Chief KTA1001B Installation guide

Chief
Brand
Chief
Model
KTA1001B
Category
Wall & ceiling mounts accessories
Type
Installation guide

Chief KTA1001B is a versatile accessory that allows you to connect multiple projector arrays to expand your display options. It's compatible with a variety of Chief arrays, including the Double 220, Triple 220, and Triple 320. With its sturdy construction and easy installation process, it's a reliable solution for creating larger and more immersive visual experiences.

Chief KTA1001B is a versatile accessory that allows you to connect multiple projector arrays to expand your display options. It's compatible with a variety of Chief arrays, including the Double 220, Triple 220, and Triple 320. With its sturdy construction and easy installation process, it's a reliable solution for creating larger and more immersive visual experiences.

INSTALLATION INSTRUCTIONS
CHIEF MANUFACTURING INC.
1-800-582-6480 952-894-6280 FAX 952-894-6918
8401 EAGLE CREEK PARKWAY, STE 700
SAVAGE, MINNESOTA 55378 USA
8807-000046
©2006 Chief Manufacturing
www.chiefmfg.com
01/06
BEFORE YOU BEGIN
Array Connector Accessory Kit
Model: FTA-1001
The FTA-1001 array connector accessory is used to attache multiple arrays together to expand the number of available
displays.
CAUTION!
To prevent damage to the Kit, which could affect or void the Factory warranty, and to the equipment that will be
attached to it, thoroughly study all instructions and illustrations before you begin the installation.
• If you have any questions about this installation, contact Chief Manufacturing at 1-800-582-6480.
Model: FTA-1001 Installation Instructions
2
TOOLS REQUIRED FOR INSTALLATION
• Drill and 1/2" drill bit (if mounting through a flat
surface and using grommet accessory)
• 5/32" Hex Wrench
CAUTION!
If two arrays are being installed using the grommet
mount accessory, use the illustration below when
locating grommet holes.
Figure 1: DIMENSIONS
Double 220
Triple 220
Double 220
Triple 320
Model: FTA-1001 Installation Instructions
3
Parts
INSPECT MOUNT BEFORE ASSEMBLY
Carefully inspect components for shipping damage . If
damage is apparent, call your carrier claims agent and do
not continue with installation until the carrier has
reviewed the damage.
Table 1: Parts
ITEM DESCRIPTION QTY
10 BRACKET, Array Connecting 1
20 SCREW, Hex Head Cap, 1/4-20 x 1/2" 2
30 SCREW, Hex Head Cap, 1/4-20 x 3/4" 2
40 NUT, Square, 1/4-20 4
Figure 2: Parts
10
20
30
40
Model: FTA-1001 Installation Instructions
4
INSTALLATION
Mount and Site Preparation
Mount Preparation
To prepare existing mount arrays for connection:
1. Remove end lock from array rail ends to be joined
using 5/32" hex key (120). (see Figure 3)
NOTE: Leave square nut in array rail after removing end
lock.
Figure 3: Remove End Lock
To install the FTA-1001:
1. Insert two square nuts (40) into each rail end.
(see Figure 4)
2. Slide rails together until rail ends meet.
Figure 4: Assemble Square Nuts to Rail
3. Place connecting bracket (10) against rails aligning
holes in connector bracket with square nuts installed
during step 1.
NOTE: The two center square nuts must align with holes
in rail ends.
4. Secure connector bracket outer mounting holes to
array rails using two HHCS (20) making sure each
HHCS threads into a square nut (40). (see Figure 5)
5. Secure connector bracket inner mounting holes to
array rails using two HHCS (30) making sure each
HHCS threads into a square nut (40) and through hole
in array rail. (see Figure 5)
CAUTION!
Center connector mounting screws must go through
square nut and hole in array rail to maintain mount
integrity.
Array rail connection is now complete. Refer to
Installation Instructions provided with mount or other
accessory for additional installation instructions if
required.
Figure 5: Connect Array Rails
End Lock
Square Nut
Array Rail
40
40
Array Rail
Array Rail
10
30
20
20
Array Rail
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Chief KTA1001B Installation guide

Chief
Brand
Chief
Model
KTA1001B
Category
Wall & ceiling mounts accessories
Type
Installation guide

Chief KTA1001B is a versatile accessory that allows you to connect multiple projector arrays to expand your display options. It's compatible with a variety of Chief arrays, including the Double 220, Triple 220, and Triple 320. With its sturdy construction and easy installation process, it's a reliable solution for creating larger and more immersive visual experiences.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents