Highwood AD-CHL1-RED Installation guide

Type
Installation guide
A
For information on Care and Cleaning or to register your
highwood product, please visit www.highwood-usa.com.
PAGE 1 OF 2
INCLUDED TOOLS
5/32" HEX KEY
IMPORTANT!
DO NOT fully tighten the bolts until all
bolts are started. Once all bolts are inserted,
go back & tighten all the bolts.
Retain these instructions for future reference
HARDWARE
T-15 TORX BIT
high
wood
NATURE'S CLOSEST RIVAL
CUSTOMER-SUPPLIED TOOLS
Cordless screwdriver/drill OR
Multi-bit handle for the Torx bit.
Adirondack Collection
Hamilton Folding & Reclining Adirondack Chair
Assembly Guide
1) Attach Seat to Back using bolt C.
2) Repeat on other side.
AD-CHL1
08.07.2017
A
B
C
3) Attach Back Support Brace
(shorter piece) to Back Support Sides
with four A screws.
SEAT
BACK
x8
x2
x4
A
1/4"-20 x 3"
1/4"-20 x 2"
#7 x 1-5/8"
C
A
B
For information on Care and Cleaning or to register your
highwood product, please visit www.highwood-usa.com.
PAGE 2 OF 2
high
wood
NATURE'S CLOSEST RIVAL
Adirondack Collection
Hamilton Folding & Reclining Adirondack Chair
Assembly Guide
4) Attach Arm to Back using bolt C. Insert bolt from the Arm,
through the Back Support Side, and into the Back.
5) Repeat on other side.
AD-CHL1
08.07.2017
C
Board Faces Out
(From Step 3)
BACK
ARM
SEAT
SEAT
B
6) Turn chair over. Attach Seat to Leg using bolt B.
7) Repeat on other side.
A
8) Attach Front Leg Support with four
A screws. Enjoy your Highwood Chair!
IMPORTANT NOTE!
NEVER adjust the level of recline while you are sitting in the chair, or while
anyone else is in the chair. Always adjust with an empty chair and ensure that the
back-support is completely secure in the recline slots on each side of the chair.
To fold the chair, lift the back-support and gently push down on the back of
the chair. The chair will collapse down to floor level.
LEG
  • Page 1 1
  • Page 2 2

Highwood AD-CHL1-RED Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI