Camtree SKU344 User manual

Brand: Camtree

Model: SKU344

Type: User manual

Camtree SKU344 is a versatile tool that enables you to mount your DV/DSLR/Mirror Less cameras on most flat surfaces where handheld and fixed mount configurations are not feasible. It utilizes robust industrial suction cups to establish secure load-bearing contact for cameras weighing up to 4kg/9lbs. With Camtree SKU344, you can add a touch of dynamism to your productions, capturing stunning footage on land, sea, and air. It empowers you to explore innovative camera angles and perspectives, enhancing the visual appeal of your content.

No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any

means, electronic, mechanical, photocopying, recording, or otherwise, except as may be expressly permied

by the applicable copyright statutes or in wring by the Publisher.

Gripper Campod Suction Car Mount

(G-51)

I NSTR UC T I O N M A N UA L

CAMTREE GRIPPER G-51 2

I NT RO D UC TI O N

Our G-51 GRIPPER is a custom designed producon tool that allows shooters to mount their DV/

DSLR/Mirror Less cameras on most at surfaces where handheld and xed mount conguraons

are not possible. Using strong Industrial sucon cups for posive load-bearing contact for

cameras up to 4kg/9lbs, the G-51 adds the “Wow” factor to producon value most evident in

running footage on land, sea and air.

I N T H E B O X

Please inspect the contents of your shipped package to ensure you have received all that is

pictured and listed below.

3 x 3” Rods

A S S E MB LIN G Y O UR G R I P P E R G - 5 1 C A M P O D S U C T I O N C A R M O U N T

3 x Gripper Sucon Cups

6 x 6” Rods

6 x 6 - Ball Tilt Heads

2 x Safety Wires

Complimentary Dust Covers

3 x Shanks For Gripper Cups

2 x C-hooks

2 x Round Hooks

Camera Mount Hub

CAMTREE GRIPPER G-51 3

 Using the camera hub, screw the 6” or 3” rod into one of the central holes. Complete this

process by using two other of rods to build your tripod.

 While building your G-51 and choosing which holes to use in the hub, keep in mind the

relaonship between the surface being used to mount the G-51 and the posion of the

camera. This will allow you to choose the correct hub holes.

 Adjust the span of the tripod legs by adding dierent length rods as required to reach the

mounng surface.

 Now insert ball lt head into the rods, then ghten to secure properly and then screw-in

other rod into ball lt head. Connue the process to aach all three legs.

 Select a surface posion for your rst sucon cup and leg and lock it with the lever on the

sucon cup. Connue this process for all sucon cup. Make sure to ghten all connecons

to avoid accidental loss of camera and rig.

CAMTREE GRIPPER G-51 4

 Add ball lt heads to the sucon cups and secure.

 Now aach the rods into ball lt head and

secure it properly.

 Now aach the leveling base (Not Included) with camera hub and secure it with provided

knob.

 Now aach the round hook with camera hub and insert one end of safety cable to the hook.

CAMTREE GRIPPER G-51 5

 Now aach the c-hook with your clamping surface and aach the other end of say cable

 Using the screw located in the middle of

the camera hub, aach the hub to the

camera.

NOTE: The design and manufacture of this rig supports cameras up to 4kg/9lbs and is meant for

use when traveling at speed of a maximum of 40 KM/hr. Do not exceed these specicaons.

YOUR CA M T R E E G R I PPER G -51 CAMPOD S U C T I O N C A R M OU N T

All DRES S E D UP AND GOO D TO G O

CAMTREE GRIPPER G-51 6

WARRANTY

We oer a limited me warranty for our products. For mechanical products we provide a 6

month warranty & for electronic products we provide a 3 month warranty from the date of

purchase.

We will repair or replace your product, free of charge, in the event of a defect in materials or

crasmanship obtained during normal use or handling based on the user manual. Please note

that we will not cover any shipping costs for returning the product to us. If any VAT or import

dues are applied to the return, we will also charge these costs to the customer.

The warranty does not include, by the way of example, damage caused by products that we do

not supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product ,

or service by anyone other than our company.

We are not liable for incidental or consequenal damages resulng from the use of the unit or

occurring due to any breach of this warranty.

Replacement parts of the product will be provided at nominal cost (covering the cost price of the

replacement parts only) to the customers aer the Warranty Period has expired. We will cover

the complete cost of sending replacement parts within the warranty period. Aer that, nominal

cost of the product & actual shipping cost will be charged.

Do not send the unit to us without rst geng a response and geng the approval to send back

the item.

In case of any kind of dissasfacon, we urge you to Contact us immediately and we shall do our

best to help you out.

For any other assistance you can reach us via email.

Camtree SKU344 User manual

Camtree SKU344 User manual

Camtree SKU344 User manual

Related papers

Other documents