Ranger design 6550-PC Installation guide

Brand
Ranger design
Model
6550-PC
Category
Wall & ceiling mounts accessories
Type
Installation guide
INSTALLATION GUIDE
6550-PC Install Track Kit
Promaster City, Both Sides
QUICK START GUIDE
REQUIRED ITEMS
1
PERSON
q 1.1 Setup............................................................................................................................................... 3 - 4
Phase 1 - Assembly
Phase 2 - Installation
5 - 6
7
q Cordless Impact
q Cordless Drill
q 1/4" Plusnut Gun or Plusnut Tools
q 3/8" Drill Bit
q 7/16" Socket
q 13mm Socket
q Tape Measure
q Marker
q 2.1 Mounting Track Installation............................................................................................................
q 2.2 New Shelving Installation w/ Install Track Kit.................................................................................
For technical support, contact us at 1-800-565-5321 6550-PC Installation Guide | REV. B1 | Page 3
PHASE 1 – ASSEMBLY
1.1 SETUP
1.1.1 Unpack components; compare with the bill of materials.
1.1.2 Verify all parts are present.
BILL OF MATERIALS
40-010
40-011
Item No. Description Qty.
70-630 Mounting Track, 32’ long 1
40-010 Left Bracket, Install Kits, Promaster City 1
40-011 Right Bracket, Install Kits, Promaster City 1
96 - 6024 Customer Fastener Kit 1
70-630
For technical support, contact us at 1-800-565-5321 6550-PC Installation Guide | REV. B1 | Page 4
FOR SHELVING INSTALL
96-6024 Fastener Kit Fastener Assembly
1.1.3 Fastener kits.
4×4× # 98-112
Flat Washer
1/4", 3/4" OD
ZINC
4×4× Plusnut .250
# 94-130
4×4× # 98-118
Lock Washer
Regular 1/4"
ZINC
4×4× # 90-118
Hex Bolt
1/4"-20 × 1-1/4"
GR-5 ZINC
4× 4× for plusnutfor plusnut
#90-118 Hex Bolt 1/4" × 1-1/4"
#98-118 Lock Washer
#98-112 Flat Washer
#94-130 Plus nut
4×4× # 94-150 Channel Nut
5/16"
4×4× Hex Bolt
5/16"-18 × 1"
GR-5 ZINC
# 90-208
#94-150 Channel Nut
4×4×
#90-208 Hex Bolt 5/16" × 1"
For technical support, contact us at 1-800-565-5321 6550-PC Installation Guide | REV. B1 | Page 5
1.2.1 Attach one end cap on each side of the mounting tracks.
PHASE 2 – INSTALLATION
2.1 MOUNTING TARCK INSTALLATION
1×1×
LEFT BRACKET
RIGHT BRACKET
MOUNTING TRACK
For technical support, contact us at 1-800-565-5321 6550-PC Installation Guide | REV. B1 | Page 6
1.2.2 • Place the mounting tracks in the van, then mark the holes that need to used to van.
• Attach plusnut to the van, then install the mounting track.
MOUNTING TRACK
RIGHT BRACKET
PLUSNUT PLUSNUT
PLUSNUTPLUSNUT
For technical support, contact us at 1-800-565-5321 6550-PC Installation Guide | REV. B1 | Page 7
2.2.1 Aligned the wall brackets to the wall mounting track kits, then install the wall brackets
to the wall mounting track kits using channel nuts.
IMPORTANT: After installation is completed, ensure all bolts are tightened.
NOTE: Tightened the bolts that used to attached the wall bracket to the wall or wall kits 1st
before the bolts that used to attached the wall bracket to the end panel.
TOOLS
q Cordless Impact
q 1/2" Socket
FASTENERS USED
4× wall kits fastener kit
#90-208 Hex Bolt 5/16" × 1"
#98-122 Lock Washer
#98-116 Flat Washer
#94-150 Channel Nut
PHASE 2 – INSTALLATION
2.2 NEW SHELVING INSTALLATION W/ INSTALL TRACK KIT
For technical support, contact us at 1-800-565-5321 6550-PC Installation Guide | REV. B1 | Page 8
“You have successfully installed your
6550-PC
Thank you for doing business with us.”
For any feedback or suggestions you may have, please contact: [email protected]om
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Ranger design 6550-PC Installation guide

Brand
Ranger design
Model
6550-PC
Category
Wall & ceiling mounts accessories
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents