Hampton Bay FNV0116A Installation guide

Brand: Hampton Bay

Model: FNV0116A

Type: Installation guide

Hampton Bay FNV0116A is a transitional five-light outdoor wall fixture with clear seeded glass in a black finish. It provides a welcoming light for your outdoor space, and the seeded glass adds a touch of vintage charm. This fixture is also easy to install, making it a great choice for do-it-yourselfers. Here are some of the features of the Hampton Bay FNV0116A:

Durable construction: This fixture is made of high-quality materials, so you can be sure that it will last for years to come.
Weather-resistant: This fixture is designed to withstand the elements, so you can be sure that it will look great even after years of exposure to the sun, rain, and snow.

Durable construction: This fixture is made of high-quality materials, so you can be sure that it will last for years to come.
Weather-resistant: This fixture is designed to withstand the elements, so you can be sure that it will look great even after years of exposure to the sun, rain, and snow.

Page 1

INSTRUCTION MANUAL

6LT Interior Chandelier

Charleston collection

The Home Depot SKU 530-346 (UPC 6940500313719)

Page 2

Thank you for purchasing this Hampton Bay interior chandelier. This product

has been manufactured with the highest standards of safety and quality.

FEATURES:

1. Six-light interior chandelier in oil rubbed bronze finish with metal shades.

This chandelier is a part of the matching Charleston collection available at

The Home Depot.

2. Standard 72-inch wire and 60-inch chain for open entry-way and cathedral

ceiling installations. Also includes a Quick Link to easily adjust length of

chain.

3. This fixture has been engineered to safely use six 60 watt candelabra

incandescent light bulbs (do not exceed 60 watts each) (not included).

4. For energy savings, this fixture has been engineered to safely use six

candelabra compact fluorescent light bulbs (for equivalent light output, do

not exceed 15 watts each) (not included).

QUESTIONS, PROBLEMS, MISSING PARTS:

Before returning to your local The Home Depot, please call our Customer

Service Team at 1-877-527-0313 or visit www.homedepot.com. Please

reference your SKU 530-346 or UPC 6940500313719.

Page 3

CAUTION:

1. Before starting installation of this fixture or removal of a previous fixture,

disconnect the power by turning off the circuit breaker or by removing the

fuse at the fuse box.

2. CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY

ELECTRICAL QUESTIONS.

3. If you have any non-electrical questions about this fixture, please contact

our Customer Service Team at 1-877-527-0313 or visit

www.homedepot.com. Please reference your SKU 530-346 or UPC

6940500313719.

4. Keep your receipt and these Instructions for Proof of Purchase.

TOOLS REQUIRED FOR ASSEMBLY & INSTALLATION

(not included):

6 Light Bulbs Safety Goggles Ladder Gloves Wire strippers

(60 watt maximum)

(or CFL equivalent)

Flathead Screwdriver Phillips Screwdriver Electrical Tape Wire Cutters Pliers

Page 4

PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):

1ea

Canopy (#1) 1ea Screw Collar Loop (#2) 5 feet Chain (#3) 1ea Ring (#4) 1ea Loop (#5)

1ea Finial (#12) 6ea Cup (#14) 6ea Socket Sleeve (#15) 6ea Shade (#16) 1ea Quick Link (#25)

ASSEMBLY INSTRUCTIONS:

Carefully unpack the fixture. Lay out all parts on a clean surface. Evenly spread the fixture

arms to open the chandelier (see Fixture Distribution on Page 5).

2. Screw the Loop (#5) onto Nipple A (#6). Use the Quick Link (#25) to attach the Chain (#3)

to the Loop (#5).

3. Weave the fixture wires up through the Loop (#5), through the Chain (#3), through the

Ring (#4), through the Screw Collar Loop (#2), through the Canopy (#1), and through the

Nipple (#24 on Page 7) on the Mounting Strap (#23 on Page 7). Screw the Nipple (#24)

into the Screw Collar Loop (#2).

4. Screw the Finial (#12) onto Nipple B (#11). Place the Junction Cover (#8) over the Arms

(#10). Screw the Decorative Screw (#7) onto the Thread Rod (#9) to secure the Junction

Cover (#8) over the Arms (#10).

5. Place a Cup (#14), a Socket Sleeve (#15) and then a Shade (#16) over a Socket (#13).

Repeat for each Socket (#13).

6. Install six 60 watt candelabra incandescent light Bulbs (#17) (not included) or six

equivalent candelabra compact fluorescent light bulbs (not included) in the six Sockets

(#13) in the fixture.

Page is loading ...

Page 6

PARTS INCLUDED FOR INSTALLATION (parts are not to scale):

3ea Wire Connectors (#19) 1ea Ground Screw (#20) 2ea Outlet Box Screws (#21)

1ea Hex Nut (#22) 1ea Mounting Strap (#23) 1ea Nipple (#24)

INSTALLATION INSTRUCTIONS:

Screw the Nipple (#24) a half-inch into the Mounting Strap (#23). Tighten the Hex Nut (#22)

against the Mounting Strap (#23) to secure the Nipple (#24). Attach the Mounting Strap (#23)

to the Outlet Box (#18) using the two Outlet Box Screws (#21). [Make sure the longer end of

the Nipple (#24) with the Screw Collar Loop (#2) is facing outside when the Mounting Strap

(#23) is attached to the Outlet Box (#18).]

2. Adjust the Chain (#3) to required height by lifting the fixture and attaching the Quick Link

(#25) to the Loop (#5) and to a link of Chain (#3) closer to the ceiling. The fixture can be

raised and lowered in this manner until the desired height is achieved. Next, use pliers and

a screwdriver to twist open (cover the chain with cloth to prevent damage to the link finish)

the first unused link of Chain (#3). Remove and save the excess chain. Pull the excess

fixture wires through the Nipple (#24) into the Outlet Box (#18). Wires may be left at full

length or shortened as determined by space in the Outlet Box (#18) to make the wire

connections.

Wrap the ground wire from the fixture around the Ground Screw (#20) on the Mounting Strap

(#23), and then connect the ground wire from the fixture to the ground wire from the Outlet

Box (#18). Connect the wire without writing on it (with raised ribs) from the fixture to the

white wire (neutral wire) from the Outlet Box (#18). Connect the wire with writing on it from

the fixture to the black wire (live wire) from the Outlet Box (#18). Cover the three

connections using the three Wire Connectors (#19). Wrap the three wire connections with

electrical tape for a more secure connection. Position the wires back inside the Outlet Box

(#18). Note: If you have electrical questions, consult your local electrical code for approved

grounding methods.

Place the Canopy (#1) over the Nipple (#24) all the way to the ceiling. Tighten the Ring (#4)

onto the Screw Collar Loop (#2) until the Canopy (#1) is held firmly against the ceiling.

Installation is complete. Turn on the power at the circuit breaker or fuse box. Turn the light

switch on to activate the fixture.

Page is loading ...

Page 8

TROUBLESHOOTING:

PRODUCT MAINTENANCE:

1. To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean

water, never a solvent) to wipe the glass and surface of the fixture.

2. To clean the inside of the fixture, first disconnect power to the fixture by turning off the

circuit breaker or by removing the fuse at the fuse box. Next, use a dry or slightly

dampened clean cloth (use clean water, never a solvent) to wipe the surface of the fixture.

3. Do not use any cleaners with chemicals, solvents or harsh abrasives. Use only a dry soft

cloth to dust or wipe carefully.

LIMITED WARRANTY

The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period

of five (5) years from date of purchase. This warranty applies only to the original consumer purchaser and only

to products used in normal use and service. If this product is found to be defective, the manufacturer’s only

obligation, and your exclusive remedy, is the repair or replacement of the product at the manufacturer’s

discretion, provided that the product has not been damaged through misuse, abuse, accident, modifications,

alterations, neglect or mishandling. This warranty shall not apply to any product that is found to have been

improperly installed, set-up, or used in any way not in accordance with the instructions supplied with the product.

This warranty shall not apply to a failure of the product as a result of an accident, misuse, abuse, negligence,

alteration, or faulty installation, or any other failure not relating to faulty material or workmanship. This

warranty shall not apply to the finish on any portion of the product, such as surface and/or weathering, as this is

considered normal wear and tear. The manufacturer does not warrant and specially disclaims any warranty,

whether express or implied, of fitness for a particular purpose, other than the warranty contained herein.

The manufacturer specifically disclaims any liability and shall not be liable for any consequential or

incidental loss or damage, including but not limited to any labor / expense costs involved in the

replacement or repair of said product.

Problem Possible Cause Corrective Action

1. Light bulb is burned out. 1. Replace light bulb.

2. Power is off. 2. Make sure power supply is on.

3. Faulty wire connection. 3. Check wiring.

Light bulb will not

illuminate.

4. Faulty switch. 4. Test or replace switch.

Fuse blows or circuit

breaker trips when light

bulb is illuminated.

Crossed wires or power

wire is grounding out.

Check wire connections.

Page is loading ...

Page 17

MANUEL D'INSTRUCTIONS

Chandelier d'Intérieur 6LM

Collection Charleston

The Home Depot UGS 530-346 (UPC 6940500313719)

Page is loading ...

Hampton Bay FNV0116A Installation guide

Brand: Hampton Bay

Model: FNV0116A

Type: Installation guide

Durable construction: This fixture is made of high-quality materials, so you can be sure that it will last for years to come.
Weather-resistant: This fixture is designed to withstand the elements, so you can be sure that it will look great even after years of exposure to the sun, rain, and snow.

Download PDF

report