Diebold Nixdorf BEETLE M1350 Operating instructions

BEETLE M1350

Operator Manual

01750349439 B

Public

This document is property of Diebold Nixdorf and is intended for customer use. A written license

agreement with Diebold Nixdorf is not required to use this material.

This document contains proprietary information of Diebold Nixdorf, Incorporated or its subsidiaries (col-

lectively “Diebold Nixdorf“) and may include information that is protected by copyright, trademark and

patent laws in the US, Germany, and globally. All rights, including rights created by patent grants or reg-

istration of a utility model or design, are reserved.

No part of this document may be translated, reproduced, stored in a retrieval system, or transmit-

ted, in any form or by any means: electronic, mechanical, photocopying, recording, or otherwise,

without prior written permission from Diebold Nixdorf. Any violations of the foregoing may give

rise to a claim for damages.

If the document pages state the information is confidential (or words of similar import), then this

document is intended solely for the use of the employees or other personnel of Diebold Nixdorf

unless expressly authorized in writing by Diebold Nixdorf. Other uses of this information without

the express written consent of Diebold Nixdorf are prohibited.

This document should be treated as confidential material for security reasons. Any unauthorized

disclosure or use of confidential material may violate the U.S. Theft of Trade Secrets provisions

of Section 1832 of Title 18 of the United States Code as well as comparable laws in other jurisdic-

tions throughout the world, and may be punishable by fine and imprisonment.

This document and the information contained herein are provided AS IS AND WITHOUT WARRANTY.

In no event shall Diebold Nixdorf or its suppliers be liable for any special, indirect, or consequential dam-

ages of any nature resulting from the use of information in this manual. The information contained in this

document is subject to change without notice. When using the document for system implementation,

please call your authorized Diebold Nixdorf sales or service representative for any applicable changes.

Any trademarks, service marks, product names or company names not owned by Diebold Nixdorf, that

appear in this document are used for informational purposes only, and Diebold Nixdorf claims no rights

thereto, nor does such use indicate any affiliation with or any endorsement of Diebold Nixdorf or Diebold

Nixdorf products by the owners thereof.

Your use of this document and/or any of the information contained herein constitutes your agreement to

all of the terms stated on this page.

01750349439 B

ii

Table-1: Document History

Material Number Date Remarks

01750349439 A 12/2021 Original edition including TSE description

01750349439 B 02/2022 Corrected TSE function

01750349439 B

iii

Table of Contents

1 Introduction ................................................................................................................................ 1-1

1.1 About this manual ..............................................................................................................1-1

1.2 Signs, markings and symbols ............................................................................................1-2

2 Safety .......................................................................................................................................... 2-1

2.1 General safety instructions for the component...................................................................2-1

2.2 ESD (Electrostatic Sensitive Devices) ...............................................................................2-2

3 Basic Settings ............................................................................................................................ 3-1

4 Overview ..................................................................................................................................... 4-1

4.1 ID Plates and Serial Numbers............................................................................................4-1

4.2 Front View ..........................................................................................................................4-3

4.3 Back View ..........................................................................................................................4-4

4.4 Top View ............................................................................................................................4-5

4.5 Inside View.........................................................................................................................4-6

4.6 AC Power Adapter .............................................................................................................4-7

5 Connecting/Disconnecting Cables........................................................................................... 5-1

6 Storage Media ............................................................................................................................ 6-1

6.1 Replacement of Solid State Disk (SSD).............................................................................6-2

6.2 Replacement of the RAM ...................................................................................................6-3

7 Technical Security Device (TSE) .............................................................................................. 7-1

8 Installation .................................................................................................................................. 8-1

8.1 The Tools You Need ..........................................................................................................8-1

8.2 Required Space .................................................................................................................8-2

8.3 Mounting Steps for Optional Wall Plate .............................................................................8-3

9 Replacement of the Lithium Battery ........................................................................................ 9-1

10 Starting Up the System ............................................................................................................. 10-1

11 POST Code ................................................................................................................................. 11-1

12 Technical Data............................................................................................................................ 12-1

12.1 BEETLE M1350 .................................................................................................................12-1

12.2 AC Power Adapter .............................................................................................................12-2

12.3 Total Available Power ........................................................................................................12-3

13 Certifications of the Manufacturer ........................................................................................... 13-1

14 Disposal ...................................................................................................................................... 14-1

01750349439 B

iv

Table of Contents

List of Figures

Figure 4-1 Position of plates....................................................................................................4-1

Figure 4-2 Type plate...............................................................................................................4-2

Figure 4-3 Service plate...........................................................................................................4-2

Figure 4-4 FCC plate ...............................................................................................................4-2

Figure 4-5 BEETLE M1350 Front View ...................................................................................4-3

Figure 4-6 BEETLE M1350 Back View....................................................................................4-4

Figure 4-7 BEETLE M1350 Top View......................................................................................4-5

Figure 4-8 BEETLE M1350 Inside View ..................................................................................4-6

Figure 4-9 AC power adapter ..................................................................................................4-7

Figure 5-1 USB-C connector ...................................................................................................5-1

Figure 5-2 4 pin power plug.....................................................................................................5-2

Figure 5-3 RJ plug ...................................................................................................................5-2

Figure 5-4 USB plug ................................................................................................................5-3

Figure 6-1 Removing the screws from the housing .................................................................6-1

Figure 6-2 Removing the cover upwards.................................................................................6-1

Figure 6-3 Removing the SSD.................................................................................................6-2

Figure 6-4 Replacing the SSD.................................................................................................6-2

Figure 6-5 Removing the RAM ................................................................................................6-3

Figure 6-6 Replacing the RAM ................................................................................................6-3

Figure 7-1 Preparing the Beetle for the TSE module...............................................................7-1

Figure 7-2 Unlocking the cover................................................................................................7-2

Figure 7-3 Inserting the SD card..............................................................................................7-2

Figure 7-4 Pre-assembling the TSE module............................................................................7-3

Figure 7-5 Inserting the TSE module.......................................................................................7-3

Figure 7-6 Fixing the TSE module...........................................................................................7-4

Figure 8-1 Mounting Options ...................................................................................................8-2

Figure 8-2 Mounting the back plate .........................................................................................8-3

Figure 8-3 Hooking the device.................................................................................................8-3

Figure 8-4 Fixing the device ....................................................................................................8-4

01750349439 B

v

Table of Contents

List of Tables

Table -1 Document History...................................................................................................-iii

Table 1-1 Warning signs used................................................................................................1-2

Table 4-1 Front Panel Functions ............................................................................................4-3

Table 12-1 Technical Data BEETLE M1350.............................................................................12-1

Table 12-2 AC Power Adapter..................................................................................................12-2

Table 12-3 Total available power .............................................................................................12-3

01750349439 B

vi

1

1 Introduction

1.1

1.1 About this manual

This documentation is intended to help you to work with the BEETLE M1350 system and to serve as a

reference work. The detailed table of contents will help you find the desired information quickly and eas-

ily.

WARNING

This symbol is used for warnings.

NOTE

Notes in this manual are marked by this symbol.

The type and scope of application programs depend on the customer’s own selection; therefore, soft-

ware will not be discussed further in this manual.

01750349439 B

1-1

Introduction

1.2

1.2 Signs, markings and symbols

The following designations can be used in this manual or on the device.

Table1-1: Warning signs used

Warning signs

General information

Warning signs

Warning of

electrical voltage

Warning of

hot surface

01750349439 B

1-2

2

2 Safety

2.1

2.1 General safety instructions for the component

NOTE

Read this entire manual carefully in order to obtain a thorough knowledge with respect

to the system and the components, in addition to their operation and maintenance.

Operate the system and the components correctly in accordance with this manual in or-

der to avoid injuries and damage.

Keep this manual available and consult it for guidance when you are unsure about how

to carry out one or another of the procedures.

DANGER

Electrical voltage

Risk of fatal injury through contact with parts carrying electrical voltage! Switch the sys-

tem off before performing any cleaning or maintenance tasks.

lSwitch off the power switch for the power distributor.

lDisconnect the mains connection.

lDisconnect the connector of the power supply cable from the electrical socket in-

stalled by the building contractor.

DANGER

Repairs

Repair work on the system or on the components may be carried out only by authorized

specialist staff. Unauthorized opening of the system or repair work carried out improp-

erly could result in considerable danger to the user.

In case of noncompliance, Diebold Nixdorf excludes all liability.

01750349439 B

2-1

Safety

2.2

2.2 ESD (Electrostatic Sensitive Devices)

Components containing electrostatic sensitive devices (ESDs) may be identified by this

label.

When installing a module or drive, please follow the following instructions, which pertain to all electro-

static sensitive devices (ESDs):

• Always use the antistatic kit.

• Statically discharge yourself, for example by touching an earthed object (such as a heat radiator) be-

fore beginning to work with ESD-labelled components.

• Likewise, all equipment and tools used in working with such components must be free of static

charge.

• Pull the mains plug before inserting or removing such components.

• Only handle such components by their edges.

• Never touch any terminal pins of the strip conductors on such components.

01750349439 B

2-2

3

3 Basic Settings

Components

The BEETLE M1350 comes with a 15W of the following processor options with configurable memory and

SSD options.

Processor Type

Whiskey Lake 15W Processor Options:

• Celeron 4305UE

• Core i3-8145UE

• Core i5-8365UE

Memory Options

• DDR4 1866/2133/2400 MT/s SODIMM up to 32 GB

M.2 SSD Options

• 128 GB

• 256 GB

• 512 GB

• 1 TB

01750349439 B

3-1

4

4 Overview

4.1

4.1 ID Plates and Serial Numbers

Figure4-1: Position of plates

1FCC plate 2Type plate

3Service plate

01750349439 B

4-1

Overview

Figure4-2: Type plate

Example for type plate

Figure4-3: Service plate

Example for service plate

Figure4-4: FCC plate

Example for FCC plate

01750349439 B

4-2

Overview

4.2

4.2 Front View

Figure4-5: BEETLE M1350 Front View

1Power Button 2Power LED

3USB 2.0 4Activity LED

Table4-1: Front Panel Functions

Designation Specification

Power Button Single Press: On/Off

Power LED The Power LED lights orange when the system has been shut down and is

in power mode S5. During shutdown, it takes a few seconds before the

color change occurs.

The Power LED lights green when the system is on and running (S0) or

flashes green when the system is in the "Energy Saving" mode (S3, S4).

Acitivity Indicator LED Off: No activity

LED yellow blinking: Activity is configured in BIOS

01750349439 B

4-3

Overview

4.3

4.3 Back View

Figure4-6: BEETLE M1350 Back View

1LAN 2COM 1

3COM 2 4USB 2.0

5USB 3.1 6Power in DC 24V

7Cash drawer 8USB type C PD 5/12/24V, DP

9USB type C PD 5/12V, DP

01750349439 B

4-4

Overview

4.4

4.4 Top View

CAUTION

Risk of burns due to hot surface

The device heats up during operation.

Touching the hot surface can cause burns.

lWait until the surface has cooled down.

lWear protective gloves.

Figure4-7: BEETLE M1350 Top View

1Heat Sink

01750349439 B

4-5

Overview

4.5

4.5 Inside View

Figure4-8: BEETLE M1350 Inside View

1SODIMM socket 2M.2 2280 socket

3M.2 2280 socket

01750349439 B

4-6

Overview

4.6

4.6 AC Power Adapter

Figure4-9: AC power adapter

1DC power out 2Power indicator

3AC power adapter 4AC power plug

The external power supply is applicable for common line voltage.

It automatically adjusts itself to the particular voltage.

01750349439 B

4-7

5

5 Connecting/Disconnecting Cables

Connecting cables

The installation of the system should be performed in the following order:

• Plug all data communication cables and fix them.

• Connect the power supply unit via a DC cable with the BEETLE M1350.

• Connect the power cord of the power supply unit with the surge protector sockets of the housing in-

stallation.

Disconnecting cables

Never unplug a cable by pulling on the cable; always take direct hold of the plug itself. Follow the proce-

dure below when disconnecting cables:

• Turn off all power and equipment switches.

• Remove the cable cover.

• Unplug all power plugs from the grounded-contact power sockets.

• Unplug all data communication cables from the sockets of the data networks.

• Unplug all cables from the devices.

NOTE

Never connect data cables when the system is switched on.

Figure5-1: USB-C connector

• Manually tighten or loosen the knurled thumb

screw of the USB-C connector.

01750349439 B

5-1

Connecting/Disconnecting Cables

Figure5-2: 4 pin power plug

• With 4 pin power plugs, the plug remains in-

serted until released.

• Pull the plastic covering from the connecting

socket with your thumb.

• The lock is released. The metal of the plug is

visible.

Figure5-3: RJ plug

• RJ plugs lock in place when plugged in.

• To release a RJ plug push down the latch.

01750349439 B

5-2

Page is loading ...

Diebold Nixdorf BEETLE M1350 Operating instructions

Diebold Nixdorf BEETLE M1350 Operating instructions

Related papers

Other documents