2. DirekTronik
  3. 20110213

DirekTronik 20110213 Owner's manual

  • I've analysed the provided user manual for the ENOC LL LED-A LED Light with proximity sensor. This document describes the dual mode functionality of this light, focusing on proximity and motion detection modes. It also specifies mounting options using screws or magnets. I'm ready to answer your questions about its features and usage based on the manual.
  • What is the ideal use for proximity detection mode?
    When will the light switch on in proximity detection mode?
    What is the ideal use for switching through motion mode?
    How can the light be mounted on F1/S1 cabinets?
    How can the light be mounted on other cabinets?
USER MANUAL
54582
LL LED-A
LED Light with proximity sensor
FUNCTION
OPTION 1 – Proximity detection mode
Ideal mode for F1/S1 cabinets with doors installed. Lights is switched on when door is
opened and switched off when door is closed.
OPTION 2 – Switching through motion mode
Ideal mode for frames without doors or cabinets where placement of the light close to the
door is possible.
MOUNTING
On F1/S1 use the include screws to fix the LL LED-A light in the top aluminum profile.
On all other cabinets, fix the light with built in magnetic in any position required.
TECHNICAL DATA
LED light unit
Rated current: 300 mA DC
Rated power: 3.6 W
Luminance: 180 LM
Light emitting angle: 120°
Color temperature: 6000-6500 K
Product life: 30000 h
Power adaptor
Rated input voltage: 110-240 VAC 50/60 Hz
Rated output voltage: 12V DC
Constant output current: 300 mA DC
Cable length: 3 m
Working condition: 0°C - 55°C, 10%-90%
/