A4-63S-S-*
A4-63S-L*
A4-63Z-S-*
A4-63Z-L*
A4-74S-S-*
A4-74S-L*
A4-74Z-S-*
A4-74Z-L*
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
EG01.12B Rev. 03/09
Catalog Specification Sheet No.
EG01.12B
LIFESTOR
®
Polymer Shelving—Add-On Units
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Eagle Foodservice Equipment, Eagle MHC, SpecFAB
®
, and Retail Display are divisions of Eagle Group. ©2009 by the Eagle Group
Item No.:
Project No.:
S.I.S. No.:
LIFESTOR
®
Polymer Shelving
—Add-On Units
Specification Sheet
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Options / Accessories
Casters
Ledges
Dividers
Drying racks
For custom configuration or fabrication needs, contact our SpecFAB
®
Division.
MODELS:
* See charts for complete model numbers.
Short Form Specifications
Eagle LIFESTOR
®
Polymer Shelving Add-On Unit, model
____________. Unit to consist of four (solid, louvered)
polymer shelves with MICROGARD
®
antimicrobial protection,
two (63˝, 74˝) 1
1
⁄4˝-diameter (stainless steel, zinc plated) posts
grooved at 2˝ increments and (stainless steel, zinc plated) rails.
• Allows for removal or adjustment of intermediate shelves
without disassembling the entire unit.
• Polymer shelving sections are non-corrosive.
• Easy to assemble in minutes—only one person required.
• Shelf sections are dishwasher safe.
• Available in widths of 18˝ and 23˝ (457 and 584mm).
• Add-on kit (see spec sheet #EG01.12C), used with add-on
units, allow for “L”, “T”, or continuous configurations without
using traditional S-hooks.
• Two component choices: economical zinc with clear epoxy
(virtually non-corrosive) or non-corrosive stainless steel.
LIFESTOR
®
four-shelf add-on unit
shelving made of
removable sections
Certifications / Approvals
Features made of injection-molded high strength polymer:
• Shelves—Available in solid or louvered. Shelf sections fit
over rails.
• Side braces**—Each end fits securely into a lug on
the connector.
• Connector kit
- Split sleeve—features interior ridge to lock into the
horizontal grooves of the post.
- 2-sided lug connector—designed for single corner posts.
- 3-sided lug connector—designed for an “L” or continuous
shape where two shelf corners join together.
- 4-sided lug connector—designed to be a universal
connector and also for a “T” shape where three corners join
together. The 4-sided lug connector is supplied with all units
unless the 2-sided or 3-sided lug connectors are specified.
Features available in zinc with clear epoxy or stainless steel:
• Posts—1
1
⁄4˝ (32mm) outside diameter, grooved for positive
positioning of the connector kit. Includes top cap and
adjustable foot.
• Rails—1
1
⁄4˝ (32mm) outside diameter. Components on each
end are of injection-molded high strength polymer.
** Side braces are available in zinc with clear epoxy or stainless steel finish upon request.
MICROGARD
®
is standard on all LIFESTOR
®
Shelving.
MICROGARD
®
is an antimicrobial agent which contains
built-in protection to retard the growth of a broad range of
bacteria, mold and mildew on shelf surface that causes
stains, odors and degradation.
Mobile application option available
**Stainless steel or zinc side braces are necessary for use with casters. See
spec sheet EG01.12C for additional information on casters for LIFESTOR
®
.
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for
typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.
Catalog Specification Sheet No.
LIFESTOR
®
Polymer Shelving—Add-On Units
Item No.:
Project No.:
S.I.S. No.:
Rev. 03/09
Printed in U.S.A.
©2009 by Eagle Group
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
EG01.12B
LIFESTOR
®
Polymer Shelving—Add-On Units
units with four units with four units with four units with four shelf shelf
solid shelves louvered shelves solid shelves louvered shelves width length weight
model # model # model # model # in. mm in. mm lbs. kg
A4-63S-S1824PM A4-63S-L1824PM A4-63Z-S1824PM A4-63Z-L1824PM 18˝ 457 24˝ 610 35 15.9
A4-63S-S1830PM A4-63S-L1830PM A4-63Z-S1830PM A4-63Z-L1830PM 18˝ 457 30˝ 762 45 20.4
A4-63S-S1836PM A4-63S-L1836PM A4-63Z-S1836PM A4-63Z-L1836PM 18˝ 457 36˝ 914 53 24.0
A4-63S-S1842PM A4-63S-L1842PM A4-63Z-S1842PM A4-63Z-L1842PM 18˝ 457 42˝ 1067 58 26.4
A4-63S-S1848PM A4-63S-L1848PM A4-63Z-S1848PM A4-63Z-L1848PM 18˝ 457 48˝ 1219 63 28.6
A4-63S-S1854PM A4-63S-L1854PM A4-63Z-S1854PM A4-63Z-L1854PM 18˝ 457 54˝ 1372 71 32.7
A4-63S-S1860PM A4-63S-L1860PM A4-63Z-S1860PM A4-63Z-L1860PM 18˝ 457 60˝ 1524 77 34.9
A4-63S-S2324PM A4-63S-L2324PM A4-63Z-S2324PM A4-63Z-L2324PM 23˝ 584 24˝ 610 41 18.6
A4-63S-S2330PM A4-63S-L2330PM A4-63Z-S2330PM A4-63Z-L2330PM 23˝ 584 30˝ 762 53 24.0
A4-63S-S2336PM A4-63S-L2336PM A4-63Z-S2336PM A4-63Z-L2336PM 23˝ 584 36˝ 914 63 28.6
A4-63S-S2342PM A4-63S-L2342PM A4-63Z-S2342PM A4-63Z-L2342PM 23˝ 584 42˝ 1067 70 31.8
A4-63S-S2348PM A4-63S-L2348PM A4-63Z-S2348PM A4-63Z-L2348PM 23˝ 584 48˝ 1219 75 34.0
A4-63S-S2354PM A4-63S-L2354PM A4-63Z-S2354PM A4-63Z-L2354PM 23˝ 584 54˝ 1372 87 39.5
A4-63S-S2360PM A4-63S-L2360PM A4-63Z-S2360PM A4-63Z-L2360PM 23˝ 584 60˝ 1524 95 43.1
Stainless Steel
finish EAGLEbrite
®
Zinc finish
Add-On Units with 63˝ (1600mm)-high Posts
All shelving units listed below feature two posts and four shelves. Add-on kit required (see spec sheet EG01.12C).
units with four units with four units with four units with four shelf shelf
solid shelves louvered shelves solid shelves louvered shelves width length weight
model # model # model # model # in. mm in. mm lbs. kg
A4-74S-S1824PM A4-74S-L1824PM A4-74Z-S1824PM A4-74Z-L1824PM 18˝ 457 24˝ 610 37 16.7
A4-74S-S1830PM A4-74S-L1830PM A4-74Z-S1830PM A4-74Z-L1830PM 18˝ 457 30˝ 762 47 21.3
A4-74S-S1836PM A4-74S-L1836PM A4-74Z-S1836PM A4-74Z-L1836PM 18˝ 457 36˝ 914 55 24.9
A4-74S-S1842PM A4-74S-L1842PM A4-74Z-S1842PM A4-74Z-L1842PM 18˝ 457 42˝ 1067 60 27.2
A4-74S-S1848PM A4-74S-L1848PM A4-74Z-S1848PM A4-74Z-L1848PM 18˝ 457 48˝ 1219 65 29.4
A4-74S-S1854PM A4-74S-L1854PM A4-74Z-S1854PM A4-74Z-L1854PM 18˝ 457 54˝ 1372 73 33.1
A4-74S-S1860PM A4-74S-L1860PM A4-74Z-S1860PM A4-74Z-L1860PM 18˝ 457 60˝ 1524 80 36.3
A4-74S-S2324PM A4-74S-L2324PM A4-74Z-S2324PM A4-74Z-L2324PM 23˝ 584 24˝ 610 43 19.5
A4-74S-S2330PM A4-74S-L2330PM A4-74Z-S2330PM A4-74Z-L2330PM 23˝ 584 30˝ 762 55 24.9
A4-74S-S2336PM A4-74S-L2336PM A4-74Z-S2336PM A4-74Z-L2336PM 23˝ 584 36˝ 914 65 29.4
A4-74S-S2342PM A4-74S-L2342PM A4-74Z-S2342PM A4-74Z-L2342PM 23˝ 584 42˝ 1067 68 30.8
A4-74S-S2348PM A4-74S-L2348PM A4-74Z-S2348PM A4-74Z-L2348PM 23˝ 584 48˝ 1219 77 34.9
A4-74S-S2354PM A4-74S-L2354PM A4-74Z-S2354PM A4-74Z-L2354PM 23˝ 584 54˝ 1372 89 40.3
A4-74S-S2360PM A4-74S-L2360PM A4-74Z-S2360PM A4-74Z-L2360PM 23˝ 584 60˝ 1524 98 44.5
Stainless Steel
finish EAGLEbrite
®
Zinc finish
Add-On Units with 74˝ (1880mm)-high Posts
various configurations of the starter (S) and add-on (A) units
“L” shape
configuration
Continuous
configuration
S
S
A
A
Add-On Kit
required
S
A
A
Add-On
Kit
required
“T” shape configuration
/
