Ranger design 6555-FTS Installation guide

Brand
Ranger design
Model
6555-FTS
Category
Wall & ceiling mounts accessories
Type
Installation guide
INSTALLATION GUIDE
6555-FTS Install Track Kit
Ford Transit 130" WB, Passenger Side
QUICK START GUIDE
REQUIRED ITEMS
1
PERSON
q 1.1 Setup............................................................................................................................................... 3 - 4
Phase 1 - Assembly
Phase 2 - Installation
5 - 6
7
q Cordless Impact
q Cordless Drill
q 1/4" Plusnut Gun or Plusnut Tools
q 3/8" Drill Bit
q 7/16" Socket
q 13mm Socket
q Tape Measure
q Marker
q 2.1 Mounting Track Installation............................................................................................................
q 2.2 New Shelving Installation w/ Install Track Kit.................................................................................
For technical support, contact us at 1-800-565-5321 6555-FTS Installation Guide | REV. C1 | Page 3
PHASE 1 – ASSEMBLY
1.1 SETUP
1.1.1 Unpack components; compare with the bill of materials.
1.1.2 Verify all parts are present.
Item No. Description Qty.
70 - 612 Mounting Track 56.5" 2
10 - 557 End Cap 4
96 - 6026 Customer Fastener Kit 1
BILL OF MATERIALS
70-612
10-557
For technical support, contact us at 1-800-565-5321 6555-FTS Installation Guide | REV. C1 | Page 4
FOR SHELVING INSTALL
96-6026 Fastener Kit Fastener Assembly
1.1.3 Fastener kits.
2×2×
6×6×
6×6×
6×6×
6×6×
Hex Bolt
M8 - 1.25 × 30mm
# 90-974
# 98-116
2×2×
Flat Washer
5/16" × 18
ZINC
2×2×
Lock Washer
5/16"
ZINC
# 98-122
# 98-112
Flat Washer
1/4", 3/4" OD
ZINC
Plusnut .250
# 94-130
# 98-118
Lock Washer
Regular 1/4"
ZINC
# 90-114
Hex Bolt
1/4"-20 × 1"
GR-5 ZINC 2× 2× for oem threaded holefor oem threaded hole
#90-974 Hex Bolt M8 × 30mm
#98-122 Lock Washer
#98-116 Flat Washer
6× 6× for plusnutfor plusnut
#90-114 Hex Bolt 1/4" × 1"
#98-118 Lock Washer
#98-112 Flat Washer
#94-130 Plusnut
8×8× # 94-150 Channel Nut
5/16"
8×8× Hex Bolt
5/16"-18 × 1"
GR-5 ZINC
# 90-208
#94-150 Channel Nut
8×8×
#90-208 Hex Bolt 5/16" × 1"
For technical support, contact us at 1-800-565-5321 6555-FTS Installation Guide | REV. C1 | Page 5
END CAP
END CAP
MOUNTING TRACK
1.2.1 Attach one end cap on each side of the mounting tracks.
PHASE 2 – INSTALLATION
2.1 MOUNTING TARCK INSTALLATION
2×2×
For technical support, contact us at 1-800-565-5321 6555-FTS Installation Guide | REV. C1 | Page 6
PLUSNUT
PLUSNUT
OEM THREADED OEM THREADED PLUSNUT
PLUSNUTPLUSNUTPLUSNUT
TOP
BOTTOM
REAR
REAR
FRONT
FRONT
1.2.2 • Place the mounting tracks in the van, then mark the holes that need to the used to van.
• Drill the mark, then attach plusnut to the van.
• Install the mounting track after attaching the plusnut.
For technical support, contact us at 1-800-565-5321 6555-FTS Installation Guide | REV. C1 | Page 7
2.2.1 Aligned the wall brackets to the wall mounting track kits, then install the wall brackets
to the wall mounting track kits using channel nuts.
IMPORTANT: After installation is completed, ensure all bolts are tightened.
NOTE: Tightened the bolts that used to attached the wall bracket to the wall or wall kits 1st
before the bolts that used to attached the wall bracket to the end panel.
TOOLS
q Cordless Impact
q 1/2" Socket
FASTENERS USED
8× wall kits fastener kit
#90-208 Hex Bolt 5/16" × 1"
#98-122 Lock Washer
#98-116 Flat Washer
#94-150 Channel Nut
PHASE 2 – INSTALLATION
2.2 NEW SHELVING INSTALLATION W/ INSTALL TRACK KIT
For technical support, contact us at 1-800-565-5321 6555-FTS Installation Guide | REV. C1 | Page 8
“You have successfully installed your
6555-FTS
Thank you for doing business with us.”
For any feedback or suggestions you may have, please contact: cs@rangerdesign.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Ranger design 6555-FTS Installation guide

Brand
Ranger design
Model
6555-FTS
Category
Wall & ceiling mounts accessories
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents