Anolis ArcSource Inground User manual

ArcSource Inground
Anolis
Brand
Anolis
Model
ArcSource Inground
Category
Motorcycle Accessories
Type
User manual

Anolis ArcSource Inground is a versatile and powerful in-ground luminaire designed for professional lighting applications. With its compact size and robust construction, it's ideal for illuminating pathways, gardens, and other outdoor areas. It features adjustable beam tilt, allowing for precise control of the light output. Additionally, its durable design ensures reliable performance even in harsh weather conditions.

Anolis ArcSource Inground is a versatile and powerful in-ground luminaire designed for professional lighting applications. With its compact size and robust construction, it's ideal for illuminating pathways, gardens, and other outdoor areas. It features adjustable beam tilt, allowing for precise control of the light output. Additionally, its durable design ensures reliable performance even in harsh weather conditions.

INSTALLATION INSTRUCTIONS
ROBE lighting s. r. o. | Palackeho 416 | 757 01 Valasske Mezirici | Czech Republic | Tel.: +420 571 751 500 | E-mail: [email protected]
www.anolis.eu www.anolislighting.com
ARCSOURCETM INGROUND 24MC
4
VERSION 1 / 12_05_2021
1
The unit must be installed by a qualified electrician in accordance with all applicable regulations including
local and national construction and electrical codes. This device falls under class I and must be grounded!
STEP 1
PREPARE SLEEVE AND LUMINAIRE
 
Power Connection 7mm 70mm
DMX Connection 7mm 70mm
Connection – colour coding
2
Strip these lengths for cable connections.
3
Remove temporary installation sleeve cover plate. Remove junction box cover.
1 2
DMX Connection
0 − +
Data Ground Data - Data +
Power Connection
L N GROUND
Core (EU) Brown Blue Green/Yellow
Core (US) Black White Green
STEP 2
CONNECTION
1Connection
INSTALLATION INSTRUCTIONS
ROBE lighting s. r. o. | Palackeho 416 | 757 01 Valasske Mezirici | Czech Republic | Tel.: +420 571 751 500 | E-mail: [email protected]
www.anolis.eu www.anolislighting.com
ARCSOURCETM INGROUND 24MC
4
VERSION 1 / 12_05_2021
2
Apply Loctite 5331 thread sealant on the plastic holder and
Loctite 577 thread locking compound on the gland body in the
indicated locations prior to assembly.
Failure to properly install cable glands will result in failure
of the water tight seal!
Put cable thru cable gland M20x1.5 and connect into connection
terminal. Assemble cable gland as shown below. Use wrench size
24 for cable gland M20x1.5
Wiring connection
Cover junction box. Before applying the torque, make sure the
thread is clean and functional.
4
STEP 3
CABLE GLAND INSTALLATION
For DMX and Power - EU color code shown
STEP 4
CLOSE JUNCTION BOX
Connection with two cables Connection with one cable
INSTALLATION INSTRUCTIONS
ROBE lighting s. r. o. | Palackeho 416 | 757 01 Valasske Mezirici | Czech Republic | Tel.: +420 571 751 500 | E-mail: [email protected]
www.anolis.eu www.anolislighting.com
ARCSOURCETM INGROUND 24MC
4
VERSION 1 / 12_05_2021
3
STEP 5
INSTALLATION OF ARCSOURCE INGROUND
Insert the ArcSource Inground into the installation sleeve and
adjust it to desired position.
There is a projection and the pad on the sleeve housing and the
notches on the ArcSource Inground in order to facilitate adjusting
of the ArcSource Inground towards the sleeve. The centre of the
notches on the ArcSource Inground also indicates the axis around
which the LED module tilts.
If units are installed in a row, keep the projection on the sleeve
housing on the same side at all units to keep the same direction of
tilting of LED modules.
Secure the ArcSource Inground 24 MC Integral in desired position
Instalace chrániček za sebou
Projection and Notches
Projection and Notches
1 2
3 4
INSTALLATION INSTRUCTIONS
ROBE lighting s. r. o. | Palackeho 416 | 757 01 Valasske Mezirici | Czech Republic | Tel.: +420 571 751 500 | E-mail: [email protected]
www.anolis.eu www.anolislighting.com
ARCSOURCETM INGROUND 24MC
4
VERSION 1 / 12_05_2021
4
Insert top flange on the ArcSource Inground and screw it on the
sleeve. Before applying the torque, make sure the thread is clean
and functional.
The fixture beam can be tilted ±15° from a vertical axis by
means of the item “tilt” in the fixture menu. Adjusted position of
the LED module is permanent kept ,also after disconnected the
fixture from mains. During the tilt adjustment, a white beam will
appear.
STEP 6
BEAM TILT ADJUSTMENT
5
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Anolis ArcSource Inground User manual

ArcSource Inground
Anolis
Brand
Anolis
Model
ArcSource Inground
Category
Motorcycle Accessories
Type
User manual

Anolis ArcSource Inground is a versatile and powerful in-ground luminaire designed for professional lighting applications. With its compact size and robust construction, it's ideal for illuminating pathways, gardens, and other outdoor areas. It features adjustable beam tilt, allowing for precise control of the light output. Additionally, its durable design ensures reliable performance even in harsh weather conditions.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers