NEXAS NexLink Installation guide

Brand
NEXAS
Model
NexLink
Type
Installation guide
How to Install this Device?
From NEXAS
Plug “NEXAS Bluetooth Code Reader” into the car port (The light on the car shows “Red”)
➜ Turn on the “Ignition”
Open the “Bluetooth” of your iOS ➜ Go to the “APP Store” to download the APP
you need ➜ Choose the language of the APP, etc.
Go to the “Main Page” ➜ Click the Top right corner “Tool icon” to the “Settings” ➜
Click the “Connection” ➜ Choose “Bluetooth LE(4.0)” and Click “Select device”
Click “NEXAS20080886” ➜ Connected successfully ➜ Back to the Main Page ➜ Click
the green button “CONNECT”
Shows “Successful connection!” ➜ Shows “ELM connection” and “ECU connection”
➜ Start “Diagnosing” (The light on this device will be “BLUE”)
Tips：
• If the Bluetooth connection fails or the connection is
interrupted, please restart the Bluetooth and re-ignite.
• Please be aware that the Fee listed is for reference only
and may change sometimes. Some apps offer inside-app
purchase. Please check out with APP provider.
Open the “Bluetooth” of your Android ➜ Find AVAILABLE DEVICES “NEXAS20080886” and
Click ➜ Input PIN number “1234” to connect ➜ Successfully Connect
Open the APP you downloaded ➜ The APP will automatically jump to the Bluetooth
connection interface ➜ Find “NEXAS20080886” to connect
Back to the Main Page ➜ Click the green button “CONNECT” ➜ “ELM connection”
and “ECU connection” will be connected ➜ Successfully connection!
Start “Diagnosing” (The light on this device will be “BLUE”)
NEXAS
NexLink Bluetooth 5.0 OBDII Scanner
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

NEXAS NexLink Installation guide

Brand
NEXAS
Model
NexLink
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents