Kodak CHERISH C520 User manual

Type
User manual

This manual is also suitable for

Kodak CHERISH C520 is a feature-rich home monitor that lets you keep an eye on your little one from anywhere. With its Wi-Fi connectivity and smartphone app, you can access live video, two-way audio, and even receive motion and sound alerts right on your phone. The camera also features night vision, temperature and humidity sensors, and lullabies to help soothe your baby to sleep. And with the large 5-inch display and crystal-clear video, you'll never miss a moment.

Kodak CHERISH C520 is a feature-rich home monitor that lets you keep an eye on your little one from anywhere. With its Wi-Fi connectivity and smartphone app, you can access live video, two-way audio, and even receive motion and sound alerts right on your phone. The camera also features night vision, temperature and humidity sensors, and lullabies to help soothe your baby to sleep. And with the large 5-inch display and crystal-clear video, you'll never miss a moment.

Page | 2 Introduction
1 x Power adapter for
Home Unit
1 x Home Unit(Camera)
WELCOME ASSEMBLY
Thank you for buying the KODAK CHERISH F680
Battery Operated Wi-Fi Home Monitor.
With your mobile device, now you can monitor your
baby sleeping in another room anywhere, anytime!
Please keep your original dated sales receipt. You will
need to produce a copy of your dated sales receipt to
conirm warranty status.
For product-related questions, please send an email
to: support@kodaksmarthome.com.
This User’s Guide covers all the information you’ll need
to get the most from your product.
Prior to using the Home Monitor, we recommend that
you fully charge the battery. This way, the device will
continue to work even if you disconnect it from the
power supply to carry it to another location. Please
read the Safety Instructions on page 12 carefully
before installation.
Check List:
Page | 4 Home Unit Overview
HOME UNIT OVERVIEW
1. Camera Lens
2. IR Lens
3. Microphone
4. Pair Button
5. SD Card Cover
6. Lens Frame
7. LED Power Indicator
8. Power ON/OFF Switch
9. Speaker
10. Charging Socket
11. Ball Joint Arm
12. Thermometer and
humidity sensor
13. Battery Door
7
6
10
12
13
11
8
4
5
1
2
3
9
Page | 6 Behaviors for Home Unit
Camera is OFF, battery is charging: Solid Red
Camera powering up: Solid Blue for irst few seconds
Camera locating router: Blue blinking every one second
Camera connected to router: Solid Blue
Camera in pair mode: Blinking Blue & Red
Firmware upgrading. DO NOT SWITCH OFF THE CAMERA:
Blinking Purple, Red & Blue
Camera is OFF, battery is fully charged: No Light
LED Behaviors for Home Unit
Page | 8 Guidelines to Install Your Home Monitor
The signal strength may also be reduced by
other solid structures, like walls or electrical
equipment, such as radios, TVs, computers,
cordless or mobile phones, luorescent lights or
dimmer switches.
Use of other 2.4 GHz products, such as wireless
networks (Wi-Fi routers), Bluetooth systems, or
microwave ovens, may cause interference with
this product, so keep the Home Monitor at least
5 feet from these types of products, or turn them
o if they appear to be causing interference.
ESSENTIAL GUIDELINES FOR INSTALLING YOUR HOME MONITOR
If the signal is weak, try moving the Home
monitor to another position in the room.
Page | 10 Table of Contents
1. Safety Instructions
2. Getting Started
3. Using the Home Monitor
3.1 Setting Up
3.2 Power On or Off the Home Unit
4. Disposal of the Device (Environment)
5. Cleaning
6. Troubleshooting
7. “KODAK Smart Home” In-App Setup
TABLE OF CONTENTS
8. Monitoring Your Home Via App
9. Grant Access
10. Further Information
Exclusion
How to Obtain Warranty Service or Other
Information?
FCC, IC And CE Regulations
Warning
EC Declaration of Conformity
11. Technical Speciications
12
14
16
18
19
20
22
34
38
42
56
Page | 12 Safety Instruction
Strangulation Hazard: Children have STRANGLED in
cords.
Keep this cord out of the reach of children (more than 3ft
away). Do not remove this tag. NEVER use extension cords
with AC Adapters. Only use the AC Adapters provided.
Home Unit Set Up & Use:
Determine a location for the Home Unit that will
provide the best view of your monitoring area
Place the Home Unit on a lat surface, such as a
dresser, bureau, or shelf or mount the Unit to a wall
securely using the keyhole slots in the underside of
the stand.
NEVER place the Home Unit or cords within the cot.
This Home Monitor is compliant with all relevant standards
regarding electromagnetic ields and is, when handled
as described in the User’s Guide, safe to use. Therefore,
always read the instructions in this User’s Guide carefully
before using the device.
Adult assembly required. Keep small parts away from
children when assembling.
1. SAFETY INSTRUCTION
WARNING:
This product is not a toy. Do not allow children to
play with it.
This Home Monitor is not a substitute for responsible
adult supervision.
Keep this User’s Guide for future reference.
Do not place the Home Unit or cords in the cot or
within reach of the sound (the Unit and cords should
be more than 3 feet away).
Keep the cords out of reach of children.
Do not cover the Home Monitor with a towel or
blanket.
Test this monitor and all its functions so that you are
familiar with it prior to actual use.
Do not use the Home Monitor in damp areas or close
to water.
Only use the chargers and power adapters provided.
Do not use other chargers or power adapters as this
may damage the device and battery pack.
Only insert a battery pack of the same type.
Do not touch the plug contacts with sharp or metal
objects.
Connect the power adapters to easily accessible
electrical outlets.
CAUTION:
Risk of explosion if battery is replaced by an
incorrect type.
Dispose of used batteries according to their
instructions.
Page | 14 Getting Started
2. GETTING STARTED
1. Insert the small end (USB) of the Home Unit’s power
adapter (Output 5V, 1500mA) into the USB socket
in the back of the Home Unit.
2. Insert the other end of the power adapter into a
suitable electrical outlet.
3. Slide the ON/OFF switch to the ON position to
switch on the Home Unit. The power indicator
lights up in blue.
4. Slide the ON/OFF switch to the OFF position to
switch o the Home Unit. The power indicator
lights up in red, indicating that the battery is being
charged.
*IMPORTANT: Only use the supplied power
adapter.*
Home Unit Power Supply
Page | 16 Using the Home Monitor
3. USING THE HOME MONITOR
Make sure that the Home Unit is switched on.
Place the Home Unit in a convenient location (e.g.
on a table) and point the camera lens towards the
area you want to monitor.
NOTE:
Do not place the Home Unit within reach of a child
or baby! If there is interference with the picture or
sound, try moving the units to dierent locations,
and ensure that they are not close to any other
electrical equipment.
If you hear a high pitched noise. This is not a fault.
The unit is designed to be operated at some
distance apart. So move the units further apart.
It is recommended to use a Class 10 SD Card.
(Insert the SD card with the labels facing towards
you)
Slide the ON/OFF switch to the ON position to
switch on the Home Unit. The power indicator
lights up in blue.
Slide the ON/OFF switch to the OFF position to
switch o the Home Unit. The power indicator goes
o if the battery is not being charged, or lights up
in red if it is charging.
3.1 Setting Up 3.2 Power On or Off the Home Unit
Please read these instructions carefully, and be aware
that Home Monitor is only intended as an aid.
It is not a substitute for responsible adult supervision.
Page | 18 Disposal of The Device Cleaning
4. PROPER DISPOSAL OF THE DEVICE
When the product comes to the
end of its lifecycle, you should not
dispose of it with normal household
waste. Take the product to a
collection point for the recycling
of its electrical and electronic
components.
This is indicated by the symbol on the product,
User’s Guide and/or packaging.
Some of the product materials may be reused if you
take them to a recycling point. By reusing some parts
or raw materials from used products, you make a
signiicant contribution to environmental conservancy.
Please contact your local authorities if you required
any further information on the collection points in your
area.
Please dispose of the battery pack in an
environmentally-friendly manner in accordance with
your local regulations.
Wipe your Home Monitor with a slightly moistened or
anti-static cloth. Refrain from using cleaning agents or
abrasive solvents.
Cleaning and Maintenance
Never clean any part of the product with thinners
or other solvents and chemicals – this may result
in permanent damage to the product which is out
of the scope of coverage of the Warranty.
Make sure that your Home Monitor stays away
from hot, humid areas or conditions, strong
sunlight and avoid moisture.
We have made every eort to ensure that your
Home Monitor is highly reliable. Yet, if anything
goes wrong, please do not try to repair it yourself
– instead, contact our Customer Service for help.
Note:
Always turn o and disconnect the power adapter prior
to cleaning your Home Monitor.
5. CLEANING YOUR DEVICE
Page | 20 Troubleshooting
6. TROUBLESHOOTING
Power Indicator on the Home Unit does not turn on
Check whether the Home Unit is powered on.
Check whether the battery is charged.
Recharge the Home Unit by connecting it to the
power supply.
Page | 22 KODAK Smart Home
7. “KODAK SMART HOME” INAPP SETUP
To download the “KODAK Smart Home” app:
On your mobile device, visit the App Store
(iOS) or Google Play (Android)
Search for “KODAK Smart Home
Download and install the “KODAK Smart
Home” app on your mobile device
You can connect the Home Unit with your mobile
device. Read on for a step-by-step guide.
Step 1: Download the “KODAK Smart Home” App
Page | 24 KODAK Smart Home
If this is your irst KODAK Smart Home product,
you will be asked to create an account. To set up an
account:
On your mobile device, open the “KODAK Smart
Home” app
Tap SIGN UP
Follow the in-app instructions to create a new
account
Step 2: Create or Login to Your Account
If you already have another KODAK Smart Home
product installed, simply select LOGIN:
Page | 26 KODAK Smart Home
Having your Wi-Fi network name and password
handy, you will now pair your Home Monitor near your
wireless router with the “KODAK Smart Home” app:
Select Add new device…
Select Home Series > KODAK CHERISH F680
The app will then walk you through the setup
process
Step 3: Add the Home Monitor to Your App
Page | 28 KODAK Smart Home
In the middle of the setup process, you will be
required to get your KODAK CHERISH F680 Wi-Fi
Home Monitor into the setup mode. To do this:
Press and hold the Pair button for 3 seconds until
you hear a beep sound
You will then hear “Start Pairing Mode,” indicating
that the Home Unit has entered the setup mode.
You may now release the Pair button and tap
Continue on your mobile device
Step 4: Get Your Home Unit
(Camera) into the Setup Mode
For IOS devices, you will have to connect to the
cameras Wi-Fi through your Wi-Fi settings of your
phone.
To do this:
Tap the Go To Settings button to access to the
Wi-Fi settings on your phone
In the Wi-Fi settings of your phone, connect to
KodakCam-FXXXXXXXXX and return to the
app.
Step 4.1: Connect to the Cameras Wi-Fi
from Your Phone(For IOS Only)
Page | 30 KODAK Smart Home
Your Home Monitor should now start pairing with your
mobile device automatically:
You will hear “Setup Completed” when the Home
Monitor is successfully paired
You may choose one of the recommended names or
rename your Home Monitor by selecting Custom.
Step 5: Wait While Pairing is in Progress
Page | 32 KODAK Smart Home
The Home Monitor is now added to the Dashboard of
the “KODAK Smart Home” app:
You may now run a test
You should be able to see video from your Home
Monitor in the “KODAK Smart Home” app
Step 6: Test Your Home Monitor
Page | 34 KODAK Smart Home
8. MONITORING YOUR HOME VIA THE APP
When you turn on the Home Unit (Camera), if you
have not yet opened the “KODAK Smart Home
app, you’ll be alerted on your mobile device.
You may double-click on the window to view the
screen below:
You can pinch outwards to zoom in on the video
image, or pinch inwards to zoom out.
Page | 36 KODAK Smart Home
Menu
Click to open/close menu
Mute
Press this button to toggle
between mute/unmute
Talk
Press this button to talk to
your baby
Record a Video
Press this button to record
a video
Take a Photo
Press this button to take
a photo
Lullaby
Press this to play music to
your baby
Zoom in/out
Press this to zoom in/out
KODAK Smart Home Icons
You may also perform one or more of the following
actions by clicking on the MENU icon:
Dashboard
Tap here to return to the
“Home” screen
Video Gallery
Tap here to view your
recorded footage
Events
Tap here to check history
of your actions
Add New Device
Tap to add new device
Side Menu
Press this open/close the
side menu
Camera Settings
Tap to open and edit the
settings of a device
Hints
Tap to open hints on the
operations of the app
For additional help and further information about our products, visit
www.kodaksmarthome.com or email to support@kodaksmarthome.com.
Page | 38 KODAK Smart Home
9. GRANT ACCESS
You may grant access to your family and friends using
feature called “Grant Access” which is located on the
side menu of the Dashboard.
9.1 Add Friend
1. Click on “
which was
located on the
Dashboard
2. Select “Grant
Access” under
Device
3. Click on “
+
which is located
on the top right
4. Simply follow the
directions on the app
and click “Save” to
add friend
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30

Kodak CHERISH C520 User manual

Type
User manual
This manual is also suitable for

Kodak CHERISH C520 is a feature-rich home monitor that lets you keep an eye on your little one from anywhere. With its Wi-Fi connectivity and smartphone app, you can access live video, two-way audio, and even receive motion and sound alerts right on your phone. The camera also features night vision, temperature and humidity sensors, and lullabies to help soothe your baby to sleep. And with the large 5-inch display and crystal-clear video, you'll never miss a moment.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI