Aiwa AI1001 Operating instructions

Type
Operating instructions

Aiwa AI1001: True wireless earbuds with Bluetooth connectivity, offering a seamless audio experience for music, calls, and voice assistant activation. Enjoy features like volume control, track navigation, and low latency mode for gaming. The earbuds provide up to 2-3 hours of playtime and come with a charging case for easy power management.

Aiwa AI1001: True wireless earbuds with Bluetooth connectivity, offering a seamless audio experience for music, calls, and voice assistant activation. Enjoy features like volume control, track navigation, and low latency mode for gaming. The earbuds provide up to 2-3 hours of playtime and come with a charging case for easy power management.

Model Number AI1001
Before Use
Wake up Earbuds:
Put the earbuds into the
charging case, then take out
the earbuds from charging case,
this action will exit the
"storage mode" and wake up
earbuds.
Blutooth
Pairing
1. Power on & Pairing
Take out the earbuds from
charging case,the indicators of
Right and Left Earbuds flash
blue and red alternately. If
two earbuds paired
successfully, the indicator of
one earbud will turn off and
the indicator of the other
earbud will flash blue and red
alternately. Binaural
Mode
Power on Manually Press and Hold Left/Right Earbud 3
seconds
Power off Manually Press and Hold Left/Right Earbud 4
seconds
Increase Volume Click Right Earbud
Decrease Volume Click Left Earbud
Next Track Double Clicks Right earbud
Previous Track Double Clicks Left earbud
Music play/Pause Press and Hold Right Earbud 2 seconds
2. Search Pairing Name 2.Search pairing name on
device: AIWA Connect Pro
Voice Assistant Press and Hold Left Earbud 2 seconds
Answer Call Click Left/Right Earbud
End Call Press and Hold Left/Right Earbud 2
seconds
Decline incoming call Double Clicks Left/Right earbud
Low Latency On/Off Triple Clicks Left/Right earbud
3. Connect to Device
3.Click the pairing name,if
connection is succesful, the
light is off.
Monaural
Mode:
Decrease Volume Single Click
Increase Volume Double Clicks
Voice Assistant Press and Hold Right Earbud 2 seconds
Auto shut down after 5 mins, if BT does not connect to
BT device
Reset
Funtion
1.turn off Bluetooth device and turn off bluetooth Earbuds.
2. Take out one earbud from charging case, the indicator light
flashes red and blue alternately, and then click the button
four times quickly to turn off the earbud.
3. Take out the other earbud and repeat the step 2
Charging
Charging (Earbuds) Solid Red
Charging Complete
(Earbuds) Light off
Charging (Charging
case) Blue light flashes
Charging complete
(Charging case) Blue light on
Charging time About 2-3 Hours
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
‐‐ Reorient or relocate the receiving antenna.
‐‐ Increase the separation between the equipment and receiver.
‐‐ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
‐‐ Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that may cause undesired operation.
  • Page 1 1
  • Page 2 2

Aiwa AI1001 Operating instructions

Type
Operating instructions

Aiwa AI1001: True wireless earbuds with Bluetooth connectivity, offering a seamless audio experience for music, calls, and voice assistant activation. Enjoy features like volume control, track navigation, and low latency mode for gaming. The earbuds provide up to 2-3 hours of playtime and come with a charging case for easy power management.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI