FILMCITY DSLR Camera Cage Shoulder Rig Kit 1
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic,
mechanical, photocopying, recording, or otherwise, except as may be expressly permitted by the applicable copyright statutes or in
writing by the Publisher.
DSLR Camera Cage Shoulder Rig Kit
(FC-03)
I N S T R U C T I O N M A N U A L
FILMCITY DSLR Camera Cage Shoulder Rig Kit 2
INTRODUCTION
The most challenging part in lmmaking is to create smooth, clean and planned shots that give
viewers the feeling of oang along with the subject maer - this cannot be achieved by holding
the camera in your hand.
Shoulder Rig is an essenal equipment that helps you keep the camera stabilized while giving
you the freedom to follow your subject. The FC-03 Shoulder Rig comes with a Mae Box, a
Follow Focus, and Cage Brackets, leng you capture your shots with ease in any situaon.
IN THE BOX
Please inspect the contents of your shipped package to ensure you have received all that is
pictured and listed below.
MB-600 mae box
2 x 100mm Male Rods
2 x 300mm Female Rods
2 x 300mm Male Rods
2 x 200mm Female Rods
1 x 300mm knurling Rod
Z-Bracket & straight
bracket
Speed crank
Gear ring
HS-2 Follow Focus
Tripod Mounng
Plate
Shoulder pad
2 x 150mm Male Rods
Accessories
Juncon rod
adapter
9” Cage Brackets
Camera Base with
Quick Release
Front handle
Top handle
Accessory
mounng plate
Top Handle
clamp
Front handle
bracket clamps
Counter Weight
FILMCITY DSLR Camera Cage Shoulder Rig Kit 3
ASSEMBLING YOUR SHOULDER RIG KIT
Now aach the quick release of your uid head with the camera base with quick release
and ghten the bolt with screw driver.
Now mount it on uid head and
secure it properly by ghtening the
knob.
Insert the 300mm female threaded rods into the camera base with quick release and
ghten the bolt with the help of provided allen key to secure it properly.
FILMCITY DSLR Camera Cage Shoulder Rig Kit 4
MOUNTING THE CAMERA
Aach the camera on quick release plate and ghten the bolt with screw driver.
Loosen the ratchet knob and remove
the quick release plate by pressing
the quick release pin.
Now mount the camera on the camera base and ghten the knob to secure .
FILMCITY DSLR Camera Cage Shoulder Rig Kit 5
Aach both the brackets with rods and
ghten the knobs to secure it properly.
Insert the 2x200mm female threaded rods into cage brackets on the top .
Aach the top handle with 200mm rods and ghten the knobs to secure it properly.
Aach the straight bracket to the end of the rods and secure it properly with the help of
provided knob.
FILMCITY DSLR Camera Cage Shoulder Rig Kit 6
Now insert the 300mm male threaded rods into the straight bracket and ghten the knob to
secure properly.
Aach the shoulder pad and counterweight into the rods and secure it properly with the
help of provided knob.
Aach the 150mm male rods at the
front to extend it for mounng your
mae box and handles.
FILMCITY DSLR Camera Cage Shoulder Rig Kit 7
Aach gear ring to camera lens and ghten properly. Insert HS-2 follow focus to front of
rods and secure it properly with the help of provided knob.
ATTACHING THE FOLLOW FOCUS
NOTE: You can aach speed crank to follow
focus as per your requirement.
Now aach the mae box to the front of rods, align the knicker with the lense barrel and
ghten the knot.
FILMCITY DSLR Camera Cage Shoulder Rig Kit 8
Aach the juncon rod adapters and slide-in the rod through it in order to aach the
handles. Tighten the knobs to secure the adapters and rod properly.
Aach the handles at both sides and
ghten the knobs to secure the
adapters and rod properly.
YOUR FILMCITY DSLR CAMERA CAGE SHOULDER RIG KIT
ALL DRESSED UP AND GOOD TO GO
(SHOWN WITH OPTIONAL ACCESSORIES)
FILMCITY DSLR Camera Cage Shoulder Rig Kit 9
WARRANTY
We oer a one year warranty for our products from the date of purchase.
We will repair or replace your product, free of charge, in the event of a defect in materials or
crasmanship obtained during normal use or handling based on the user manual. Please note
that we will not cover any shipping costs for returning the product to us. If any VAT or
import dues are applied to the return, we will also charge these costs to the customer.
The warranty does not include, by the way of example, damage caused by products that we do
not supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product ,
or service by anyone other than our company.
We are not liable for incidental or consequenal damages resulng from the use of the unit or
occurring due to any breach of this warranty.
Replacement parts of the product will be provided at nominal cost (covering the cost price of
the replacement parts only) to the customers aer the Warranty Period has expired. We will
cover the complete cost of sending replacement parts within the warranty period. Aer that,
nominal cost of the product & Actual shipping cost will be charged.
Do not send the unit to us without rst geng a response and geng the approval to send
back the item.
In case of any kind of dissasfacon, we urge you to Contact us immediately and we shall do
our best to help you out.
For any other assistance you can reach us via email.
/
