HIFI WALKER T10 Air Bone Conduction Bluetooth Headphones Operating instructions

Brand: HIFI WALKER

Model: T10 Air Bone Conduction Bluetooth Headphones

Type: Operating instructions

HIFI WALKER T10 Air Bone Conduction Bluetooth Headphones offer a unique audio experience with their innovative bone conduction technology. These headphones allow you to enjoy music and take calls without compromising situational awareness, making them ideal for sports, workouts, and outdoor activities. With a built-in MP3 player and 32GB of storage, you can store and listen to your favorite music without the need for a smartphone. The headphones are also IPX8 waterproof, making them perfect for use in rainy weather or during intense workouts.

HIFI WALKER T10 Air

Bone Conduction Bluetooth Headphones

User Manual

Button Instruction

Indicator light Magnetic charging port

Volume "-" button Power button

Volume "+" button Microphone

Wearing Instruction

Take the headphones and turn it behind the

base of the neck. Put the ear hook on your ears.

After that, please enjoy music.

How to Set Up HIFI WALKER T10 Air

1. Charging

Charge the headphones using the included magnetic

charging cable. The LED indicator will change from red

to blue when charging is complete. It typically takes

approximately 2 hours for a full charge.

2. Pairing & Connecting

Start with your headphones off. Press and hold the

power button for 3-5 seconds until the T10 Air says

"Bluetooth Mode" and the LED indicator ﬂashes red

and blue.

Open the Bluetooth menu on your device and select

"T10 Air." The T10 Air will say "Connected" and the

LED indicator will ﬂash blue once.

3. Bluetooth/MP3 Mode Switching

You can easily switch between Bluetooth and MP3

modes by double-clicking the power button. If you

double-click the power button to enter MP3 mode,

the T10 Air will indicate "TF Card Mode." Please note

that the device automatically defaults to Bluetooth

mode when powered on.

Song Download:

Connect the original charging cable to the computer

and headphones, and you can access the USB drive to

copy songs from the computer to the USB drive.

Quick Reference Chart

Function Operation Indicator

Indicator

Headphone

status

Click “ ”Play music

Click the on/off button

Power On Press and hold Power

button for 3 seconds Light On

Power Off

Function

Increase

volume

Click “ ”Play music

Reduce

volume

Press and Hold “ ”Play music

Click and Hold “ ”Play music

Last song

Next song

Click the power button

Play musicPause

PauseResume

Music Play

Press and hold Power

button for 3 seconds Light Off

Answer Call

Indicator

Short press the

power button to

answer

Long press the power

button for 1 second to

hang up

Headphone

status

Function

Incoming

call

Incoming

call

Answer the

cal

Decline the

call

click " " / " " During call

Long press and hold

the power button for

2 second

During call

volume

control

Phone/Blue

-tooth Head

-phone switch

Voice Control

(The phone needs to support the voice wake-up

function)

Indicator

Note: In Bluetooth connected mode, press and

hold the power button for 3 seconds to wake up the

device. Once you hear the prompt sound, you can

use voice commands to control your phone, saving

time and enabling convenient smart operations.

Operation

Headphone

status

Function

Constant red light

Charging in progress

Constant blue light

Charging complete

Red and blue lights

ﬂashing alternately

Searching for pairing

Blue light ﬂashing

slowly for 5 seconds

Bluetooth music

playback

Press and hold the power

button for 3 second

Bluetooth is

connected

Voice

Contro

Speciﬁcation

Model T10 Air

HIFI

WALKER

Brand

Frequency

response rang 20-20KHz

Bluetooth

Version

Signal-to-noise

ratio >85dB10m

Wireless

Range

Standby time 110 hours

Up to

8 hours

Continuous

Play

Charge Time 2 hours

Polymer

battery

Battery

Input 5V/180mA230mAh

Battery

capacity

Built-in

Memory 32GBIPX8

a2dp1.3.2\ avctp1.4\ avdtp 1.3\ avrcp

1.6.2\hfp 1.8\spp1.2\rfcomm1.1\pnp1.3\

hid1.1.1\sdpcore5.3\l2cap core5.3

Water

resistance

Compatible

proﬁles

WAV, FLAC, WMA, AAC, MP3, APE,

M4A

Music format

support

Maintenance and Cleaning:

The headphones should not be immersed in

seawater/saltwater for an extended period. After

use, rinse with fresh water and dry the magnetic

charging area promptly to prevent corrosion.

If not in use for a long time, please fully charge

the headphones at least once a month.

Do not disassemble any parts of the product

without authorization. If any defects are found,

immediately stop using the product and contact

the seller for after-sales support.

After each workout, wipe the surface of the

headphones clean, especially the magnetic charging

area. Promptly clean and dry to prevent sweat and

saltwater from corroding the charging port, which

may affect the product's lifespan.

Keep the product away from ﬁre, heat sources,

freezing sources, and chemicals. Avoid violent

impact, disassembly, or squeezing of the product.

Please use a charging adapter with an output of

5V1A or lower.

support@hiﬁwalker.com

Warranty and After-sales Service

If you have any questions about this headphones, or

technical questions, or you think it is malfunctioning.

please contact our support center.

We make every effort to ensure the quality of our

products, but if the product is damaged or soiled,

please contact us by email.

Bluetooth

5.3

HIFI WALKER T10 Air Bone Conduction Bluetooth Headphones Operating instructions

HIFI WALKER T10 Air Bone Conduction Bluetooth Headphones Operating instructions

HIFI WALKER T10 Air Bone Conduction Bluetooth Headphones Operating instructions

Other documents