Ranger design 6550-FTS Installation guide

Brand
Ranger design
Model
6550-FTS
Category
Wall & ceiling mounts accessories
Type
Installation guide

Ranger Design 6550-FTS, the ultimate storage solution for your Ford Transit 130" WB, Driver Side, Medium Roof van. With its durable construction and easy installation, this track system provides a secure and versatile storage option for all your tools and equipment. The kit includes two mounting tracks, end caps, and all necessary hardware for a quick and hassle-free setup. Whether you're a contractor, delivery driver, or outdoor enthusiast, the 6550-FTS allows you to customize your van's storage space to fit your specific needs.

Ranger Design 6550-FTS, the ultimate storage solution for your Ford Transit 130" WB, Driver Side, Medium Roof van. With its durable construction and easy installation, this track system provides a secure and versatile storage option for all your tools and equipment. The kit includes two mounting tracks, end caps, and all necessary hardware for a quick and hassle-free setup. Whether you're a contractor, delivery driver, or outdoor enthusiast, the 6550-FTS allows you to customize your van's storage space to fit your specific needs.

INSTALLATION GUIDE
6550-FTS Install Track Kit
Ford Transit 130" WB, Driver Side
Medium Roof
QUICK START GUIDE
REQUIRED ITEMS
1
PERSON
q 1.1 Setup............................................................................................................................................... 3 - 4
Phase 1 - Assembly
Phase 2 - Installation
5 - 6
7
q Cordless Impact
q Cordless Drill
q 1/4" Plusnut Gun or Plusnut Tools
q 3/8" Drill Bit
q 7/16" Socket
q 13mm Socket
q Tape Measure
q Marker
q 2.1 Mounting Track Installation............................................................................................................
q 2.2 New Shelving Installation w/ Install Track Kit.................................................................................
For technical support, contact us at 1-800-565-5321 6550-FTS Installation Guide | REV. C2 | Page 3
PHASE 1 – ASSEMBLY
1.1 SETUP
1.1.1 Unpack components; compare with the bill of materials.
1.1.2 Verify all parts are present.
Item No. Description Qty.
70 - 612 Mounting Track 56.5" 2
70 - 611 Mounting Track 47.5" 2
10 - 557 End Cap 8
96 - 6025 Customer Fastener Kit 1
BILL OF MATERIALS
70-612
70-611
10-557
For technical support, contact us at 1-800-565-5321 6550-FTS Installation Guide | REV. C2 | Page 4
FOR SHELVING INSTALL
96-6025 Fastener Kit Fastener Assembly
1.1.3 Fastener kits.
4×4× Hex Bolt
M8 - 1.25 × 30mm
# 90-974
# 98-116
4×4×
Flat Washer
5/16" × 18
ZINC
4×4×
Lock Washer
5/16"
ZINC
# 98-122
11×11× # 98-112
Flat Washer
1/4", 3/4" OD
ZINC
11×11× Plusnut .250
# 94-130
11×11× # 98-118
Lock Washer
Regular 1/4"
ZINC
11×11× # 90-114
Hex Bolt
1/4"-20 × 1"
GR-5 ZINC 4× 4× for oem threaded holefor oem threaded hole
#90-974 Hex Bolt M8 × 30mm
#98-122 Lock Washer
#98-116 Flat Washer
11× 11× for plusnutfor plusnut
#90-114 Hex Bolt 1/4" × 1"
#98-118 Lock Washer
#98-112 Flat Washer
#94-130 Plus nut
16×16× # 94-150 Channel Nut
5/16"
#94-150 Channel Nut
16×16×
16×16× Hex Bolt
5/16"-18 × 1"
GR-5 ZINC
# 90-208
#90-208 Hex Bolt 5/16" × 1"
For technical support, contact us at 1-800-565-5321 6550-FTS Installation Guide | REV. C2 | Page 5
END CAP
END CAP
MOUNTING TRACK
1.2.1 Attach one end cap on each side of the mounting tracks.
PHASE 2 – INSTALLATION
2.1 MOUNTING TARCK INSTALLATION
4×4×
For technical support, contact us at 1-800-565-5321 6550-FTS Installation Guide | REV. C2 | Page 6
1.2.2 • Place the mounting tracks in the van, then mark the holes that need to used to van.
• Attach plusnut to the van, then install the mounting track.
PLUSNUT OEM THREADED OEM THREADED
OEM THREADEDOEM THREADED
PLUSNUT
PLUSNUT
PLUSNUT
PLUSNUT PLUSNUT PLUSNUT PLUSNUT
PLUSNUT PLUSNUT PLUSNUT
TOP REAR
BOTTOM REAR
TOP FRONT
BOTTOM FRONT
REAR
REAR
REAR
REAR
FRONT
FRONT
FRONT
FRONT
For technical support, contact us at 1-800-565-5321 6550-FTS Installation Guide | REV. C2 | Page 7
2.2.1 Aligned the wall brackets to the wall mounting track kits, then install the wall brackets
to the wall mounting track kits using channel nuts.
IMPORTANT: After installation is completed, ensure all bolts are tightened.
NOTE: Tightened the bolts that used to attached the wall bracket to the wall or wall kits 1st
before the bolts that used to attached the wall bracket to the end panel.
TOOLS
q Cordless Impact
q 1/2" Socket
FASTENERS USED
8× wall kits fastener kit
#90-208 Hex Bolt 5/16" × 1"
#98-122 Lock Washer
#98-116 Flat Washer
#94-150 Channel Nut
PHASE 2 – INSTALLATION
2.2 NEW SHELVING INSTALLATION W/ INSTALL TRACK KIT
For technical support, contact us at 1-800-565-5321 6550-FTS Installation Guide | REV. C2 | Page 8
“You have successfully installed your
6550-FTS
Thank you for doing business with us.”
For any feedback or suggestions you may have, please contact: cs@rangerdesign.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Ranger design 6550-FTS Installation guide

Brand
Ranger design
Model
6550-FTS
Category
Wall & ceiling mounts accessories
Type
Installation guide

Ranger Design 6550-FTS, the ultimate storage solution for your Ford Transit 130" WB, Driver Side, Medium Roof van. With its durable construction and easy installation, this track system provides a secure and versatile storage option for all your tools and equipment. The kit includes two mounting tracks, end caps, and all necessary hardware for a quick and hassle-free setup. Whether you're a contractor, delivery driver, or outdoor enthusiast, the 6550-FTS allows you to customize your van's storage space to fit your specific needs.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents