6555-FTL

Ranger design 6555-FTL Installation guide

  • Hello! I have reviewed the Installation Guide for the Ranger Design 6555-FTL Install Track Kit. This document provides a complete walkthrough for assembling and installing the track kit, which is designed for the passenger side of a Ford Transit. The guide includes instructions for mounting the tracks, attaching end caps, installing plusnuts, and finally using the track kit to install shelving. I am ready to answer any specific questions you might have about the installation process, tools or fasteners mentioned in the guide.
  • What tools are required for the installation?
    What is included in the fastener kit?
    What kind of vehicle is this kit designed for?
    What should be done after the installation is completed?
INSTALLATION GUIDE
6555-FTL Install Track Kit
Ford Transit, Passenger Side
QUICK START GUIDE
REQUIRED ITEMS
1
PERSON
q 1.1 Setup............................................................................................................................................... 3 - 4
Phase 1 - Assembly
Phase 2 - Installation
5 - 6
7
q Cordless Impact
q Cordless Drill
q 1/4" Plusnut Gun or Plusnut Tools
q 3/8" Drill Bit
q 7/16" Socket
q 13mm Socket
q Tape Measure
q Marker
q 2.1 Mounting Track Installation............................................................................................................
q 2.2 New Shelving Installation w/ Install Track Kit.................................................................................
For technical support, contact us at 1-800-565-5321 6555-FTL Installation Guide | REV. C1 | Page 3
PHASE 1 – ASSEMBLY
1.1 SETUP
1.1.1 Unpack components; compare with the bill of materials.
1.1.2 Verify all parts are present.
Item No. Description Qty.
70 - 622 Mounting Track 74" 2
10 - 557 End Cap 4
96 - 6028 Customer Fastener Kit 1
BILL OF MATERIALS
70-622
10-557
For technical support, contact us at 1-800-565-5321 6555-FTL Installation Guide | REV. C1 | Page 4
FOR SHELVING INSTALL
96-6028 Fastener Kit Fastener Assembly
1.1.3 Fastener kits.
Hex Bolt
M8 - 1.25 × 30mm
# 90-974
# 98-116
Flat Washer
5/16" × 18
ZINC
Lock Washer
5/16"
ZINC
# 98-122
# 98-112
Flat Washer
1/4", 3/4" OD
ZINC
Plusnut .250
# 94-130
# 98-118
Lock Washer
Regular 1/4"
ZINC
# 90-114
Hex Bolt
1/4"-20 × 1"
GR-5 ZINC for oem threaded holefor oem threaded hole
#90-974 Hex Bolt M8 × 30mm
#98-122 Lock Washer
#98-116 Flat Washer
for plusnutfor plusnut
#90-114 Hex Bolt 1/4" × 1"
#98-118 Lock Washer
#98-112 Flat Washer
#94-130 Plusnut
# 94-150 Channel Nut
5/16"
Hex Bolt
5/16"-18 × 1"
GR-5 ZINC
# 90-208
#94-150 Channel Nut
#90-208 Hex Bolt 5/16" × 1"
For technical support, contact us at 1-800-565-5321 6555-FTL Installation Guide | REV. C1 | Page 5
END CAP
END CAP
MOUNTING TRACK
1.2.1 Attach one end cap on each side of the mounting tracks.
PHASE 2 – INSTALLATION
2.1 MOUNTING TARCK INSTALLATION
For technical support, contact us at 1-800-565-5321 6555-FTL Installation Guide | REV. C1 | Page 6
PLUSNUT
PLUSNUT
OEM THREADED OEM THREADED OEM THREADED PLUSNUT
PLUSNUT PLUSNUTPLUSNUTPLUSNUT
TOP
BOTTOM
REAR
REAR
FRONT
FRONT
1.2.2 • Place the mounting tracks in the van, then mark the holes that need to the used to van.
• Drill the mark, then attach plusnut to the van.
• Install the mounting track after attaching the plusnut.
For technical support, contact us at 1-800-565-5321 6555-FTL Installation Guide | REV. C1 | Page 7
2.2.1 Aligned the wall brackets to the wall mounting track kits, then install the wall brackets
to the wall mounting track kits using channel nuts.
IMPORTANT: After installation is completed, ensure all bolts are tightened.
NOTE: Tightened the bolts that used to attached the wall bracket to the wall or wall kits 1st
before the bolts that used to attached the wall bracket to the end panel.
TOOLS
q Cordless Impact
q 1/2" Socket
FASTENERS USED
wall kits fastener kit
#90-208 Hex Bolt 5/16" × 1"
#98-122 Lock Washer
#98-116 Flat Washer
#94-150 Channel Nut
PHASE 2 – INSTALLATION
2.2 NEW SHELVING INSTALLATION W/ INSTALL TRACK KIT
For technical support, contact us at 1-800-565-5321 6555-FTL Installation Guide | REV. C1 | Page 8
You have successfully installed your
6555-FTL
Thank you for doing business with us.
For any feedback or suggestions you may have, please contact: cs@rangerdesign.com
/