Kmart 43199372 User manual

Screw in A

IM_43199372

5028A4单面

LOW VOLTAGE CHRISTMAS LAMP POST

D (See Installation and Instruction below).

Installation and Instruction

1.This lamp post set is suitable for INDOOR USE ONLY.

2.Screw in the top pole into the pole of the basin(Figure A), Connect the lights chains's connector of the top

pole and the bottom pole (Figure B),Plug the lead wire plug to the adaptor socket (Figure C).

3. The adaptor MUST be installed INDOORS away from weather.

4. Do not position or place near heaters or any other direct sources of heat.

5. This product is suitable for positioning on surfaces which have normal flammability, e.g. wood,

plasterboard, masonry. However, this does not include highly flammable surfaces (e.g.polystyrene, textiles).

6. Always position cables and extension leads so that they will not be a hazard to the elderly,pets and children.

7. DO NOT position this set where it may become covered by other items e.g.curtains,nets or bedding.

8. Ensure the unit(s) is positioned so that you have elnough cable to reach an indoor mains power socket.

43199372

4.5V1.35W-E3

lamp post set

and pet.

This lamp post set is not for room illumination.

light set.