
to the next song;
Short press to increase
the volume
Long press to turn on;
short press to pause/play
(When a call comes in,
short press to
answer/hang up;
long press to reject)
Long press to switch
to the previous song;
Short press to decrease
the volume
MIC
Long press to turn
on/o the light
Indicator light
TYPE-C charging port
3.5mm external audio interface
Product Description
Headwear pull adjustment
assembly
Folding portable components
Microphone
TYPE-C charging port
3.5mm external audio
interface
Speaker
Volume control area
Light control button
8
7
6
5
4
3
2
1
Category
Basic
item
RGB
Call
Basic skills
Bluetooth
name
Button
LED
Boot up
Shut down
Pairing
Last code
redial
Answer the
phone
Refuse to
answer
Hang up
the phone
Volume up
Volume down
In the connected standby state, double-click the switch
button to call back the last number dialed by the phone
When a call comes in, press the middle button once to
answer the call
When you call, press and hold the middle button for
about 2 seconds to reject the call from the other party
Click the middle button during a call to end the call
During a call, short press vol+ key to increase the volume
During a call, short press the vol- key to decrease the
volume
Bluetooth
distance
Switch button, vol-, vol+, previous song, next song,
light button
KB5
Blue light, red light, RGB
Operation steps and related instructions
Bluetooth headset detailed function table
Press and hold the power button for 3 seconds to power
prompt sound POWER ON
Press and hold for 5 seconds to shut down, and there will
be a sound POWER OFF
Pairing status; prompt tone Pairing, red and blue lights
once every 3 seconds
The barrier-free distance for playing Bluetooth music is
greater than or equal to 10 meters
Turn on
the lights
the lights
In the Bluetooth power-on state, long press the light on
button for 5 seconds and the light will be on, and in the
3 seconds and the light will be on, and the blue light will
seconds
Music
Pause music
Play music
Previous song
Next song
Volume down
Music playback status, long press vol+ key to switch to
the next song
In music playing state, short press vol-key to decrease the
volume
Music playback status, click the switch button, you can
pause the music
When the music is paused, click the switch button to
continue playing music
Music playback status, long press vol-key to switch to the
previous song
Volume up In the music playing state, short press the vol+ key to
increase the volume
Model
Pairing name
Capacity 400 mAh
KB5
KB5
Standby time
Charging time
Charging port
Operating Voltage
Sound unit
Impedance
Frequency
Sensitivity
Maximum power
Call time
Charging current
Shutdown state> 80 days
2.5 hours
TYPE-C
3.7V
φ30mm
(32±15%), 1KHz
20-20KHZ
85dB +/-3db(1KHz)
30mw
14 hours
13.5-18.5MA
YOUR HEADPHONES MUST BE PAIRED TO A BLUETOOTH CAPABLE
DEVICE BEFORE IT CAN BE USED. PLEASE FOLLOW THE BELOW
STEPS TO PAIR
1. Open the Bluetooth Menu on the device you wish to pair. Some
devices require you to select "Search for Devices" or "Add New Device"
in order to create a Bluetooth Pairing.
button. The headphones will say "PAIRING." The red and blue LED lights
will ash in an alternating pattern while the KB5 is in pairing mode.
2. With the headphones turned o, long press the power ON/OFF
3. Wait until you see "KB5" on your device screen.
4. Select "KB5" on your device and follow any further prompts to pair.
Once pairing is complete and connection is established, LED lights will
stay blue.
KB5 Bluetooth Headphones
1
2
3
4
5
6
7
8
LOGO
LIGHTS
UP AND
CHANGES
COLORS!
  • Page 1 1

Contixo KB5 Owner's manual

Brand
Contixo
Model
KB5
Category
Portable speakers
Type
Owner's manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents