A4-63S-S-*
A4-63S-L*
A4-63Z-S-*
A4-63Z-L*
A4-74S-S-*
A4-74S-L*
A4-74Z-S-*
A4-74Z-L*
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
EG01.12B Rev. 03/09
Catalog Specification Sheet No.
EG01.12B
LIFESTOR
®
Polymer Shelving—Add-On Units
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Eagle Foodservice Equipment, Eagle MHC, SpecFAB
®
, and Retail Display are divisions of Eagle Group. ©2009 by the Eagle Group
Item No.:
Project No.:
S.I.S. No.:
LIFESTOR
®
Polymer Shelving
—Add-On Units
Specification Sheet
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Options / Accessories
Casters
Ledges
Dividers
Drying racks
For custom configuration or fabrication needs, contact our SpecFAB
®
Division.
MODELS:
* See charts for complete model numbers.
Short Form Specifications
Eagle LIFESTOR
®
Polymer Shelving Add-On Unit, model
____________. Unit to consist of four (solid, louvered)
polymer shelves with MICROGARD
®
antimicrobial protection,
two (63˝, 74˝) 1
1
⁄4˝-diameter (stainless steel, zinc plated) posts
grooved at 2˝ increments and (stainless steel, zinc plated) rails.
• Allows for removal or adjustment of intermediate shelves
without disassembling the entire unit.
• Polymer shelving sections are non-corrosive.
• Easy to assemble in minutes—only one person required.
• Shelf sections are dishwasher safe.
• Available in widths of 18˝ and 23˝ (457 and 584mm).
• Add-on kit (see spec sheet #EG01.12C), used with add-on
units, allow for “L”, “T”, or continuous configurations without
using traditional S-hooks.
• Two component choices: economical zinc with clear epoxy
(virtually non-corrosive) or non-corrosive stainless steel.
LIFESTOR
®
four-shelf add-on unit
shelving made of
removable sections
Certifications / Approvals
Features made of injection-molded high strength polymer:
• Shelves—Available in solid or louvered. Shelf sections fit
over rails.
• Side braces**—Each end fits securely into a lug on
the connector.
• Connector kit
- Split sleeve—features interior ridge to lock into the
horizontal grooves of the post.
- 2-sided lug connector—designed for single corner posts.
- 3-sided lug connector—designed for an “L” or continuous
shape where two shelf corners join together.
- 4-sided lug connector—designed to be a universal
connector and also for a “T” shape where three corners join
together. The 4-sided lug connector is supplied with all units
unless the 2-sided or 3-sided lug connectors are specified.
Features available in zinc with clear epoxy or stainless steel:
• Posts—1
1
⁄4˝ (32mm) outside diameter, grooved for positive
positioning of the connector kit. Includes top cap and
adjustable foot.
• Rails—1
1
⁄4˝ (32mm) outside diameter. Components on each
end are of injection-molded high strength polymer.
** Side braces are available in zinc with clear epoxy or stainless steel finish upon request.
MICROGARD
®
is standard on all LIFESTOR
®
Shelving.
MICROGARD
®
is an antimicrobial agent which contains
built-in protection to retard the growth of a broad range of
bacteria, mold and mildew on shelf surface that causes
stains, odors and degradation.
Mobile application option available
**Stainless steel or zinc side braces are necessary for use with casters. See
spec sheet EG01.12C for additional information on casters for LIFESTOR
®
.