2. Server
  3. Eco

Server Eco User guide

  • Hello! I've reviewed the user guide for the Server Eco Pump, model XXXX. This document provides a quick start guide with clear instructions on assembling, disassembling, cleaning and using your new Eco Pump. The guide also covers important aspects like proper lubrication and fitting of the various parts to ensure proper functionality and reduce portion size. I'm ready to answer any questions you might have about the device.
  • What should I do before using the pump?
    How do I install the seal?
    How do I install the cap?
Install O-ring into seal. Apply
food equipment lubricant on
O-ring.
Install seal onto head
assembly piston. Apply
small amount of food
equipment lubricant
inside seal. Flared end
of seal should face
away from piston head.
Install pinch valve
securely to seal end.
Squeeze pinch valve
open before installation.
Install gaging collar(s)
onto side of head
assembly piston to reduce
portion size.
Insert spring into cylinder.
Install head
assembly into
cylinder. Apply
small amount of
food equipment
lubricant inside
top of cylinder and
outside of seal.
Slide locking collar
down onto cylinder
threading. Tighten
rmly.
4
2
5Snap cap onto cylinder. Press rmly to secure cap
down over all threading on cylinder.
6
3
7
Remove pump from
box and disassemble
then wash, rinse,
and sanitize all parts
properly before use.
1
Server Eco Pump™
Tips and tricks to help you get started with your new Eco Pump™.
QUICK START GUIDE
© 2022 Server Products, Inc. 100732RevA
WANT TO LEARN MORE?
Visit server-products.com/manual-more for your
manual, part breakdown, support videos and more.
[email protected] | 800.558.8722
MODEL
XXXX
P/N
#####
SERIES
##X ##X
REFERENCE YOUR PART NUMBER
(P/N) LOCATED ON THE LID OR BASE.
SNAP!
READY
/