ferm LIVING Rink Table Assembly Manual

Brand
ferm LIVING
Model
Rink Table
Type
Assembly Manual
Assembly manual
Rink Dining Table
General Instructions
PLEASE READ BEFORE INSTALLATION
ATTENTION:
High-gloss is a sensitive surface. Do not put anything directly on the table top.
Always use coasters or other protective items with a soft surface
Needed Tools
Box Content
1 x Table top
1 x Left side leg
1 x Right side leg
1 x Middle rail
4 x Brown pad
4 x Screw (A)
4 x Nut 16 x Screw (B)
4 x Cross nut 16 x Spring washer
16 x Flatwasher 1 x Allen key
4 x Wood dowel
Screwdriver Crosshead
2 3
1 2
Assembly ProcessAssembly Process
Install 2x brown pads on the
bottom of each table legs.
Mount 2x screws and 2x wooden dowel
on the side of each table legs.
x 2
x 2
4 5
3 4
Assembly ProcessAssembly Process
Mount the middle rail to each side legs and screw the
4x connector (nut and cross nut) in the rail.
Assembly the full leg and middle rail to the table top.
Screw 8x screws with 1x spring washers and 1x flat washers each into the tabletop.
6 7
fermliving.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

ferm LIVING Rink Table Assembly Manual

Brand
ferm LIVING
Model
Rink Table
Type
Assembly Manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents