FILMCITY FC-02-P User manual

Brand: FILMCITY

Model: FC-02-P

Type: User manual

FILMCITY POWER SHOULDER RIG 1

POWER DSLR Camera Cage Shoulder

Rig Kit

I N S T R U C T I O N M A N U A L

No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any

means, electronic, mechanical, photocopying, recording, or otherwise, except as may be expressly permied by

the applicable copyright statutes or in wring by the Publisher.

FILMCITY POWER SHOULDER RIG 2

I N T R O D U C T I O N

Our Filmcity Shoulder Rig kit meets and exceeds the requirement of DSLR users by

providing professional look production value at an affordable price.

I N T H E B O X

Please inspect the contents of your shipped package to ensure you have received all

that is pictured and listed below.

Note: If you have purchased (FC-02-P) kit, then you will receive the following:

Matte Box MB-600

Straight & Z-Bracket

Shoulder Pad

Top Handle

French and Side Flags

1 x Handle Set

Camera Base with

Quick Release

Counter Weight

2x 150mm Male

threaded Rods

Front handle

bracket clamps

2x 200mm Female

threaded Rods

2x 300mm Female

threaded Rods

Clamps For Handle Set

Front Handle

9” Cage Brackets

Front Handle Rod

HS-2 Follow Focus

Speed Crank

Gear Belt

Handle Bracket

Accessories

2x 300mm Male

threaded Rods

Top Handle

Bracket

Note: If you have purchased (FC-03-P) kit, then only you will receive the following along with the

above menoned parts:

FILMCITY POWER SHOULDER RIG 3

A S S E M B LIN G YO U R M B - 6 0 0 M AT T E BOX

 Insert the french flag in to the matte box and tighten the screws. Using the same

approach, insert the side flags into the (big) slots provided in the hinges and

secure with the screws.

 Insert the filter holders to your matte box as shown below.

Note: For better gripping of filter in filter holder, retighten the filter tray knob to

secure the filter properly.

Note: If the french flag( top) remain

loose even after tightening the knob

you have to slightly tighten the allen

bolt as shown in the image

FILMCITY POWER SHOULDER RIG 4

 Attach knicker on conversion ring, then screw in the conversion ring on ring holder .

A S S E M B LIN G YO U R R I G K I T

 Attach the quick release plate of your tripod head with base plate and tighten it

with the help of screw driver.

 Now mount the camera base on fluid head and secure it properly by tightening

the knob.

FILMCITY POWER SHOULDER RIG 5

 Attach the camera with quick release plate and tighten the bolt to secure

properly.

 Now mount the camera onto the base plate and tighten the knob to secure it.

 Insert the rod into camera base and secure it properly with the help of allen

key.

 Attach the 9” cage brackets with the rods and tighten the knobs to secure.

FILMCITY POWER SHOULDER RIG 6

 Now, attach the rods on the top of cage brackets in order to attach the top

handle.

 Attach the straight bracket to the end of the rods and secure it properly with

the help of provided knob.

 Now insert the 300mm rods into the straight bracket and tighten the knob to

secure properly.

 Attach the shoulder pad and counterweight into the rods and secure it properly

with the help of provided knob.

FILMCITY POWER SHOULDER RIG 7

 Attach the 150mm male rods at the front to extend it for mounting your matte

box and handles.

Note: If you have purchased (FC-03-P) kit, follow the below steps as well:

 Attach gear ring to camera lens and tighten the screw.

 Now insert HS -2 follow focus into the front of rods, adjust with gear ring and

tighten the knob to secure it.

FILMCITY POWER SHOULDER RIG 8

 You can aach speed crank to follow focus as

per your requirement.

 Attach the front handle bracket clamps with bracket, attach it with the rods and

secure it properly with the help of allen key.

Note: The front handle bracket

clamps are the ones with allen bolts.

 Now insert rod into the front bracket

and secure it properly with the help of

allen key.

FILMCITY POWER SHOULDER RIG 9

 Insert the handle clamp into the rods and screw the handle into the handle

clamp.

 Insert the matte box in front side of rods barrel properly and tighten the knot.

Note: The front handle bracket

clamps are the ones without allen

bolts

YO U R FI L M C I T Y POWER SHOULDER RIG KIT

AL L D RE S S ED UP A N D G OO D TO G O

FILMCITY POWER SHOULDER RIG 10

WARRANTY

We oer a limited me warranty for our products. For Mechanical products we provide a 6 month

warranty & for electronic products we provide a 3 month warranty from the date of purchase.

We will repair or replace your product, free of charge, in the event of a defect in materials or

crasmanship obtained during normal use or handling based on the user manual. Please note that

we will not cover any shipping costs for returning the product to us. If any VAT or import dues are

applied to the return, we will also charge these costs to the customer.

The warranty does not include, by the way of example, damage caused by products that we do not

supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product , or

service by anyone other than our company.

We are not liable for incidental or consequenal damages resulng from the use of the unit or

occurring due to any breach of this warranty.

Replacement parts of the product will be provided at nominal cost (covering the cost price of the

replacement parts only) to the customers aer the Warranty Period has expired. We will cover the

complete cost of sending replacement parts within the warranty period. Aer that, Nominal cost

of the product & Actual shipping cost will be charged.

Do not send the unit to us without rst geng a response and geng the approval to send back

the item.

In case of any kind of dissasfacon, we urge you to Contact us immediately and we shall do our

best to help you out.

For any other assistance you can reach us via email.

FILMCITY FC-02-P User manual

Brand: FILMCITY

Model: FC-02-P

Type: User manual

Download PDF

report

FILMCITY FC-02-P User manual

FILMCITY FC-02-P User manual

Related papers

Other documents